Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Fan, engine cooling |
| Number of Wings | 7 |
| Number of Connectors / Ports | 2 |
| Rated Power | 450 W |
| Thickness | 100 mm |
| Outer diameter | 420 mm |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.28
Important compatibility info
| Number of Teeth | 39 |
| Type | Gear, air compressor |
| Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.28
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Number of Ribs | 7 |
| Outer diameter | 74 mm |
| Track rollers material | Plastic |
| Material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.34
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Min. Length | 635 mm |
| External Teeth, Diff.Side | 26 |
| External Teeth, Wheel Side | 27 |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 89.5 mm |
| Wheel Sided Joint Diameter | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.35
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 4 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| for OE number | 103 200 37 01 |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.37
Important compatibility info
| Function | Thermostat, coolant |
| Outer diameter | 32 mm |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| for OE number | 98 086 472 80 |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.37
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 180544 |
| Cone Size | 22 mm |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Additional Information | with lock nut, with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.39
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm |
| Thickness | 330 mm. 500 mm |
| External Thread Size | M16 x 1,5, M24 x 1,5, M14 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.41
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.46
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 059 145 201 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.49
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 573 mm |
| Material | Steel |
| Outer diameter | 50 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.51
Important compatibility info
| Length | 52 mm |
| Width | 120 mm |
| Thickness | 86.5 mm |
| Voltage | 12 V |
| Function | Relay, glow plug system |
| Type | Relay, glow plug system |
| Hole Spacing | 99.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.54
Important compatibility info
| Outer diameter | 258 mm. 240 mm |
| Thickness | 220 mm. 600 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| External Thread Size | M12 x 1,75, M22 x 1,5 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.54
Important compatibility info
| Placement on Vehicle | Right, Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.59
Important compatibility info
| Outer diameter | 20 mm |
| Inner diameter | 16 mm |
| Number of Connectors / Ports | 2 |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.60
Important compatibility info
| Placement on Vehicle | both sides |
| Housing length | 318.5 mm |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 180 mm |
| Length | 546 mm |
| Function | Gas Spring, boot/cargo area |
| Housing Diameter | 19 mm |
| Eject Force | 600 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.60
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 177 W |
| Type | Interior Blower |
| Function | Interior Blower |
| for OE number | 002 830 24 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.61
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Length | 1320 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.63
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 671 mm |
| Min. Length | 418 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.63
Important compatibility info
| Paired article numbers | 180543 |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M12 x 1,25 |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.63
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 150 |
| Timing Chain Size | Z46-16 |
| Weight | 1.105 kg |
| Chain Type | Silent Chain, Closed chain |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48577)
- 1x Febi Tensioner, timing chain (40379)
- 1x Febi Guide, timing chain (36631)
- 1x Febi Guide, timing chain (36632)
- 1x Febi Gear/Sprocket, camshaft (104253)
- 1x Febi Shaft Seal, crankshaft (38238)
- 1x Febi Pulley Bolt (32025)
- 1x Febi Bolt, camshaft gear (46364)
£86.65
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 18 mm |
| External Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 14 mm |
| Additional Information | with rubber mounts, with crown nut and split pin |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 183592 |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.65
Important compatibility info
| Paired article numbers | 183593 |
| Cone Size | 14 mm |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Cone Size 2 | 18 mm |
| External Thread Size | M12 x 1,25 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.65
Important compatibility info
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.66
Important compatibility info
| Width | 41.2 mm |
| Outer diameter | 55 mm |
| Additional Information 2 | with lid |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.67
Important compatibility info
| Width | 153 mm |
| Outer diameter | 153 mm |
| Additional Information 2 | with screw |
| Inner diameter | 14 mm |
| Number of Ribs | 5 |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (103249)
- 1x Febi Bolt, crankshaft gear (39116)
£86.67
Important compatibility info
| Width | 16 mm |
| Number of Teeth | 103 |
| for OE number | 2 631 801 S1 |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Additional Information 2 | with tensioner element |
| Driven Units | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (178013)
- 1x Febi Tensioner, timing belt (178898)
- 1x Febi Pulley Bolt (185896)
- 1x Febi Bolt, tensioner pulley (193243)
- 1x Febi Screw (193427)
£86.67
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 3 |
| Rated Power | 277 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.69
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Max. Length | 397 mm |
| Min. Length | 256 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.70
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 257 mm. 130 mm |
| Thickness | 475 mm |
| External Thread Size | M22 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.72
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023