Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Min. Length | 973 mm |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Front Axle Right |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 81.5 mm |
| Paired article numbers | 184556 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.94
Important compatibility info
| for OE number | 26 11 8 488 056 |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Length | 164 mm |
| Inner diameter | 30 mm |
| Bearing Type | Ball Bearing |
| Hole Spacing | 144 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (186494)
- 1x Febi Bearing, propshaft centre bearing (05362)
£85.96
Important compatibility info
| Opening Pressure | 1.4 bar |
| Additional Information | with coolant level sensor |
| Material | Plastic |
| Additional Information 2 | with lid |
| Number of Connectors / Ports | 2 |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.96
Important compatibility info
| Placement on Vehicle | Upper |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 62 |
| Timing Chain Size | G67HR-2 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.96
Important compatibility info
| Number of Connectors / Ports | 5 |
| Housing Type | with housing |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 113 094 00 48 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.98
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 781 mm |
| Min. Length | 479 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 15 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.98
Important compatibility info
| Width | 31 mm |
| Outer diameter | 120 mm |
| Inner diameter | 11 mm |
| Number of Teeth | 40 |
| Additional Information 2 | with nut |
| Function | Gear/Sprocket, camshaft |
| Adjustable | Adjustable |
| Extra Description | febi Plus |
| Type | Gear/Sprocket, camshaft |
| Engine Management | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.07
Important compatibility info
| Additional Information | with rubber mounts |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 38285 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| not for OE number | 7H8 407 152 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38282)
- 1x Febi Mounting, control/trailing arm (28335)
- 1x Febi Mounting, control/trailing arm (26573)
£86.07
Important compatibility info
| Additional Information | with rubber mounts |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 38284 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| not for OE number | 7H8 407 151 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38283)
- 1x Febi Mounting, control/trailing arm (28335)
- 1x Febi Mounting, control/trailing arm (26573)
£86.07
Important compatibility info
| Length | 217 mm |
| Material | Rubber/Metal |
| Additional Information 2 | with rolling bearing |
| Inner diameter | 45 mm |
| Bearing Type | Rolling Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.08
Important compatibility info
| Additional Information | with gaskets/seals, with oil cooler, with oil filter |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.10
Important compatibility info
| Number of Connectors / Ports | 14 |
| Combi Switch Function | with klaxon, with indicator function, with wipe-wash function, with high beam function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.11
Important compatibility info
| Function | Water Pump, engine cooling |
| Number of Wings | 5 |
| Number of grooves | 8 |
| Seal Material | Paper |
| Water pump impeller material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.11
Important compatibility info
| Additional Information | with fuel sender unit |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.12
Important compatibility info
| Inner diameter | 15 mm |
| Function | Mounting, engine / Mounting, manual transmission |
| Width | 230 mm |
| Thickness | 130 mm |
| Type | Mounting, engine / Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear, both sides |
| Material | Cast Steel |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.13
Important compatibility info
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26293)
- 1x Febi Assembly Kit, propshaft joint (43515)
£86.13
Important compatibility info
| Width | 19 mm |
| Additional Information | with gaskets/seals, with fastening/mounting material |
| Number of Teeth | 99 |
| Surface | Coated |
| for OE number | 23356-42500 S5 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Width of castor bearing surface | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26114)
- 1x Febi Water Pump, engine cooling (173143)
£86.13
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 76 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G53HR, G53HP |
| Wet Boiling Point | 55 °C |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25229)
- 1x Febi Chain Tensioner, oil pump drive (25180)
£86.14
Important compatibility info
| Thickness | 12 mm |
| Inner diameter | 25 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 139 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.14
Important compatibility info
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.15
Important compatibility info
| Type | Tie Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 36 mm |
| Length | 1594 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with crown nut |
| External Thread Size | M18 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.17
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 28 |
| Additional Information 2 | with nut |
| Thread Size | M24 x 1,5 |
| Paired article numbers | 182962 |
| External Teeth, Diff.Side | 39 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 1117 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.18
Important compatibility info
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.19
Important compatibility info
