Important compatibility info
Weight | 0.789 kg |
Placement on Vehicle | from hydraulic pump to steering gear |
Function | Hydraulic Hose, steering |
Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Front, both sides |
Weight | 1.114 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Pneumatic |
Weight | 2.51 kg |
Max. Length | 315 mm |
Min. Length | 280 mm |
Pipe Diameter | 81 mm |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.630 kg |
Width | 19 mm |
Additional Information | with gaskets/seals, with fastening/mounting material |
Number of Teeth | 99 |
Surface | Coated |
for OE number | 23356-42500 S5 |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Belts | with rounded tooth profile |
Width of castor bearing surface | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26114)
- 1x Febi Water Pump, engine cooling (173143)
Important compatibility info
Weight | 3.204 kg |
Placement on Vehicle | transmission sided |
Additional Information 2 | with bolts/screws |
Function | Release Fork, clutch |
Extra Description | febi Plus |
Type | Release Fork, clutch |
Additional Information | with cross pin, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Release Fork, clutch (22752)
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 26 |
Weight | 8.638 kg |
External Teeth, Diff.Side | 34 |
Min. Length | 925 mm |
Wheel Sided Joint Diameter | 82 mm |
Transmission-side joint diameter | 82.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner length 1 | 1035 mm |
Inner length 2 | 1093 mm |
Driver Position | for right-hand drive vehicles |
Weight | 1.384 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Outer length 1 | 1374 mm |
Outer length 2 | 1287 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.774 kg |
Function | Steering Column Switch |
Combi Switch Function | with indicator function |
Number of Connectors / Ports | 10 |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Weight | 0.717 kg |
Type | Belt Tensioner, v-ribbed belt |
Function | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.48 kg |
Opening Temperature | 105 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with cable, with Temperature Switch |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.6 kg |
Inner diameter | 13 mm |
Number of Ribs | 5 |
Outer diameter 1 | 139 mm |
Parameter | 6PK |
Outer diameter 2 | 144 mm |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.55 kg |
Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
Length | 882 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rated Power | 1.1 kW |
Weight | 3.3 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electronic |
Number of Connectors / Ports | 2 |
Function | Boost Pressure Control Valve |
Weight | 0.21 kg |
Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tilt Pump, driver cab |
Weight | 2.367 kg |
Suction side external thread size | M12 x 1,5 |
Pressure side external thread size | M12 x 1,5 |
Number of Connectors / Ports | 2 |
Operating Mode | Manual |
Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.524 kg |
Material | FPM (fluoride rubber), MVQ (silicone rubber) |
Inner diameter | 90 mm |
Colour | Red |
Function | Charge Air Hose |
Additional Information 2 | with clamps |
Extra Description | ProKit |
Type | Charge Air Hose |
Wall Thickness | 4 mm |
Hose Length | 160 mm |
Outer diameter | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (30183)
- 2x Febi Fastening Clamp, charge air hose (39027)
Important compatibility info
Fill quantity | 12 l |
Additional Information | with lids |
Weight | 3.710 kg |
Length | 471 mm |
Width | 264 mm |
Material | PP (Polypropylene) |
Thickness | 440 mm |
Function | Expansion Tank, coolant |
Extra Description | ProKit |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 175989 |
Weight | 1.003 kg |
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Placement on Vehicle | Exhaust Side |
Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bolts/screws |
Weight | 0.197 kg |
Material | Steel |
Type | Pipe, EGR valve |
Function | Pipe, EGR valve |
Extra Description | febi Plus |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.5 kg |
Placement on Vehicle | Front Axle |
Length | 785 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 52 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023