Important compatibility info
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
for OE number | 61 67 7 283 213 |
Weight | 0.13 kg |
Placement on Vehicle | both sides |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Placement on Vehicle | Upper |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Holder, engine mounting system |
Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tensioner, timing chain |
Operating Mode | Hydraulic |
Weight | 0.144 kg |
Length | 80 mm |
Width | 27 mm |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 58 mm |
Function | Wheel Bearing Kit |
Additional Information 2 | with retaining ring |
Inner diameter | 28 mm |
Weight | 0.544 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Width | 44 mm |
Additional Information | with axle nut |
Replaces | 30574 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.235 kg |
Number of Connectors / Ports | 4 |
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
for OE number | 03C 906 051 F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1162 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.175 kg |
Function | V-Ribbed Belt |
Number of Ribs | 10 |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Width | 32 mm |
Outer diameter | 65.5 mm |
Inner diameter | 8 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, tilt cylinder |
Type | Repair Kit, tilt cylinder |
Weight | 0.41 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.681 kg |
Type | Throttle body |
Function | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.690 kg |
Thickness | 50 mm |
Inner diameter | 13 mm |
Number of Ribs | 8 |
Outer diameter 1 | 145 mm |
Outer diameter 2 | 167 mm |
Function | Belt Pulley, crankshaft |
Parameter | 6PK + 4PK |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.95 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 90 mm |
Material | Rubber/Metal |
Outer diameter | 48 mm |
Inner diameter | 14.4 mm |
Type | Bushing, leaf spring |
Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 95 mm |
Additional Information | with lock nut |
Weight | 0.43 kg |
Type | Tie Rod End |
Function | Tie Rod End |
Cone Size 2 | 16 mm |
Cone Size 1 | 12 mm |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Hose |
Function | Brake Hose |
Weight | 0.110 kg |
Paired article numbers | 183770 |
Length | 518 mm |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium, Plastic |
Number of Connectors / Ports | 2 |
Opening Temperature | 105 °C |
Function | Thermostat, coolant |
Weight | 0.70 kg |
Type | Thermostat, coolant |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 52 mm |
Width | 48 mm |
Material | Rubber |
Thickness | 54 mm |
Inner diameter | 32 mm |
Weight | 0.083 kg |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 140.9 mm |
Width | 72.2 mm |
Additional Information 2 | with anti-squeak plate |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Weight | 2.310 kg |
Thickness/Strength 1 | 18.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with oil sump gasket |
Width | 175 mm |
Weight | 0.425 kg |
Filter type | Screen Filter |
Length | 188.8 mm |
Height | 20 mm |
Function | Hydraulic Filter Kit, automatic transmission |
Type | Hydraulic Filter Kit, automatic transmission |
Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, automatic transmission oil sump (08719)
Important compatibility info
Filter type | Filter Insert |
Function | Air Filter |
Height | 75 mm |
Width | 192 mm |
Length | 219 mm |
Weight | 0.26 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 195131 |
Additional Information 2 | with clamps |
Weight | 0.145 kg |
Placement on Vehicle | Front Axle Right |
Length | 234 mm |
Material | Rubber |
Inner diameter 1 | 15 mm |
Inner diameter 2 | 85 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (101939)
- 1x Febi Clamping Clip (26348)
- 1x Febi Clamping Clip (45642)
Important compatibility info
Function | Radiator Hose |
Extra Description | ProKit |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outer diameter | 60 mm |
Additional Information 2 | with clamps |
Weight | 0.7 kg |
Type | Radiator Hose |
Hose Length | 480 mm |
Wall Thickness | 6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (101421)
- 2x Febi Hose Clamp (48356)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023