Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| External Thread Size | M16 x 1,5 |
| Paired article numbers | 179228 |
| Steering arm type | Control Arm |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.78
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 391 mm |
| Core Width | 713 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.79
Important compatibility info
| Function | Repair Kit, gear shift lever |
| Type | Repair Kit, gear shift lever |
| for OE number | 81.32605.6111 S1 |
| Fill Medium | Mineral Oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.82
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 5Q0 199 262 BQ |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.83
Important compatibility info
| Placement on Vehicle | non-steered leading axle |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5 |
| Outer diameter | 229 mm. 198 mm |
| Thickness | 249 mm. 565 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.86
Important compatibility info
| Replaces | 43701 |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.87
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.1 kW |
| Type | Starter |
| Function | Starter |
| for OE number | 02A 911 023 LX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.87
Important compatibility info
| Operating Mode | Electronic |
| Number of Connectors / Ports | 2 |
| Function | Boost Pressure Control Valve |
| Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.87
Important compatibility info
| Function | Interior Blower |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.87
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 142 |
| Timing Chain Size | G53HP, G53HR |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Type | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29868)
- 1x Febi Tensioner, timing chain (26751)
- 1x Febi Guide, timing chain (24287)
- 1x Febi Guide, timing chain (24286)
- 1x Febi Holder, timing chain tensioner (38015)
- 1x Febi Lock Cover, timing chain tensioner (mounting hole) (38327)
£86.87
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 101.5 mm |
| Wheel Sided Joint Diameter | 98 mm |
| External Teeth, Diff.Side | 26 |
| Min. Length | 860 mm |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 38 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Paired article numbers | 182112 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.88
Important compatibility info
| Material | Plastic |
| Additional Information 2 | with lid |
| Opening Pressure | 1.0 bar |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.88
Important compatibility info
| Function | Brake Master Cylinder |
| Additional Information | with gasket/seal |
| Type | Brake Master Cylinder |
| Internal Thread Size | M12 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.89
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 588 mm |
| Core Width | 361 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.89
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 881 mm |
| Inner length 2 | 962 mm |
| Outer length 1 | 1159 mm |
| Outer length 2 | 1255 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.90
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1034 mm |
| Inner length 2 | 890 mm |
| Outer length 1 | 1249 mm |
| Outer length 2 | 1157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.90
Important compatibility info
| Pipe Diameter | 40 mm |
| Cone Size | 30 mm |
| Adjustable | Adjustable on both sides |
| Placement on Vehicle | Front Axle |
| Length | 1575 mm |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
| Type | Tie Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 90 mm |
| Inner diameter | 45 mm |
| Outer diameter 2 | 87 mm |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Width | 39 mm |
| Outer diameter | 110 mm |
| Inner diameter | 55 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with wipe interval function, with wipe-wash function, with board computer function, with rear wipe-wash function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Diameter | 71 mm |
| Length | 358 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| for OE number | 936 130 12 15 SK5 |
| Type | Sealing Set, air compressor |
| Function | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 328 mm |
| Thickness | 49 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Outer diameter 1 | 72.4 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 30 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Outer diameter | 85 mm |
| Width | 48 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter 2 | 161.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 105 mm |
| Additional Information | with nuts |
| Number of Holes | 6 |
| Extra Description | ProKit |
| Additional Information 2 | with bolts/screws |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Assembly Kit, propshaft joint (43515)
£86.92
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Width | 25.4 mm |
| Number of Teeth | 137 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (09757)
- 1x Febi Timing Belt Kit (14626)
£86.92
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| Placement on Vehicle | Exhaust Side |
| for OE number | 1763.70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.92
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.92
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 610 mm |
| Core Width | 541 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.92
Important compatibility info
| Outer diameter | 193 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 5 |
| Inner diameter | 18 mm |
| Thickness | 37.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.94
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 429 mm |
| Housing Diameter | 19 mm |
| Eject Force | 520 N |
| Stroke | 136 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.94
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 787 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.95
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2 kW |
| Number of Teeth | 11 |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.98
Important compatibility info
| Housing Colour | black |
| Function | Ignition Coil |
| Number of Connectors / Ports | 2 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.99
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Operating Mode | Electric |
| Paired article numbers | 176514 |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.99
Important compatibility info
| Function | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Parameter | Typ 16 / 24 |
| Brake Type | Disc Brake |
| Additional Information | with fastening/mounting material |
| Type | Diaphragm Brake Cylinder |
| Stroke | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.00
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 55.4 mm |
| Brake Disc Thickness | 32.2 mm |
| Minimum thickness | 28.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.01
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 336 mm |
| Thickness | 52 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.01
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.01
Important compatibility info
| for OE number | 02M 911 023 X |
| Number of Teeth | 10 |
| Function | Starter |
| Voltage | 12 V |
| Rated Power | 1.1 kW |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.01
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Size | M27x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 30 |
| Number of mounting bores | 6 |
| Min. Length | 651 mm |
| Wheel Sided Joint Diameter | 94 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.02
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 5WA 199 262 BE |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.03
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 10 |
| Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.06
Important compatibility info
| Paired article numbers | 182626 |
| Material | Sheet Steel |
| Steering arm type | Control Arm, Four-Point Link (CV) |
| Placement on Vehicle | Front Axle Left, Lower, outer |
| Additional Information 2 | with ball joint |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.08
Important compatibility info
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 182625 |
| Placement on Vehicle | Front Axle Right, Lower, outer |
| Material | Sheet Steel |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.08
Important compatibility info
| Eject Force | 860 N |
| Length | 505 mm |
| Placement on Vehicle | both sides |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Housing Diameter | 22 mm |
| Housing length | 343.5 mm |
| Stroke | 131 mm |
| Mounting points diameter | 15 mm |
| Piston conrod diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.10
Important compatibility info
| Function | Centre Rod Assembly |
| Cone Size | 31.5 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Outer diameter | 50 mm |
| Length | 823 mm |
| Pipe Diameter | 50 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.11
Important compatibility info
| Function | Valve, crankcase ventilation |
| for OE number | 11 15 1 703 484 S1 |
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (36771)
- 1x Febi Mounting, crankcase ventilation valve (100134)
- 1x Febi Hose, crankcase ventilation (47198)
- 1x Febi Hose, crankcase ventilation (46304)
£87.11
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.12
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 635 mm |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 48 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.13
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023