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
| Type | Wiper Motor |
| for OE number | 8L0 955 711 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.22
Important compatibility info
| Number of Wings | 7 |
| Additional Information | with solenoid valve, with fastening/mounting material, with gasket/seal |
| Additional Information 2 | switchable water pump |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.22
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 96 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Timing Chain Size | G68HP, G68HR |
| Replaces | 30323 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25444)
- 1x Febi Guide, timing chain (30257)
- 1x Febi Guide, timing chain (30258)
- 1x Febi Tensioner, timing chain (25408)
£86.23
Important compatibility info
| Additional Information 2 | with brake fluid reservoir |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Material | Aluminium |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.24
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.24
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 66.2 mm |
| Brake Disc Thickness | 24 mm |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Minimum thickness | 22.4 mm |
| Rotor Style | Internally Vented |
| Bolt Hole Circle Diameter | 120 mm |
| Machining | High-carbon |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 75 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.27
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 548 mm |
| ABS Ring Diameter | 82 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 93.7 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.27
Important compatibility info
| Function | Fan, engine cooling |
| Number of Wings | 7 |
| Number of Connectors / Ports | 2 |
| Rated Power | 450 W |
| Thickness | 100 mm |
| Outer diameter | 420 mm |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.28
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Number of Ribs | 7 |
| Outer diameter | 74 mm |
| Track rollers material | Plastic |
| Material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.34
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Min. Length | 635 mm |
| External Teeth, Diff.Side | 26 |
| External Teeth, Wheel Side | 27 |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 89.5 mm |
| Wheel Sided Joint Diameter | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.35
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 4 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| for OE number | 103 200 37 01 |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.37
Important compatibility info
| Function | Thermostat, coolant |
| Outer diameter | 32 mm |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| for OE number | 98 086 472 80 |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.37
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 180544 |
| Cone Size | 22 mm |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Additional Information | with lock nut, with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.39
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.40
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm |
| Thickness | 330 mm. 500 mm |
| External Thread Size | M16 x 1,5, M24 x 1,5, M14 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.41
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.46
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 059 145 201 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.49
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 573 mm |
| Material | Steel |
| Outer diameter | 50 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.51
Important compatibility info
| Length | 52 mm |
| Width | 120 mm |
| Thickness | 86.5 mm |
| Voltage | 12 V |
| Function | Relay, glow plug system |
| Type | Relay, glow plug system |
| Hole Spacing | 99.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.54
Important compatibility info
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 430 mm |
| Min. Length | 287 mm |
| Pipe Diameter | 45 mm. 81 mm |
| Mounting points diameter | 14 mm. 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.54
Important compatibility info
| Additional Information 2 | with seal ring |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
| Length | 355 mm |
| Additional Information | with oil drain plug |
| Function | Oil sump |
| Spanner Size | 19 |
| Type | Oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.54
Important compatibility info
| Outer diameter | 258 mm. 240 mm |
| Thickness | 220 mm. 600 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| External Thread Size | M12 x 1,75, M22 x 1,5 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.54
Important compatibility info
| Placement on Vehicle | Right, Charge Air Cooler |
| Material | FKM (fluorocarbon rubber), Silicone |
| Inner diameter 1 | 45 mm |
| Inner diameter 2 | 43 mm |
| Type | Charge Air Hose |
| Wall Thickness | 5.5 mm |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.59
Important compatibility info
| Outer diameter | 20 mm |
| Inner diameter | 16 mm |
| Number of Connectors / Ports | 2 |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.60
Important compatibility info
| Placement on Vehicle | both sides |
| Housing length | 318.5 mm |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 180 mm |
| Length | 546 mm |
| Function | Gas Spring, boot/cargo area |
| Housing Diameter | 19 mm |
| Eject Force | 600 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.60
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 177 W |
| Type | Interior Blower |
| Function | Interior Blower |
| for OE number | 002 830 24 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.61
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 98 009 431 80, KT210393 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023