Proud to be a UK-based company
Contact us
Important compatibility info
| Operating Mode | Pneumatic |
| Weight | 2.51 kg |
| Max. Length | 315 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 81 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.90
Important compatibility info
| Weight | 8.5 kg |
| Placement on Vehicle | Front Axle |
| Length | 785 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 7.55 kg |
| Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
| Length | 882 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Function | Tilt Pump, driver cab |
| Weight | 2.367 kg |
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 2 |
| Operating Mode | Manual |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 0.524 kg |
| Material | FPM (fluoride rubber), MVQ (silicone rubber) |
| Inner diameter | 90 mm |
| Colour | Red |
| Function | Charge Air Hose |
| Additional Information 2 | with clamps |
| Extra Description | ProKit |
| Type | Charge Air Hose |
| Wall Thickness | 4 mm |
| Hose Length | 160 mm |
| Outer diameter | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (30183)
- 2x Febi Fastening Clamp, charge air hose (39027)
£85.92
Important compatibility info
| Weight | 3.180 kg |
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with oil sump gasket |
| for OE number | 06 52 133 S1 |
| Seal Material | NBR (nitrile butadiene rubber) |
| Wet Sump Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (29469)
- 1x Febi Gasket, oil sump (04610)
£85.92
Important compatibility info
| Internal Thread Size | M30 x 1,5 LHT |
| External Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Length | 925 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Weight | 9.4 kg |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Function | Door Lock |
| Internal Thread Size | M8 x 1,25 |
| Weight | 2.0 kg |
| Placement on Vehicle | Right Front |
| Length | 92 mm |
| Width | 86 mm |
| Thickness | 72 mm |
| Type | Door Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Fill quantity | 12 l |
| Additional Information | with lids |
| Weight | 3.710 kg |
| Length | 471 mm |
| Width | 264 mm |
| Material | PP (Polypropylene) |
| Thickness | 440 mm |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 2.630 kg |
| Width | 19 mm |
| Additional Information | with gaskets/seals, with fastening/mounting material |
| Number of Teeth | 99 |
| Surface | Coated |
| for OE number | 23356-42500 S5 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Width of castor bearing surface | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26114)
- 1x Febi Water Pump, engine cooling (173143)
£85.92
Important compatibility info
| Transmission-side joint diameter | 85.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 105 mm |
| Min. Length | 638 mm |
| External Teeth, Diff.Side | 37 |
| Placement on Vehicle | Front Axle Left |
| Weight | 7.692 kg |
| External Teeth, Wheel Side | 38 |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Weight | 1.587 kg |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 38 mm |
| Outer diameter | 70.3 mm |
| Inner diameter | 25 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 5.916 kg |
| Paired article numbers | 182626 |
| Material | Sheet Steel |
| Steering arm type | Control Arm, Four-Point Link (CV) |
| Placement on Vehicle | Front Axle Left, Lower, outer |
| Additional Information 2 | with ball joint |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Additional Information | with seal rings |
| Function | Oil Cooler, automatic transmission |
| Material | Aluminium |
| Transmission Type | Automatic Transmission |
| Weight | 0.740 kg |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (100131)
- 2x Febi Seal Ring (100121)
£85.92
Important compatibility info
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 182625 |
| Weight | 5.916 kg |
| Placement on Vehicle | Front Axle Right, Lower, outer |
| Material | Sheet Steel |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Outer diameter | 110 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 28 mm |
| Track rollers material | Metal |
| Housing material | Aluminium |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 1.35 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Tensioner, v-ribbed belt (04001)
- 1x Febi Vibration Damper, v-ribbed belt (08109)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (07021)
£85.92
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 6.103 kg |
| Placement on Vehicle | Front Axle |
| Length | 780 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 22 mm. 26 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M18 x 1,5, M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1.1 kW |
| Weight | 3.3 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Operating Mode | Electronic |
| Number of Connectors / Ports | 2 |
| Function | Boost Pressure Control Valve |
| Weight | 0.21 kg |
| Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Paired article numbers | 175989 |
| Weight | 1.003 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Placement on Vehicle | Exhaust Side |
| Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023