Proud to be a UK-based company
Contact us
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
| Placement on Vehicle | Front Axle |
| Length | 1582 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| External Thread Size | M20 x 1,5 |
| Weight | 8.900 kg |
| Pipe Diameter | 38 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 0.530 kg |
| Type | Cylinder Head Gasket Set, air compressor |
| Function | Cylinder Head Gasket Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 10.6 kg |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Number of Wings | 12 |
| Material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 542 200 19 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Width | 29 mm |
| Outer diameter | 156 mm |
| Inner diameter | 25 mm |
| Weight | 1.306 kg |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Weight | 9.95 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 403 200 73 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 0.9 kg |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 205 mm |
| Inner diameter | 9 mm |
| Number of Ribs | 5 |
| Width | 205 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Additional Information | with nuts |
| External Thread Size | M20 x 1,5 |
| Function | Centre Rod Assembly |
| Rod/Strut | Guide Rod |
| Length | 686 mm |
| Placement on Vehicle | Rear Axle |
| Extra Description | ProKit |
| Diameter 1 | 48 mm |
| Weight | 6.900 kg |
| Cone Size | 28.6 mm. 32 mm |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Additional Information | with gasket/seal |
| Seal Material | Rubber/Metal |
| Operating Mode | pneumatic |
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
| Weight | 1.349 kg |
| Number of grooves | 7 |
| Additional Information 2 | switchable water pump |
| Material | Cast Aluminium |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Operating Mode | Pneumatic |
| Function | Shock Absorber, driver cab suspension |
| Weight | 4.41 kg |
| Max. Length | 377 mm |
| Mounting points diameter | 13 mm |
| Piston conrod diameter | 14 mm |
| External Thread Size | M14 x 1,5 |
| Min. Length | 249 mm |
| Pipe Diameter | 44 mm. 81 mm |
| Type | Shock Absorber, driver cab suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 1.850 kg |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Aluminium |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 23939 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 13.5 kg |
| External Thread Size | M24 x 1,5 |
| Cone Size | 31.5 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Pipe Diameter | 62 mm |
| Function | Centre Rod Assembly |
| Length | 1028 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 3.014 kg |
| Length | 200 mm |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Outer diameter | 43 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (24773)
- 1x Febi Bush, kingpin (171963)
- 2x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Lock Ring, steering knuckle (171964)
- 2x Febi Circlip (03729)
- 1x Febi Spacer, kingpin (28069)
- 1x Febi Spacer, kingpin (28070)
- 1x Febi Spacer, kingpin (28071)
- 1x Febi Spacer, kingpin (28072)
- 1x Febi Spacer, kingpin (28073)
- 1x Febi Spacer, kingpin (28074)
- 1x Febi Spacer, kingpin (28075)
- 1x Febi Spacer, kingpin (28076)
- 1x Febi Bush, steering knuckle (107409)
- 1x Febi Seal Ring, steering knuckle (107195)
£95.82
Important compatibility info
| Weight | 21.3 kg |
| Rim Hole Number | 10 -Hole |
| Outer diameter | 376 mm |
| Thickness | 57.5 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 39 mm |
| Bolt Hole Circle Diameter | 190 mm |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Weight | 0.660 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.7 kW |
| Type | Starter |
| Function | Starter |
| Weight | 3.59 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 0.44 kg |
| Function | Front Cover Lock |
| Placement on Vehicle | Right |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 2.3 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 256 mm |
| Min. Length | 157 mm |
| Pipe Diameter | 42 mm. 78 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 99 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| Bolt Hole Circle Diameter | 86 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 5.778 kg |
| Number of mounting bores | 6 |
| Min. Length | 626 mm |
| ABS Ring Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 2.17 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40305 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Lower Front Axle, Right Front |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21740)
- 1x Febi Screw (36678)
- 1x Febi Nut (34653)
- 1x Febi Nut (38356)
£95.83
Important compatibility info
| Weight | 1.2 kg |
| Extra Description | Standard Medium Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 03E 198 229 A S1 |
| Timing Chain Size | G53HP, G53HR, G53AM, G53HC |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17617)
- 2x Febi Gear/Sprocket, camshaft (27080)
- 1x Febi Sprocket, crankshaft (27068)
- 1x Febi Tensioner, timing chain (25412)
- 1x Febi Guide, timing chain (25457)
- 1x Febi Guide, timing chain (25467)
- 2x Febi Bolt, camshaft gear (32183)
- 1x Febi Pulley Bolt (32025)
£95.92
Important compatibility info
| Weight | 1.9 kg |
| Placement on Vehicle | Right, Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.92
Important compatibility info
| Placement on Vehicle | Right Front, Lower |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.819 kg |
| Type | Mounting, engine |
| Paired article numbers | 182740 |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.92
Important compatibility info
| Extra Description | Basic Short Kit |
| Weight | 0.773 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 170 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 06H 109 158 J S2 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45956)
- 1x Febi Tensioner, timing chain (49551)
- 1x Febi Guide, timing chain (102437)
- 1x Febi Guide, timing chain (102194)
- 1x Febi Guide, timing chain (102427)
£95.93
Important compatibility info
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Width | 25 mm |
| Number of Teeth | 145 |
| Weight | 0.947 kg |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Tensioner Pulley, timing belt (47604)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (103622)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (199433)
£95.97
Important compatibility info
| for OE number | 74 20 981 966 |
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| Weight | 0.69 kg |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.98
Important compatibility info
| Length | 524 mm |
| Height | 56 mm |
| Width | 344 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Additional Information 2 | with bolts/screws |
| Filter type | Screen Filter |
| Transmission Type | Automatic Transmission |
| Weight | 1.15 kg |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.05
Important compatibility info
| Length | 222 mm |
| Width | 44 mm |
| Outer diameter | 73 mm |
| Thickness | 140 mm |
| Inner diameter | 47 mm |
| Function | Suspension, propshaft |
| Weight | 1.045 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.06
Important compatibility info
| Weight | 1.172 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 755 mm |
| Inner length 2 | 715 mm |
| Outer length 1 | 1083 mm |
| Outer length 2 | 987 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.07
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Weight | 2.273 kg |
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.09
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 137 |
| for OE number | 028 198 119 C S2 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 2.07 kg |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (01287)
- 1x Febi Timing Belt Kit (14626)
£96.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023