Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.871 kg |
| Voltage | 12 V |
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 4 |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.62
Important compatibility info
| Function | Stub Shaft, differential |
| Placement on Vehicle | Front Axle Right |
| Weight | 0.88 kg |
| Type | Stub Shaft, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.67
Important compatibility info
| Weight | 1.400 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.70
Important compatibility info
| Weight | 0.42 kg |
| Function | Heat Exchanger, interior heating |
| Core Length | 186 mm |
| Core Width | 172 mm |
| Core Depth | 34 mm |
| Type | Heat Exchanger, interior heating |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.78
Important compatibility info
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.038 kg |
| Type | Mass Air Flow Sensor |
| for OE number | 1 516 668 |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.79
Important compatibility info
| Weight | 0.8 kg |
| Width of castor bearing surface | 28 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Vibration | with vibration damper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.79
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 1.4 kW |
| Weight | 4.6 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Weight | 3.99 kg |
| Rated Power | 2.5 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 75.3 mm |
| Function | Drive Shaft |
| Paired article numbers | 183389 |
| Weight | 6.604 kg |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 84 mm |
| Min. Length | 956 mm |
| External Teeth, Diff.Side | 25 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Function | Starter |
| Weight | 4.7 kg |
| Voltage | 12 V |
| Rated Power | 2.2 kW |
| Number of Teeth | 9 |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Rated Power | 2 kW |
| Type | Starter |
| Voltage | 12 V |
| Weight | 3.79 kg |
| for OE number | 02E 911 023 LX |
| Number of Teeth | 11 |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16 x 1,5 |
| External Teeth, Wheel Side | 38 |
| Weight | 7.486 kg |
| Min. Length | 622 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 89.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Weight | 4.2 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 2.0 kW |
| Weight | 4.7 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Material | Plastic |
| Type | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| for OE number | 03G 103 469 G |
| Weight | 1.544 kg |
| Colour | Black |
| Additional Information | with gasket/seal |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Min. Length | 494 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Additional Information 2 | with screw |
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 42 |
| Weight | 6.612 kg |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of hub fastening holes | 6 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 154 mm |
| Outer diameter 1 | 72 mm |
| Width | 48.5 mm |
| Outer diameter | 92 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Weight | 4.726 kg |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 30 |
| Weight | 7.402 kg |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 89 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 628 mm |
| External Teeth, Diff.Side | 24 |
| Wheel Sided Joint Diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Cone Size | 19 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 37690 |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Internal Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Weight | 5.00 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 0.450 kg |
| Function | Timing Chain |
| Number of Chain Links | 108 |
| Chain Type | Simplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023