Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 130 mm |
| Width | 130 mm |
| Thickness | 100.9 mm |
| Weight | 4.136 kg |
| Hole Spacing | 92 mm |
| Function | Cylinder Liner, air compressor |
| Type | Cylinder Liner, air compressor |
| Additional Information | with retaining rings, with piston, with piston rings, with piston pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Right |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 1010 mm |
| Inner length 1 | 965 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 1.332 kg |
| Outer length 1 | 1225 mm |
| Outer length 2 | 1300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 285 mm |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 36 mm |
| Mounting points diameter | 4.2 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Weight | 3.25 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Length | 733 mm. 783 mm |
| Weight | 6.7 kg |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 1.385 kg |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Number of Ribs | 7 |
| Outer diameter | 74 mm |
| Track rollers material | Plastic |
| Material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Internally Vented |
| Weight | 10.110 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 52.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 96.3 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.99
Important compatibility info
| Paired article numbers | 183086 |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 89 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information | with Split Pin |
| Min. Length | 613 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 29 |
| Weight | 7.860 kg |
| External Teeth, Wheel Side | 29 |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.01
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.062 kg |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | Exhaust Turbocharger |
| Cable Length | 366 mm |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.05
Important compatibility info
| Weight | 1.443 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 213 240 24 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.08
Important compatibility info
| Outer diameter | 246 mm |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Number of Connectors / Ports | 4 |
| Weight | 6.3 kg |
| Capacity | 15 l |
| Operating Pressure | 15 bar |
| Type | Air Tank, compressed-air system |
| Material | Steel |
| Length | 399 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.11
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 78.2 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 9.39 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.12
Important compatibility info
| Surface | Coated |
| Mounting points diameter | 14.5 mm |
| Bolt Hole Circle Diameter | 111 mm |
| Centering Diameter | 83 mm |
| Outer diameter | 301 mm |
| Minimum thickness | 27 mm |
| Thickness | 59 mm |
| Brake Disc Thickness | 30 mm |
| Function | Brake Disc |
| Weight | 10.3 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 9 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.13
Important compatibility info
| for OE number | 11 31 8 590 950 S1 |
| Number of Chain Links | 86 |
| Timing Chain Size | G53HS-7, G53HS-8 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Chain Type | Simplex, with chain lock |
| Surface | Coated |
| Weight | 0.425 kg |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28725)
- 1x Febi Guide, timing chain (177200)
£84.13
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197575 |
| Number of Connectors / Ports | 6 |
| Weight | 0.9 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.14
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.067 kg |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 984 mm |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.15
Important compatibility info
| Weight | 4.0 kg |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39351 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
Technical Information
After mounting the screw of the back-end control arm bush has to be tightened with 55 Nm + 90° + 15°
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (36595)
£84.16
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 321 mm |
| Thickness | 52.2 mm |
| Brake Disc Thickness | 29.8 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Weight | 10.04 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.19
Important compatibility info
| Weight | 1.20 kg |
| Placement on Vehicle | Front |
| Voltage | 12 V |
| Function | Wiper Motor |
| Type | Wiper Motor |
| Number of Connectors / Ports | 5 |
| Additional Information 2 | with nut, with bolts/screws |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.19
Important compatibility info
| Lambda Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| External Thread Size | M18 x 1,5 |
| Cable Length | 330 mm |
| Placement on Vehicle | Right Front |
| Spanner Size | 22 |
| Weight | 0.087 kg |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.22
Important compatibility info
| Weight | 1.815 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| for OE number | 967 241 00 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.24
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.098 kg |
| Function | Sensor, compressed-air system |
| Type | Sensor, compressed-air system |
| Shifting Points | 8 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.24
Important compatibility info
| Weight | 8.46 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 324 mm |
| Thickness | 52.7 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.24
Important compatibility info
| Weight | 1.058 kg |
| Type | Cylinder Liner, air compressor |
| Function | Cylinder Liner, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.29
Important compatibility info
| Function | Repair Set, propshaft centre bearing |
| Weight | 1.016 kg |
| Type | Repair Set, propshaft centre bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (31851)
- 2x Febi Protective Cover, propshaft centre bearing (171020)
- 1x Febi Boot, propshaft (36794)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38762)
£84.30
Important compatibility info
| Function | Repair Set, propshaft centre bearing |
| Weight | 1.132 kg |
| Type | Repair Set, propshaft centre bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (31852)
- 2x Febi Protective Cover, propshaft centre bearing (171020)
- 1x Febi Boot, propshaft (36794)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38762)
£84.30
Important compatibility info
| Weight | 1.542 kg |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
