Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 6.5 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Rolling piston material | Steel |
| Outer diameter | 155 mm. 190 mm |
| Thickness | 280 mm. 155 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Port / Connector type | Voss Stecksystem 232 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.46
Important compatibility info
| Weight | 10.670 kg |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 573 mm |
| Material | Steel |
| Outer diameter | 50 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.47
Important compatibility info
| Parameter | 6 PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 153 mm |
| Inner diameter | 14 mm |
| Number of Ribs | 5 |
| Extra Description | ProKit |
| Additional Information 2 | with screw, with seal ring |
| Type | Belt Pulley, crankshaft |
| Weight | 1.580 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (103826)
- 1x Febi Bolt, crankshaft gear (39116)
- 1x Febi Shaft Seal, oil pump (31144)
£87.48
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 1.541 kg |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 447 241 02 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.49
Important compatibility info
| Additional Information | with solenoid valve |
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 6 |
| Weight | 0.38 kg |
| Cable Length | 490 mm |
| Type | Water Separator, fuel system |
| Function | Water Separator, fuel system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.55
Important compatibility info
| Weight | 11.08 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Thickness | 52.1 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.57
Important compatibility info
| Weight | 1.660 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| for OE number | 0361.N4 |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.59
Important compatibility info
| Weight | 1.738 kg |
| Additional Information 2 | with spacer plate |
| Length | 140 mm |
| Width | 120 mm |
| Thickness | 80 mm |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.59
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.921 kg |
| for OE number | 1K0 199 262 CB |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.59
Important compatibility info
| Function | Cylinder Head Gasket Set, air compressor |
| Type | Cylinder Head Gasket Set, air compressor |
| Weight | 0.260 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.62
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 8.8 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 356 mm |
| Thickness | 36.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.62
Important compatibility info
| for OE number | 4M0 199 371 FE |
| Weight | 2.030 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.63
Important compatibility info
| Additional Information 2 | non-switchable water pump |
| Weight | 1.529 kg |
| Additional Information | with gasket/seal |
| Material | Grey Cast Iron |
| Number of grooves | 5 |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.66
Important compatibility info
| Operating Mode | Mechanical |
| Outer diameter | 75 mm |
| Housing material | Plastic |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 0.650 kg |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.71
Important compatibility info
| for OE number | 4M0 199 372 GP |
| Weight | 2.000 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.72
Important compatibility info
| Weight | 3.560 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 31 mm. 58 mm |
| Bolt Hole Circle Diameter | 64 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Width | 137 mm |
| Outer diameter | 137 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.73
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 106 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Weight | 0.78 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.78
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Surface | Coated |
| Weight | 14.7 kg |
| Outer diameter | 312 mm |
| Thickness | 116 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Centering Diameter | 118 mm |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.79
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 183208 |
| Weight | 2.9 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.79
Important compatibility info
| Weight | 1.585 kg |
| Inner diameter | 45 mm |
| Function | Suspension, propshaft |
| Replaces | 07189 |
| Type | Suspension, propshaft |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.80
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023