Proud to be a UK-based company
Contact us
Important compatibility info
| Outer length 1 | 1240 mm |
| Inner length 1 | 890 mm |
| Inner length 2 | 905 mm |
| Weight | 0.890 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 2 | 1120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Mounting points diameter | 8 mm |
| for OE number | 82 01 183 788 |
| Internal Thread Size | M16 x 1,5 |
| Number of mounting bores | 3 |
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Weight | 1.604 kg |
| Type | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Inner diameter | 11 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Outer diameter | 168 mm |
| Additional Information 2 | with bolts/screws |
| Inner diameter | 94 mm |
| Weight | 1.57 kg |
| Type | Belt Pulley, crankshaft |
| Parameter | 4PK + 6PK |
| Width | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (49589)
£91.86
Important compatibility info
| Weight | 3.885 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60 mm |
| Outer diameter | 81 mm |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.8 kW |
| Weight | 4.3 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Weight | 6.8 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 40426 |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Weight | 2.3 kg |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Weight | 6.0 kg |
| Outer diameter | 228 mm. 190 mm |
| Thickness | 260 mm |
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 36252 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 7.045 kg |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Material | Cast Aluminium |
| Number of grooves | 7 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Weight | 2.609 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 2 |
| Length | 152 mm |
| Material | Rubber/Metal |
| Weight | 0.800 kg |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| External Thread Size | M8 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.91
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Internally Vented |
| Weight | 10.110 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 52.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 96.3 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.91
Important compatibility info
| Weight | 10.7 kg |
| Placement on Vehicle | Rear Axle |
| Length | 580 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.91
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 1108 mm |
| Additional Information 2 | with nut |
| Thread Size | M28x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 11.125 kg |
| External Teeth, Diff.Side | 37 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.92
Important compatibility info
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 20.7 mm |
| Placement on Vehicle | Rear Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Weight | 2.1 kg |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171122)
- 2x Febi Link/Coupling Rod, stabiliser bar (102444)
£91.94
Important compatibility info
| Weight | 3.34 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 232 mm |
| Outer diameter | 40 mm. 60 mm |
| Function | Repair Kit, kingpin |
| External Thread Size | M40 x 1,5 |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (29485)
- 1x Febi Bush, kingpin (29495)
- 1x Febi Repair Kit, kingpin (29768)
- 1x Febi Split Pin (29496)
- 1x Febi Castle Nut (29497)
£91.97
Important compatibility info
| Weight | 0.142 kg |
| Material | Plastic |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.97
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 23002 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 2.980 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (22998)
- 1x Febi Mounting, control/trailing arm (11662)
£91.99
Important compatibility info
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 53126888 |
| Weight | 2.570 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.99
Important compatibility info
| Placement on Vehicle | Front Axle, Left |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Weight | 3.17 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 194333 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.00
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 172 mm |
| Outer diameter | 35 mm. 36 mm |
| Weight | 1.4 kg |
| Function | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15215)
- 1x Febi Bush, kingpin (15213)
- 1x Febi Bush, steering knuckle (15214)
- 1x Febi Bush, steering knuckle (01250)
- 2x Febi Seal Ring, steering knuckle (01251)
- 2x Febi Seal Ring, steering knuckle (10609)
- 2x Febi Lock Ring, steering knuckle (10610)
- 2x Febi Sealing/Protective Cap (08522)
- 2x Febi Circlip (04561)
- 2x Febi Grease Nipple (01094)
- 1x Febi Spacer, kingpin (15145)
- 1x Febi Spacer, kingpin (15146)
- 1x Febi Spacer, kingpin (15147)
- 1x Febi Spacer, kingpin (15148)
- 1x Febi Spacer, kingpin (15149)
- 1x Febi Spacer, kingpin (15217)
£92.05
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.07 kg |
| Placement on Vehicle | after soot particulate filter |
| for OE number | 03L 906 088 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.08
Important compatibility info
| Weight | 0.072 kg |
| Placement on Vehicle | after soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 070 906 088 AF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.09
Important compatibility info
| Weight | 1.800 kg |
| Length | 206 mm |
| Outer diameter | 35 mm |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (102052)
- 1x Febi Grease Nipple (102037)
- 2x Febi Circlip, kingpin (02668)
- 1x Febi Lock Ring, steering knuckle (102050)
- 2x Febi Bush, steering knuckle (01250)
- 1x Febi Bush, kingpin (102051)
- 2x Febi Seal Ring, steering knuckle (101025)
- 1x Febi Lock Ring, steering knuckle (102049)
- 1x Febi Bush, steering knuckle (103407)
£92.11
Important compatibility info
| Length | 96 mm |
| Material | Plastic |
| Outer diameter | 80 mm |
| Inner diameter | 73 mm |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Weight | 0.18 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.15
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.040 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.20
Important compatibility info
| Additional Information 2 | with bearing |
| Weight | 2.42 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 41364 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
£92.22
Important compatibility info
| Housing Type | with housing |
| Weight | 0.221 kg |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.24
Important compatibility info
| Additional Information 2 | with crown nut |
| Function | Centre Rod Assembly |
| Weight | 7.7 kg |
| Length | 909 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 42 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.25
Important compatibility info
| Filter type | with filter heating, with water separator |
| Function | Housing, fuel filter |
| Weight | 1.918 kg |
| Number of Connectors / Ports | 2 |
| Type | Housing, fuel filter |
| Internal Thread Size | M16 x 1,5 |
| Additional Information 2 | with filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.25
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023