Proud to be a UK-based company
Contact us
Important compatibility info
| Housing Type | with housing |
| Weight | 0.221 kg |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.24
Important compatibility info
| Filter type | with filter heating, with water separator |
| Function | Housing, fuel filter |
| Weight | 1.918 kg |
| Number of Connectors / Ports | 2 |
| Type | Housing, fuel filter |
| Internal Thread Size | M16 x 1,5 |
| Additional Information 2 | with filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.25
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 28 mm |
| Inner diameter | 50 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Extra Description | ProKit |
| for OE number | 26 11 1 229 360 S2 |
| Additional Information 2 | with bolts/screws |
| Type | Joint, propshaft |
| Weight | 0.92 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (09203)
- 1x Febi Assembly Kit, propshaft joint (43432)
£92.25
Important compatibility info
| Weight | 3.472 kg |
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (35395)
- 1x Febi Fuel filter (171330)
- 1x Febi Air Filter (40548)
- 1x Febi Filter, cabin air (23581)
- 1x Febi Air Filter, compressor intake (38976)
£92.31
Important compatibility info
| Weight | 1.847 kg |
| Length | 300 mm |
| Width | 160 mm |
| Thickness | 195 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.31
Important compatibility info
| Placement on Vehicle | Exhaust Side, Intake Side |
| Operating Mode | Mechanical |
| Weight | 0.424 kg |
| Type | Tappet |
| Function | Tappet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.33
Important compatibility info
| Weight | 2.010 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.35
Important compatibility info
| Weight | 0.177 kg |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| for OE number | 23796-AU00D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.40
Important compatibility info
| Weight | 0.983 kg |
| Paired article numbers | 15857 |
| Outer diameter | 54 mm |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Additional Information | without kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Bush, steering knuckle (15860)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Washer (15887)
£92.41
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 293 mm |
| Thickness | 58 mm |
| Brake Disc Thickness | 40 mm |
| Inner diameter | 160 mm |
| Minimum thickness | 37 mm |
| Bolt Hole Circle Diameter | 136 mm |
| Centering Diameter | 110 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 12 -Hole |
| Type | Brake Disc Rotor |
| Weight | 12.0 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.42
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 37349 |
| Bolt Head Diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Weight | 5.31 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holders |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.48
Important compatibility info
| Weight | 4.16 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 618 mm |
| Min. Length | 385 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.52
Important compatibility info
| Weight | 0.019 kg |
| Number of Connectors / Ports | 4 |
| for OE number | 89421-47010 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.58
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 64.4 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Weight | 8.62 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | perforated/vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.60
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| Weight | 9.424 kg |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 944 mm |
| Wheel Sided Joint Diameter | 92.2 mm |
| Transmission-side joint diameter | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.61
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.404 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.63
Important compatibility info
| Weight | 8.85 kg |
| Placement on Vehicle | Rear Axle |
| Width | 53.6 mm |
| Outer diameter | 290 mm |
| Thickness | 84.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 50.2 mm |
| Max.skimmed drum measure | 231.5 mm |
| Inner Brake Drum Diameter | 230 mm |
| Function | Brake Drum |
| Rim Hole Number | 4 -Hole |
| Type | Brake Drum |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.64
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 22 11 8 483 785 |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 1.289 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.64
Important compatibility info
| Thickness | 47 mm |
| Brake Disc Thickness | 28 mm |
| Centering Diameter | 64.1 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 26 mm |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Weight | 9.0 kg |
| Outer diameter | 320 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.69
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 56 mm |
| Surface | Oiled |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Thickness | 69.2 mm |
| Brake Disc Thickness | 9 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 248 mm |
| Rim Hole Number | 4 -Hole |
| Weight | 5.56 kg |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring, with grease cap |
| Hub external diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.70
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023