Important compatibility info
Weight | 2.888 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 134 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 114 mm |
Outer diameter 1 | 45 mm |
Outer diameter 2 | 62 mm |
Function | Wheel Hub |
Weight | 1.6 kg |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Width | 79 mm |
Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 28.5 mm |
Thickness | 64 mm |
Type | Mounting, stabiliser bar |
Weight | 0.240 kg |
Placement on Vehicle | Rear Axle |
Function | Mounting, stabiliser bar |
Material | Rubber/Metal |
Width | 50 mm |
Length | 77 mm |
Number of markings | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Weight | 0.030 kg |
Function | Ignition Switch |
Extra Description | febi Plus |
Type | Ignition Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Additional Information 2 | with bolts/screws |
Bolt Hole Circle Diameter | 78 mm |
Function | Joint, propshaft |
Number of Holes | 6 |
Extra Description | ProKit |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (34744)
- 6x Febi Screw (43595)
Important compatibility info
Width of castor bearing surface | 25 mm |
Outer diameter | 50 mm |
Inner diameter | 10 mm |
Weight | 0.136 kg |
Material | Plastic |
Function | Deflection Pulley/Guide Pulley, timing belt |
Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 85 mm |
Filter type | Spin-on Filter |
Weight | 0.391 kg |
Type | Fuel filter |
Function | Fuel filter |
Internal Thread Size | M16 x 1,5 |
Height | 142 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 162 mm |
Height | 88 mm |
Outer diameter | 70 mm |
Filter type | In-Line Filter |
Weight | 0.23 kg |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Function | Stop Light Switch |
Type | Stop Light Switch |
for OE number | 443 945 515 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.9 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 41807 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Thread Size | M16x1,5 |
Weight | 2.554 kg |
Type | Joint Kit, drive shaft |
Internal Teeth, wheel side | 28 |
External Teeth, Wheel Side | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.24 kg |
Material | Steel |
Spanner Size | 17 |
Paired article numbers | 42098 |
Rod/Strut | Coupling Rod |
Colour | Black |
Placement on Vehicle | Front Axle Left |
Length | 90 mm |
Extra Description | ProKit |
Additional Information | with nuts |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Adjuster, braking system |
Weight | 3.1 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 11.08 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 345 mm |
Brake Disc Thickness | 30 mm |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Number of mounting bores | 1 |
Machining | High-carbon |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Thickness | 52.1 mm |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.008 kg |
Thickness | 5.4 mm |
Function | Gasket, oil filter housing |
Material | ACM (Polyacrylate) |
Type | Gasket, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.64 kg |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Material | Rubber/Metal |
Type | Mounting, engine |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
for OE number | 61 67 7 283 213 |
Weight | 0.13 kg |
Placement on Vehicle | both sides |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Placement on Vehicle | Upper |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Holder, engine mounting system |
Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tensioner, timing chain |
Operating Mode | Hydraulic |
Weight | 0.144 kg |
Length | 80 mm |
Width | 27 mm |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 58 mm |
Function | Wheel Bearing Kit |
Additional Information 2 | with retaining ring |
Inner diameter | 28 mm |
Weight | 0.544 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Width | 44 mm |
Additional Information | with axle nut |
Replaces | 30574 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.235 kg |
Number of Connectors / Ports | 4 |
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
for OE number | 03C 906 051 F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1162 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.175 kg |
Function | V-Ribbed Belt |
Number of Ribs | 10 |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Width | 32 mm |
Outer diameter | 65.5 mm |
Inner diameter | 8 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, tilt cylinder |
Type | Repair Kit, tilt cylinder |
Weight | 0.41 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.681 kg |
Type | Throttle body |
Function | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.690 kg |
Thickness | 50 mm |
Inner diameter | 13 mm |
Number of Ribs | 8 |
Outer diameter 1 | 145 mm |
Outer diameter 2 | 167 mm |
Function | Belt Pulley, crankshaft |
Parameter | 6PK + 4PK |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.95 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 90 mm |
Material | Rubber/Metal |
Outer diameter | 48 mm |
Inner diameter | 14.4 mm |
Type | Bushing, leaf spring |
Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 95 mm |
Additional Information | with lock nut |
Weight | 0.43 kg |
Type | Tie Rod End |
Function | Tie Rod End |
Cone Size 2 | 16 mm |
Cone Size 1 | 12 mm |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Hose |
Function | Brake Hose |
Weight | 0.110 kg |
Paired article numbers | 183770 |
Length | 518 mm |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium, Plastic |
Number of Connectors / Ports | 2 |
Opening Temperature | 105 °C |
Function | Thermostat, coolant |
Weight | 0.70 kg |
Type | Thermostat, coolant |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023