Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Suspension, propshaft |
| Weight | 0.325 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.27
Important compatibility info
| Weight | 1.058 kg |
| Type | Cylinder Liner, air compressor |
| Function | Cylinder Liner, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.29
Important compatibility info
| Function | Repair Set, propshaft centre bearing |
| Weight | 1.132 kg |
| Type | Repair Set, propshaft centre bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (31852)
- 2x Febi Protective Cover, propshaft centre bearing (171020)
- 1x Febi Boot, propshaft (36794)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38762)
£84.30
Important compatibility info
| Function | Repair Set, propshaft centre bearing |
| Weight | 1.016 kg |
| Type | Repair Set, propshaft centre bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (31851)
- 2x Febi Protective Cover, propshaft centre bearing (171020)
- 1x Febi Boot, propshaft (36794)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38762)
£84.30
Important compatibility info
| Weight | 0.22 kg |
| Function | Shaft Seal, crankshaft |
| Inner diameter | 85 mm |
| Outer diameter | 105 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Width | 160 mm |
| Placement on Vehicle | transmission sided |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.30
Important compatibility info
| Weight | 1.542 kg |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
| Length | 278 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 185207 |
| Camber correction | 0.5 ° |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.32
Important compatibility info
| Weight | 10.2 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 54.6 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.5 mm |
| Bolt Hole Circle Diameter | 115 mm |
| Centering Diameter | 72.6 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.34
Important compatibility info
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Joint, propshaft |
| Weight | 1.28 kg |
| Additional Information 2 | with bolts/screws, with washers |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (21191)
- 6x Febi Screw (19106)
- 6x Febi Washer (19107)
- 6x Febi Nut (19104)
£84.38
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.144 kg |
| Cable Length | 1205 mm |
| Number of circuits | 6 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.40
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Operating Mode | Automatic |
| Weight | 3.221 kg |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.40
Important compatibility info
| Number of mounting bores | 1 |
| Weight | 16.46 kg |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Rotor Style | perforated/vented |
| Function | Brake Disc |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 34 mm |
| Brake Disc Thickness | 36 mm |
| Thickness | 76 mm |
| Outer diameter | 360 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.42
Important compatibility info
| Weight | 1.22 kg |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal, with oil cooler, with oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.43
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information 2 | with bolts/screws, with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 27 |
| Weight | 5.994 kg |
| Number of Teeth, ABS ring | 48 |
| Min. Length | 595 mm |
| ABS Ring Diameter | 83 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 96 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.44
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Left |
| Bore Diameter | 8.5 mm |
| Min. Length | 613 mm |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 94 mm |
| Number of mounting bores | 6 |
| Thread Size | M24x1,5 |
| Wheel Sided Joint Diameter | 83 mm |
| External Teeth, Wheel Side | 27 |
| Bolt Hole Circle Diameter | 79.9 mm |
| Weight | 5.412 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.44
Important compatibility info
| Operating pressure to | 8 bar |
| Function | Hydraulic Pump, steering |
| Weight | 3.100 kg |
| Number of mounting bores | 4 |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Pulleys | with belt pulley |
| Inner diameter | 20 mm |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.56
Important compatibility info
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5, M14 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 169 mm. 228 mm |
| Thickness | 190 mm. 625 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Weight | 6.05 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.57
Important compatibility info
| Weight | 1.126 kg |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 960 mm |
| Inner length 2 | 880 mm |
| Outer length 1 | 1245 mm |
| Outer length 2 | 1137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.59
Important compatibility info
| Water pump impeller material | Plastic |
| Belts | with trapezoidal tooth profile |
| Weight | 1.85 kg |
| Width | 25 mm |
| Number of Teeth | 116 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26818)
- 1x Febi Water Pump, engine cooling (21879)
£84.64
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 29.4 mm |
| Brake Disc Thickness | 32 mm |
| Thickness | 64.4 mm |
| Weight | 10.61 kg |
| Type | Brake Disc Rotor |
| Machining | High-carbon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.64
Important compatibility info
| Replaces | 43701 |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 1.45 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.65
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023