Important compatibility info
Voltage | 12 V |
Driver Position | for right-hand drive vehicles |
Number of Connectors / Ports | 2 |
Rated Power | 384 W |
Weight | 1.7 kg |
Type | Interior Blower |
Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Placement on Vehicle | Left |
Weight | 2.099 kg |
Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mass Air Flow Sensor |
Weight | 0.171 kg |
Resistor Type | Hot-wire Sensor |
Number of Connectors / Ports | 5 |
Type | Mass Air Flow Sensor |
for OE number | 271 094 02 48 |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.109 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Function | Actuator, central locking system |
Extra Description | febi Plus |
Type | Actuator, central locking system |
Placement on Vehicle | Front, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.256 kg |
Additional Information | with Split Pin |
External Teeth, Wheel Side | 28 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 101.1 mm |
Additional Information 2 | with nut |
Thread Size | M24x2,0 |
Paired article numbers | 181099 |
Wheel Sided Joint Diameter | 102 mm |
External Teeth, Diff.Side | 41 |
Min. Length | 755 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.66 kg |
Spanner Size | 32 |
Parameter | VL100R |
Type | Clutch, radiator fan |
Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.130 kg |
Placement on Vehicle | Lower Front Axle, Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 21740 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21735)
Important compatibility info
Function | Wiper Motor |
Placement on Vehicle | Rear |
Voltage | 12 V |
Weight | 0.899 kg |
Type | Wiper Motor |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.025 kg |
for OE number | 11 21 000 62R |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Seal Kit, multi-valve |
Additional Information | with gaskets/seals |
Weight | 1.110 kg |
Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 1340 mm |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 |
External Thread Size | M20 x 1,5 |
Cone Size | 26 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 40 mm |
Weight | 13.6 kg |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 30 |
Weight | 8.912 kg |
External Teeth, Diff.Side | 29 |
Min. Length | 773 mm |
Wheel Sided Joint Diameter | 63 mm |
Transmission-side joint diameter | 95 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material, without electric motor |
Placement on Vehicle | Left Rear |
Operating Mode | Electric |
Paired article numbers | 179231 |
Weight | 0.86 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 893 mm |
Additional Information 2 | with crown nut |
Internal Thread Size | M24 x 1,5 |
Cone Size | 30 mm |
Adjustable | Adjustable on one side |
Type | Centre Rod Assembly |
Extra Description | ProKit |
Function | Centre Rod Assembly |
Diameter 1 | 56 mm |
Rod/Strut | Push Rod |
Weight | 13.250 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M22x1,5 |
External Teeth, Diff.Side | 34 |
Transmission-side joint diameter | 79 mm |
Weight | 5.554 kg |
Min. Length | 591 mm |
External Teeth, Wheel Side | 26 |
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 82.1 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.296 kg |
Voltage | 24 V |
Number of Connectors / Ports | 5 |
Additional Information 2 | with bolts/screws, with nut, with cable |
Type | Wiper Motor |
Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Plastic |
Colour | Black |
Weight | 1.9 kg |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.650 kg |
Function | Water Pump, engine cooling |
Number of Wings | 5 |
Number of grooves | 8 |
Seal Material | Paper |
Water pump impeller material | Grey Cast Iron |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fulfils ECE norm | E1 R55 |
Diameter | 2 Inch |
Function | Fifth Wheel Kingpin |
Weight | 6.572 kg |
Type | Fifth Wheel Kingpin |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fifth Wheel Kingpin (03437)
- 8x Febi Screw (03436)
Important compatibility info
Wheel Sided Joint Diameter | 89.2 mm |
Transmission-side joint diameter | 81.6 mm |
Min. Length | 956 mm |
Additional Information 2 | with nut |
External Teeth, Wheel Side | 25 |
Placement on Vehicle | Front Axle Right |
External Teeth, Diff.Side | 27 |
Weight | 9.598 kg |
Type | Drive Shaft |
Thread Size | M20x1,5 |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023