Proud to be a UK-based company
Contact us
Important compatibility info
| Height | 100 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Function | Throttle body |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.63
Important compatibility info
| Width | 56 mm |
| Outer diameter | 170 mm |
| Inner diameter | 36 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.63
Important compatibility info
| Number of Wings | 12 |
| Housing material | Grey Cast Iron |
| Seal Material | Rubber |
| Water pump impeller material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.64
Important compatibility info
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5, M14 x 2 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 197 mm. 229 mm |
| Thickness | 588 mm. 187 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.65
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40313 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (29254)
- 1x Febi Screw (36678)
- 1x Febi Nut (34653)
- 1x Febi Nut (38356)
£99.68
Important compatibility info
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.70
Important compatibility info
| Rim Hole Number | 10 -Hole |
| Outer diameter | 376 mm |
| Thickness | 57.5 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 39 mm |
| Bolt Hole Circle Diameter | 190 mm |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.72
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.72
Important compatibility info
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt Set |
| Tensile Cord Material | Aramid |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt Set |
| Length | 1073 mm |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184927)
- 1x Febi Belt Tensioner, v-ribbed belt (186616)
- 1x Febi Belt Tensioner, v-ribbed belt (177943)
£99.72
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 966 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.72
Important compatibility info
| Number of mounting bores | 3 |
| Type | Central Slave Cylinder, clutch |
| for OE number | 1 672 781 |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Pipe Diameter | 50 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Length | 1624 mm |
| Cone Size | 30 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 612 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Max. Length | 338 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 79 mm. 42 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Min. Length | 297 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 25 mm |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 330 mm |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Length | 1920 mm |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt Set |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Units / Pulleys | incl. deflection pulley |
| Number of Deflection Rollers | 2 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Deflection/Guide Pulley, v-ribbed belt (30389)
- 1x Febi Belt Tensioner, v-ribbed belt (27135)
- 1x Febi V-Ribbed Belt (34136)
£99.73
Important compatibility info
| Function | Throttle body |
| Type | Throttle body |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 888 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Material | NBR (nitrile butadiene rubber), Steel, EPDM (ethylene propylene diene Monomer (M-class) rubber), PTFE (polytetrafluoroethylene) |
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 575 mm |
| Steering arm type | Trailing Arm, Triangular Control Arm (CV) |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023