| Length | 278 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 185207 |
| Camber correction | 0.5 ° |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.32
Important compatibility info
| Weight | 10.2 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 54.6 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.5 mm |
| Bolt Hole Circle Diameter | 115 mm |
| Centering Diameter | 72.6 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.34
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Operating Mode | Automatic |
| Weight | 3.221 kg |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.40
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.144 kg |
| Cable Length | 1205 mm |
| Number of circuits | 6 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.40
Important compatibility info
| Number of mounting bores | 1 |
| Weight | 16.46 kg |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Rotor Style | perforated/vented |
| Function | Brake Disc |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 34 mm |
| Brake Disc Thickness | 36 mm |
| Thickness | 76 mm |
| Outer diameter | 360 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.42
Important compatibility info
| Weight | 1.22 kg |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal, with oil cooler, with oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.43
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information 2 | with bolts/screws, with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 27 |
| Weight | 5.994 kg |
| Number of Teeth, ABS ring | 48 |
| Min. Length | 595 mm |
| ABS Ring Diameter | 83 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 96 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.44
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Left |
| Bore Diameter | 8.5 mm |
| Min. Length | 613 mm |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 94 mm |
| Number of mounting bores | 6 |
| Thread Size | M24x1,5 |
| Wheel Sided Joint Diameter | 83 mm |
| External Teeth, Wheel Side | 27 |
| Bolt Hole Circle Diameter | 79.9 mm |
| Weight | 5.412 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.44
Important compatibility info
| Placement on Vehicle | Cylinder Head, Left |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 188253 |
| Colour | Grey |
| Weight | 0.827 kg |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.52
Important compatibility info
| Placement on Vehicle | Cylinder Head, Right |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 188252 |
| Colour | Grey |
| Weight | 0.796 kg |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.52
Important compatibility info
| Operating pressure to | 8 bar |
| Function | Hydraulic Pump, steering |
| Weight | 3.100 kg |
| Number of mounting bores | 4 |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Pulleys | with belt pulley |
| Inner diameter | 20 mm |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.56
Important compatibility info
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5, M14 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 169 mm. 228 mm |
| Thickness | 190 mm. 625 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Weight | 6.05 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.57
Important compatibility info
| Weight | 1.126 kg |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 960 mm |
| Inner length 2 | 880 mm |
| Outer length 1 | 1245 mm |
| Outer length 2 | 1137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.59
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 29.4 mm |
| Brake Disc Thickness | 32 mm |
| Thickness | 64.4 mm |
| Weight | 10.61 kg |
| Type | Brake Disc Rotor |
| Machining | High-carbon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.64
Important compatibility info
| Replaces | 43701 |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 1.45 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.65
Important compatibility info
| Weight | 1.2 kg |
| Placement on Vehicle | frontal sided |
| Material | Metal |
| Type | Housing Cover, crankcase |
| Sealing lip material | PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) |
| Function | Housing Cover, crankcase |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.65
Important compatibility info
| Rim Hole Number | 12 -Hole |
| Weight | 11.960 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 310 mm |
| Thickness | 57 mm |
| Brake Disc Thickness | 42 mm |
| Minimum thickness | 39 mm |
| Bolt Hole Circle Diameter | 136 mm |
| Centering Diameter | 110 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.66
Important compatibility info
| for OE number | 1806 721 |
| Weight | 4.380 kg |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| External Thread Size | M12 x 1,75 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.66
Important compatibility info
| Weight | 1.420 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (104273)
- 1x Febi Nut (34653)
- 5x Febi Screw (104749)
£84.69
Important compatibility info
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 2.030 kg |
| for OE number | 4M0 199 371 GM |
| Number of Connectors / Ports | 2 |
| Replaces | 172191 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.71
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 5.620 kg |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.72
Important compatibility info
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Weight | 7.410 kg |
| Type | Shock Absorber |
| Max. Length | 692 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Bore Diameter | 16 mm |
| Shock Absorber Design | Suspension Strut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Min. Length | 498 mm |
| Pipe Diameter | 58 mm |
| Shock Absorber Type | Oil Pressure |
| Piston conrod diameter | 25 mm |
| Mounting bores distance | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.72
Important compatibility info
| Weight | 1.230 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 881 mm |
| Inner length 2 | 962 mm |
| Outer length 1 | 1159 mm |
| Outer length 2 | 1255 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.73
Important compatibility info
| Weight | 7.7 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 294 mm |
| Thickness | 84 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 21 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 84 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.74
Important compatibility info
| Rotor Style | Solid |
| Weight | 8.564 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 278 mm |
| Brake Disc Thickness | 13 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.76
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023