Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Cone Size 2 | 22 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 185214 |
| Weight | 3.698 kg |
| Cone Size | 16.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.77
Important compatibility info
| Function | Timing Chain Kit |
| Weight | 0.780 kg |
| Number of Chain Links | 130 |
| Chain Type | Silent Chain, Closed chain |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (100671)
- 1x Febi Timing Chain (40390)
- 1x Febi Guide, timing chain (36085)
- 1x Febi Guide, timing chain (36224)
£94.78
Important compatibility info
| Additional Information 2 | with seal ring |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
| Length | 355 mm |
| Additional Information | with oil drain plug |
| Function | Oil sump |
| Spanner Size | 19 |
| Weight | 2.19 kg |
| Type | Oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.79
Important compatibility info
| Width | 35 mm |
| Outer diameter | 180 mm |
| Inner diameter | 35 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Weight | 2.535 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
Technical Information
Attention!: The old bolt has to be replaced with the enclosed bolt. Tightening torque specification of the vehicle manufacturer have to be obeyed.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27215)
- 1x Febi Centering Bolt, crankshaft pulley (33619)
£94.79
Important compatibility info
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt Set |
| Tensile Cord Material | Aramid |
| Weight | 1.905 kg |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt Set |
| Length | 1073 mm |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184927)
- 1x Febi Belt Tensioner, v-ribbed belt (186616)
- 1x Febi Belt Tensioner, v-ribbed belt (177943)
£94.80
Important compatibility info
| Outer diameter | 380 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 180 mm |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle, Front Axle |
| Weight | 20.0 kg |
| Internal Thread Size | M18 x 1,5 |
| Rim Hole Number | 8 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.81
Important compatibility info
| Weight | 1.12 kg |
| Width of castor bearing surface | 34 mm |
| Operating Mode | Automatic |
| Track rollers material | Plastic |
| Function | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Outer diameter | 78 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Width | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.82
Important compatibility info
| Pipe Diameter | 42 mm. 81 mm |
| Mounting points diameter | 25 mm |
| Placement on Vehicle | Front |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 3.83 kg |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 335 mm |
| Min. Length | 290 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Weight | 2.15 kg |
| Function | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Pressure | 180 bar |
| Rotation Direction | Clockwise rotation |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 81.47101.6137 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 05269 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 5.277 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Placement on Vehicle | Left |
| Length | 555 mm |
| Outer diameter | 6 mm |
| Operating Mode | Mechanical |
| Weight | 0.050 kg |
| Type | Cable Pull, seat back adjustment |
| Function | Cable Pull, seat back adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Weight | 8.3 kg |
| Placement on Vehicle | Front Axle |
| Length | 1640 mm |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M28 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| for OE number | 1706 036 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Placement on Vehicle | Front and Rear |
| Outer diameter | 151 mm |
| Thickness | 39 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Weight | 0.995 kg |
| Type | Joint, propshaft |
| Extra Description | Powerline |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Length | 1030 mm |
| Thickness | 116 mm |
| Function | Centre Rod Assembly |
| Weight | 7.9 kg |
| Additional Information | with castellated nut and split pins |
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd front axle |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 2.33 kg |
| Type | Hose, air supply |
| Function | Hose, air supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 136 mm |
| Outer diameter | 81 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Weight | 3.63 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Min. Length | 230 mm |
| Pipe Diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Left Front, Right Front |
| Mounting points diameter | 12 mm. 18 mm |
| Weight | 2.05 kg |
| Max. Length | 264 mm |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Weight | 1.100 kg |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Weight | 1.583 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| for OE number | 0361.Q5 |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Weight | 5.75 kg |
| Placement on Vehicle | Centre |
| Length | 485 mm |
| Cone Size | 28.8 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023