Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.03 kg |
| Placement on Vehicle | Rear Axle |
| Width | 39 mm |
| Outer diameter | 203 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 20499474 |
| Weight | 4.619 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Wheel Sided Joint Diameter | 91.2 mm |
| Type | Drive Shaft |
| Additional Information | with Split Pin |
| Weight | 9.510 kg |
| Function | Drive Shaft |
| Transmission-side joint diameter | 88.8 mm |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 921 mm |
| External Teeth, Diff.Side | 37 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 226 mm |
| Outer diameter 1 | 40 mm |
| Outer diameter 2 | 60 mm |
| Function | Repair Kit, kingpin |
| Weight | 4.48 kg |
| External Thread Size | M40 x 1,5 |
| Additional Information | with Thrust Bearing |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, kingpin (29495)
- 1x Febi Castle Nut (29497)
- 1x Febi Kingpin (29486)
- 1x Febi Repair Kit, kingpin (29768)
- 1x Febi Bush, steering knuckle (35642)
£90.87
Important compatibility info
| Parameter | 6PK |
| Width | 36 mm |
| Material | Steel |
| Outer diameter | 169 mm |
| Inner diameter | 31 mm |
| Number of Ribs | 5 |
| Weight | 1.84 kg |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Material | Aluminium |
| Weight | 2.35 kg |
| Paired article numbers | 107293 |
| Placement on Vehicle | Upper, Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| External Thread Size | M14 x 1,5 |
| Cone Size | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (107292)
- 1x Febi Nut (21557)
- 2x Febi Washer (21558)
- 1x Febi Bolt, control arm (40158)
£90.87
Important compatibility info
| Number of Teeth | 26 |
| Weight | 0.749 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Fan Wheel, engine cooling |
| Weight | 5.10 kg |
| Outer diameter | 700 mm |
| Thickness | 90 mm |
| Bolt Hole Circle Diameter | 155 mm |
| Number of Wings | 8 |
| for OE number | 906 205 04 06 |
| Type | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Cone Size | 30 mm |
| Weight | 6.277 kg |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Length | 667 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on both sides |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Placement on Vehicle | Front Axle |
| Length | 837 mm |
| Rod/Strut | Push Rod |
| Weight | 6.4 kg |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Extra Description | Basic Short Kit |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Weight | 0.755 kg |
| for OE number | 03C 109 158 H S5 |
| Chain Type | Silent Chain, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (105796)
- 1x Febi Tensioner, timing chain (170392)
- 1x Febi Guide, timing chain (173674)
- 1x Febi Guide, timing chain (174912)
£90.87
Important compatibility info
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Placement on Vehicle | Intake Side |
| Weight | 0.874 kg |
| Number of Teeth | 42 |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Hydraulic Pump, steering |
| Height | 120 mm |
| Width | 126 mm |
| Length | 128 mm |
| Weight | 2.28 kg |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 52 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Type | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Weight | 9.6 kg |
| Additional Information | with gaskets/seals |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 7.900 kg |
| Rod/Strut | Guide Rod |
| Length | 974 mm |
| Material | Steel |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 40 mm |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 2.385 kg |
| Piston Diameter | 22 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Inner Brake Drum Diameter | 200 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
| Outer diameter | 202.52 mm |
| Thickness/Strength 1 | 6.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 2.851 kg |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Rod/Strut | Coupling Rod |
| Bore Diameter | 22 mm |
| Weight | 5.185 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Diameter | 50 mm |
| Length | 400 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Grey Cast Iron |
| Number of grooves | 4 |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
| Weight | 1.489 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Additional Information 2 | with crown nut |
| Weight | 5.8 kg |
| Placement on Vehicle | Front Axle |
| Length | 661 mm |
| Pipe Diameter | 36 mm |
| Function | Tie Rod |
| Type | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Length | 900 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size | 28.6 mm |
| Weight | 7.400 kg |
| Additional Information 2 | with crown nut |
| Thread Size | M20 x 1,5 |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 38843 |
| Steering arm type | Control Arm |
| Outer diameter | 22 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Weight | 7.11 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joints |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Centre Rod Assembly |
| Rod/Strut | Guide Rod |
| Thread Type | with right-hand thread |
| Weight | 7.485 kg |
| Placement on Vehicle | Front Axle |
| Length | 946 mm |
| Width | 42 mm |
| Outer diameter | 42 mm |
| Cone Size | 26 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Thickness | 83 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Fill quantity | 11.5 l |
| Weight | 2.615 kg |
| Function | Expansion Tank, coolant |
| Thickness | 147 mm |
| Number of Connectors / Ports | 2 |
| Material | PP (Polypropylene) |
| Width | 174 mm |
| Length | 477 mm |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Additional Information | with lids, with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 38844 |
| Steering arm type | Control Arm |
| Outer diameter | 22 mm |
| Placement on Vehicle | Front Axle Left, Lower |
| Weight | 7.11 kg |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 90 mm |
| Inner diameter | 45 mm |
| Outer diameter 2 | 87 mm |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring |
| Bearing Type | Angular Ball Bearing |
| Weight | 1.4 kg |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 614 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 89.1 mm |
| Transmission-side joint diameter | 81.6 mm |
| Placement on Vehicle | Front Axle Left |
| Weight | 6.596 kg |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
| Weight | 0.691 kg |
| for OE number | 14710-00Q0G |
| Type | EGR Valve |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.91
Important compatibility info
| Width | 135 mm |
| Height | 205 mm |
| Function | Fuel filter |
| Housing material | Plastic |
| Additional Information | with holder |
| Length | 150 mm |
| Weight | 0.645 kg |
| Filter type | In-Line Filter, with water drain screw, with connection for water sensor |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.92
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 2.000 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.95
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023