Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 2.762 kg |
| Paired article numbers | 181408 |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Type | Electric Motor, window regulator |
| Weight | 0.6 kg |
| Additional Information 2 | with bolts/screws |
| Number of Connectors / Ports | 6 |
| Placement on Vehicle | Left |
| Function | Electric Motor, window regulator |
| Paired article numbers | 179337 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm. 180 mm |
| Thickness | 280 mm. 130 mm |
| Function | Bellow, air suspension |
| Weight | 10.0 kg |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Placement on Vehicle | Rear |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 329 mm |
| Min. Length | 253 mm |
| Pipe Diameter | 44 mm. 53 mm |
| External Thread Size | M10 x 1 |
| Weight | 2.5 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| External Thread Size | M22 x 1,5, M30 x 1,5 |
| Weight | 7.5 kg |
| Length | 893 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 2.762 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 181407 |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Additional Information | with holder |
| Filter type | with housing cover |
| Weight | 0.93 kg |
| Type | Cover, fuel filter |
| Function | Cover, fuel filter |
| External Thread Size | 1" - 14 UNF, M16 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 97 °C. 102 °C |
| Number of Connectors / Ports | 2 |
| Material | Plastic |
| Weight | 0.400 kg |
| Type | Thermostat, coolant |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Type | Electric Motor, window regulator |
| Weight | 0.6 kg |
| Function | Electric Motor, window regulator |
| Number of Connectors / Ports | 6 |
| Paired article numbers | 179338 |
| Placement on Vehicle | Right |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Function | Repair Kit, kingpin |
| Length | 225 mm |
| Outer diameter | 50 mm |
| Type | Repair Kit, kingpin |
| Weight | 4.680 kg |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (32432)
- 2x Febi Seal Ring, steering knuckle (28398)
- 1x Febi Bush, kingpin (28397)
- 2x Febi Seal Ring, steering knuckle (32434)
- 2x Febi Circlip (05370)
- 2x Febi Bush, steering knuckle (08524)
- 1x Febi Nut (32433)
- 1x Febi Spacer, kingpin (32436)
- 1x Febi Screw (32435)
- 1x Febi Grease Nipple (04187)
- 1x Febi Bush, steering knuckle (28396)
- 1x Febi Lock Ring, steering knuckle (28395)
- 1x Febi Lock Ring, steering knuckle (28394)
£88.89
Important compatibility info
| Weight | 11.85 kg |
| Placement on Vehicle | Front Axle |
| Function | Tie Rod |
| Type | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Pipe Diameter | 40 mm |
| Cone Size | 30 mm |
| Additional Information 2 | with crown nut |
| Outer diameter | 40 mm |
| Length | 1736 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16x1,5 |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 7.329 kg |
| Number of mounting bores | 6 |
| Min. Length | 806 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 2.47 kg |
| Type | Water Pump, engine cooling |
| for OE number | 104 200 33 01 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| for OE number | 7H0 422 154 F |
| Weight | 1.422 kg |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Inner diameter | 16 mm |
| Operating Mode | Hydraulic |
| Number of mounting bores | 3 |
| Mounting points diameter | 8 mm |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 120 bar |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Weight | 1.93 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 64 mm |
| Outer diameter | 139 mm |
| Inner diameter | 37 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 120 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.5 kW |
| Weight | 3.13 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Weight | 8.154 kg |
| Placement on Vehicle | Front Axle |
| Length | 855 mm |
| Rod/Strut | Push Rod |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| External Thread Size | M10 |
| Wet Sump Material | Sheet Steel |
| Length | 550 mm |
| Height | 285 mm |
| Width | 205 mm |
| Colour | Black |
| Type | Oil sump |
| Function | Oil sump |
| Weight | 3.50 kg |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| Spanner Size | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Weight | 7.500 kg |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Thread Type | with right-hand thread |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Length | 744 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Colour | Black |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.89
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
| Outer diameter | 228.6 mm |
| Inspection Tag | ECE R90 Approved |
| Weight | 3.41 kg |
| Mounting Type | Pre-assembled |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.90
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023