Important compatibility info
Paired article numbers | 100157 |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Placement on Vehicle | Left, Upper |
Weight | 2.534 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 2 515 232 |
Placement on Vehicle | Rear |
Weight | 1.615 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.01 kg |
Placement on Vehicle | Rear |
Number of Connectors / Ports | 3 |
Function | Wiper Motor |
Voltage | 12 V |
Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Fuel Filter |
Housing material | Plastic |
Function | Fuel Filter |
Weight | 0.69 kg |
Additional Information | with holder |
Width | 140 mm |
Height | 229 mm |
Length | 140 mm |
Filter type | In-Line Filter, with water drain screw, with connection for water sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Right |
Weight | 1.968 kg |
Type | Mounting, engine |
Function | Mounting, engine |
Paired article numbers | 109372 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Type | Drum Brake |
Piston Rod Length | 180 mm |
Piston Rod Thread | M16 x 1,5 |
Function | Spring-loaded Cylinder |
Weight | 8.7 kg |
Distance of fastening bolts | 120 mm |
Stroke | 64 mm |
Internal Thread Size | M16 x 1,5 |
Type | Spring-loaded Cylinder |
Parameter | Typ 16 / 24 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Number of Connectors / Ports | 2. 5 |
Function | Control Unit, heating/ventilation |
Extra Description | febi Plus |
Type | Control Unit, heating/ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.148 kg |
External Teeth, Diff.Side | 22 |
Transmission-side joint diameter | 74.2 mm |
External Teeth, Wheel Side | 25 |
Thread Size | M24x1,5 |
Wheel Sided Joint Diameter | 79 mm |
Min. Length | 605 mm |
Type | Drive Shaft |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 2.648 kg |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control Element, parking brake caliper |
Type | Control Element, parking brake caliper |
Weight | 0.570 kg |
Paired article numbers | 194495 |
Extra Description | febi Plus |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 194496 |
Type | Control Element, parking brake caliper |
Extra Description | febi Plus |
Weight | 0.570 kg |
Function | Control Element, parking brake caliper |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.0 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 200 mm |
Additional Information | with piston |
Function | Bellow, air suspension |
Thickness | 300 mm. 121 mm |
External Thread Size | M12 x 1,5, M16 x 1,5 |
Type | Bellow, air suspension |
Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Additional Information | with electric motor |
Material | Cast Iron |
Vehicle Equipment | for vehicles with electric parking brake |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 183211 |
Weight | 3.0 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.924 kg |
Extra Description | Basic Short Kit |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 150 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
for OE number | 03F 109 158 G S1 |
Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45052)
- 1x Febi Tensioner, timing chain (46274)
- 1x Febi Guide, timing chain (102138)
- 1x Febi Guide, timing chain (102139)
Important compatibility info
Weight | 0.17 kg |
Number of Connectors / Ports | 2 |
Function | Pressure Converter, exhaust control |
Operating Mode | Electric-pneumatic |
Extra Description | febi Plus |
Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 61 mm |
Outer diameter | 138 mm |
Inner diameter | 25 mm |
Parameter | 5PK + 6PK |
Number of Ribs | 4. 9 |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Weight | 1.272 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Diaphragm Brake Cylinder |
Stroke | 57 mm |
Parameter | Typ 16 / 24 |
Weight | 7.1 kg |
Brake Type | Disc Brake |
Additional Information | with fastening/mounting material |
Function | Diaphragm Brake Cylinder |
Piston Rod Length | 15 mm |
Distance of fastening bolts | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 105 mm |
Weight | 0.89 kg |
Placement on Vehicle | Front |
Outer diameter | 150 mm |
Function | Joint, propshaft |
Additional Information 2 | with bolts/screws |
Number of Holes | 6 |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (102292)
- 6x Febi Screw (43412)
Important compatibility info
Outer diameter | 20 mm |
Type | Hydraulic Pump, steering |
Operating pressure to | 11.5 bar |
Function | Hydraulic Pump, steering |
Mounting points diameter | 9 mm |
Number of mounting bores | 4 |
Internal Thread Size | M16 x 1,5 |
Operating Mode | Hydraulic |
Rotation Direction | Clockwise rotation |
Number of Connectors / Ports | 2 |
Weight | 2.180 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 41073 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.36 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Material | Plastic |
Colour | Black |
Weight | 1.039 kg |
Type | Fitting, intake manifold |
Function | Fitting, intake manifold |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Lock System | with double sealing |
Number of Connectors / Ports | 7 |
Paired article numbers | 177560 |
Weight | 0.634 kg |
Extra Description | febi Plus |
Function | Door Lock |
Type | Door Lock |
Additional Information | with adjuster |
Placement on Vehicle | Right Rear |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 25 mm |
Number of Teeth | 153 |
Function | Timing Belt Kit |
Belts | with rounded tooth profile |
Type | Timing Belt Kit |
Weight | 0.925 kg |
Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (28105)
- 1x Febi Tensioner Pulley, timing belt (28106)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (19189)
Important compatibility info
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Weight | 10.869 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 324 mm |
Minimum thickness | 25.4 mm |
Bolt Hole Circle Diameter | 108 mm |
Thickness | 47 mm |
Brake Disc Thickness | 28 mm |
Surface | Coated |
Function | Brake Disc |
Number of mounting bores | 2 |
Centering Diameter | 61 mm |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 7.84 kg |
Rotor Style | slotted/perforated, internally vented |
Minimum thickness | 20.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Placement on Vehicle | Rear Axle |
Outer diameter | 324 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Thickness | 67.2 mm |
Brake Disc Thickness | 22 mm |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 25 |
Weight | 7.854 kg |
External Teeth, Diff.Side | 24 |
Min. Length | 935 mm |
Wheel Sided Joint Diameter | 84 mm |
Transmission-side joint diameter | 82 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Outer diameter | 150 mm |
Number of Holes | 6 |
Bolt Hole Circle Diameter | 105 mm |
Function | Joint, propshaft |
Weight | 0.8 kg |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 320 mm |
Thickness | 49 mm |
Brake Disc Thickness | 25 mm |
Minimum thickness | 23 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 64 mm |
Surface | Coated |
Weight | 8.9 kg |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Weight | 9.9 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 320 mm |
Thickness | 49.3 mm |
Brake Disc Thickness | 26 mm |
Minimum thickness | 23 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 62 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 105676 |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Function | Mounting, automatic transmission |
Weight | 2.308 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023