Important compatibility info
Weight | 11.85 kg |
Placement on Vehicle | Front Axle |
Function | Tie Rod |
Type | Tie Rod |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 LHT |
Pipe Diameter | 40 mm |
Cone Size | 30 mm |
Additional Information 2 | with crown nut |
Outer diameter | 40 mm |
Length | 1736 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.983 kg |
Paired article numbers | 15857 |
Outer diameter | 54 mm |
Type | Repair Kit, kingpin |
Function | Repair Kit, kingpin |
Additional Information | without kingpin |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Bush, steering knuckle (15860)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Washer (15887)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30198 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.224 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Push Rod |
Placement on Vehicle | Front Axle |
Cone Size | 28.6 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
Length | 733 mm. 783 mm |
Weight | 6.7 kg |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M27 x 1,5, M24 x 1,5 |
Function | Centre Rod Assembly |
Cone Size | 32 mm. 30 mm |
Rod/Strut | Push Rod |
Outer diameter | 38 mm |
Length | 885 mm |
Weight | 6.568 kg |
Extra Description | ProKit |
Additional Information | with nuts |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30199 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.224 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Aluminium |
Additional Information 2 | with ball joint |
Steering arm type | Triangular Control Arm (CV), Control Arm |
Paired article numbers | 179105 |
Weight | 4.850 kg |
Cone Size | 24 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Function | EGR Valve |
Type | EGR Valve |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.222 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Inner length 1 | 1573 mm |
Inner length 2 | 1252 mm |
Outer length 1 | 1880 mm |
Outer length 2 | 1604 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.429 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 406 mm |
Min. Length | 360 mm |
Mounting points diameter | 14 mm |
Operating Mode | Pneumatic |
Piston conrod diameter | 14 mm |
Placement on Vehicle | Rear |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Driver Position | for right-hand drive vehicles |
Inner length 2 | 1010 mm |
Inner length 1 | 965 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Weight | 1.332 kg |
Outer length 1 | 1225 mm |
Outer length 2 | 1300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.05 kg |
Function | Clutch, radiator fan |
Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 170964 |
Cone Size | 24 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Weight | 5.18 kg |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with dryer |
Weight | 2.165 kg |
Type | Condenser, air conditioning |
Function | Condenser, air conditioning |
Core Length | 320 mm |
Core Width | 735 mm |
Core Depth | 16 mm |
Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 000 260 50 98 |
Weight | 0.17 kg |
Type | Repair Kit, gear shift lever |
Function | Repair Kit, gear shift lever |
Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.97 kg |
Placement on Vehicle | Front Axle |
Length | 988 mm |
Width | 50 mm |
Thickness | 116 mm |
Rod/Strut | Guide Rod |
Thread Type | with right-hand thread |
Cone Size | 30 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 130 mm |
Width | 130 mm |
Thickness | 100.9 mm |
Weight | 4.136 kg |
Hole Spacing | 92 mm |
Function | Cylinder Liner, air compressor |
Type | Cylinder Liner, air compressor |
Additional Information | with retaining rings, with piston, with piston rings, with piston pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.13 kg |
Function | Fan, engine cooling |
Number of Wings | 7 |
Number of Connectors / Ports | 2 |
Rated Power | 450 W |
Thickness | 100 mm |
Outer diameter | 420 mm |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.6 kg |
Inner diameter | 13 mm |
Number of Ribs | 5 |
Outer diameter 1 | 139 mm |
Parameter | 6PK |
Outer diameter 2 | 144 mm |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.2 kg |
External Thread Size | M10 x 1 |
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 430 mm |
Min. Length | 287 mm |
Pipe Diameter | 45 mm. 81 mm |
Mounting points diameter | 14 mm. 20 mm |
Piston conrod diameter | 20 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.83 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30433 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.385 kg |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Operating Mode | Automatic |
Number of Ribs | 7 |
Outer diameter | 74 mm |
Track rollers material | Plastic |
Material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.422 kg |
for OE number | 03C 115 105 N SK |
Type | Oil Pump |
Function | Oil Pump |
Additional Information 2 | without gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Function | Sensor, engine oil level |
Type | Sensor, engine oil level |
Weight | 0.198 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.398 kg |
Number of Connectors / Ports | 14 |
Combi Switch Function | with klaxon, with high beam function, with indicator function, with wipe-wash function |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Vehicle Equipment | for vehicles with electric parking brake |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Left |
Additional Information | with electric motor |
Material | Cast Iron |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Weight | 3.4 kg |
Paired article numbers | 186528 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Brake Caliper Type | Brake Caliper (1 piston) |
Function | Brake Caliper |
Paired article numbers | 186527 |
Material | Cast Iron |
Brake caliper piston diameter | 44 mm |
Type | Brake Caliper |
Vehicle Equipment | for vehicles with electric parking brake |
Additional Information | with electric motor |
Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Housing Type | with housing |
Weight | 0.248 kg |
Resistor Type | Hot-film Sensor |
Function | Mass Air Flow Sensor |
Type | Mass Air Flow Sensor |
for OE number | 113 094 00 48 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Right |
Weight | 1.410 kg |
for OE number | 11 37 520 39R |
Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, air suspension |
Outer diameter | 197 mm. 228 mm |
Thickness | 180 mm. 350 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 6.9 kg |
External Thread Size | M16 x 1,5, M24 x 1,5, M14 x 2 |
Type | Bellow, air suspension |
Additional Information | with piston, with piston rod |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023