Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Weight | 0.84 kg |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 0.590 kg |
| Placement on Vehicle | Right Rear |
| Operating Mode | Electric |
| Paired article numbers | 27347 |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 0.217 kg |
| Number of Connectors / Ports | 3 |
| Type | Level switch, condensation water level |
| Function | Level switch, condensation water level |
| Cable Length | 850 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Weight | 5.582 kg |
| Paired article numbers | 181050 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 1.7 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 310 mm |
| Min. Length | 224 mm |
| Pipe Diameter | 38 mm. 52 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber, driver cab suspension |
| Replaces | 45924 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 2.500 kg |
| Type | Clutch Release Bearing |
| Replaces | 105257 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 62 mm |
| Outer diameter | 91 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 33 mm |
| Weight | 5.130 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 67 mm |
| Outer diameter 2 | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Weight | 0.9 kg |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Hole Spacing | 188 mm |
| Weight | 0.484 kg |
| Length | 212 mm |
| Inner diameter | 50 mm |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (171929)
- 1x Febi Bearing, propshaft centre bearing (05362)
£79.98
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 23 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Inner diameter | 16 mm |
| Material | Steel |
| Weight | 10.398 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 175615 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 360 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 45 mm. 62 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Piston conrod diameter | 18 mm |
| Weight | 3.75 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Length | 850 mm |
| Function | Centre Rod Assembly |
| Cone Size | 26 mm |
| Weight | 7.2 kg |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 28 |
| Additional Information 2 | with nut |
| Thread Size | M24 x 1,5 |
| Paired article numbers | 182962 |
| External Teeth, Diff.Side | 39 |
| Weight | 11.004 kg |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 1117 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 3.31 kg |
| Placement on Vehicle | Right Rear, Lower |
| Material | Cast Steel |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 40571 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36329)
- 1x Febi Bolt, control arm (37661)
- 1x Febi Bolt, control arm (37638)
- 2x Febi Nut (37412)
£79.98
Important compatibility info
| Weight | 3.811 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 18803 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with hydro mount, with holder, with lock nut |
| Additional Information 2 | with ball joint |
| Additionally Required Parts | 7 12 9 906 196, 31 10 6 757 145, 31 10 6 772 199 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12528)
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
£79.98
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Weight | 2.780 kg |
| Parameter | 7PK |
| Width | 26 mm |
| Outer diameter | 168 mm |
| Inner diameter | 59 mm |
| Number of Ribs | 6 |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31212)
£79.98
Important compatibility info
| Weight | 0.408 kg |
| Function | Chain Kit, oil pump drive |
| Extra Description | Standard Medium Kit |
| Number of Chain Links | 44 |
| Type | Chain Kit, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain Kit, oil pump drive (109479)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
- 1x Febi Screw (48337)
£79.98
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| Weight | 5.561 kg |
| External Teeth, Diff.Side | 23 |
| Min. Length | 655 mm |
| Wheel Sided Joint Diameter | 82.4 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| for OE number | 03G 115 105 |
| Additional Information 2 | with gear |
| Weight | 0.610 kg |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Cone Size | 28.6 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Pipe Diameter | 40 mm |
| Width | 40 mm |
| Thickness | 115 mm |
| Length | 743 mm |
| Weight | 7.05 kg |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023