Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 457 200 29 01 S1 |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.18
Important compatibility info
| Belts | with rounded tooth profile |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Number of Teeth | 153 |
| Type | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Surface | Coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (28107)
- 1x Febi Water Pump, engine cooling (21877)
£127.18
Important compatibility info
| Outer diameter | 300 mm |
| Material | Steel |
| Length | 609 mm |
| Capacity | 36 l |
| Operating Pressure | 12.5 bar |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.21
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 183634 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 586 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.22
Important compatibility info
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.22
Important compatibility info
| Hole Spacing | 152 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 575 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Bearing/Mounting Type | Molecular Bearing |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.24
Important compatibility info
| Cone Size | 30 mm |
| Additional Information 2 | with crown nut |
| Width | 120 mm |
| Height | 120 mm |
| Length | 520 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Diameter 1 | 60 mm |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.26
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Outer diameter | 57 mm |
| Material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.27
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 41757 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.31
Important compatibility info
| for OE number | 23897048 |
| Function | Accelerator Pedal |
| Type | Accelerator Pedal |
| Operating Mode | Electronic |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.38
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 96 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G68HP, G68HR |
| Replaces | 36593 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Gear/Sprocket, camshaft (39526)
- 1x Febi Timing Chain (25444)
- 1x Febi Guide, timing chain (30257)
- 1x Febi Guide, timing chain (30258)
- 1x Febi Tensioner, timing chain (25408)
£127.41
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Paired article numbers | 185906 |
| Cone Size 2 | 28 mm |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.44
Important compatibility info
| Function | Repair Kit, kingpin |
| Length | 222.5 mm |
| Outer diameter | 50 mm |
| Paired article numbers | 11403 |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Seal Ring, steering knuckle (05868)
- 2x Febi Seal Ring, steering knuckle (15795)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (03727)
- 1x Febi Spacer, kingpin (15797)
£127.45
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 41756 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.45
Important compatibility info
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 25.4 mm |
| Placement on Vehicle | Front Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171121)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
£127.45
Important compatibility info
| Width | 23 mm |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 148 |
| Surface | PTFE (Polytetrafluorethylene) coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (30586)
- 1x Febi Water Pump, engine cooling (24358)
£127.46
Important compatibility info
| for OE number | 038 145 771 AH S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.60
Important compatibility info
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 273 mm. 230 mm |
| Thickness | 167 mm. 527 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.62
Important compatibility info
| Steering arm type | Trailing Arm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | both sides |
| Length | 625 mm |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.68
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186660, 187042 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.68
Important compatibility info
| Operating Mode | Electronic |
| for OE number | 23897052 |
| Function | Accelerator Pedal |
| Type | Accelerator Pedal |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.71
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Additional Information 2 | with crown nut |
| Outer diameter | 52 mm |
| Length | 1512 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M35 x 1,5 LHT |
| External Thread Size | M20 x 1,5 |
| Cone Size | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.74
Important compatibility info
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm |
| Rod/Strut | Coupling Rod |
| Cone Size | 38 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.74
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| for OE number | 18011-R1A- A00 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.78
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.78
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 2320 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Placement on Vehicle | Right |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.78
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 57 mm |
| Material | Cast Iron |
| Paired article numbers | 182272 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.92
Important compatibility info
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182271 |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.92
Important compatibility info
| Function | Repair Set, propshaft centre bearing |
| Bearing Type | Cylindrical Roller Bearing |
| Inner diameter | 30 mm |
| Width | 20 mm |
| Type | Repair Set, propshaft centre bearing |
| Hole Spacing | 68 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (38548)
- 1x Febi Boot, propshaft (100491)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38758)
£127.94
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2.5 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.95
Important compatibility info
| Length | 52 mm |
| Spanner Size | 27 |
| Function | Sensor, compressed-air system |
| External Thread Size | M16 x 1,5 |
| Type | Sensor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.09
Important compatibility info
| Function | Connecting Cable, injector |
| Extra Description | febi Plus |
| Type | Connecting Cable, injector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.11
Important compatibility info
| Rated Power | 2.2 kW |
| Number of Teeth | 9 |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.12
Important compatibility info
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Max. Length | 679 mm |
| Min. Length | 427 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Placement on Vehicle | Front Axle |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 60 mm. 50 mm |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Function | Tilt Pump, driver cab |
| Internal Thread Size | M10 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Hole Spacing | 75 mm |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 185905 |
| Cone Size 2 | 28 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 29 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 809 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.20
Important compatibility info
| Colour Coding | Yellow |
| Number of Connectors / Ports | 2 |
| Type | Injector |
| Function | Injector |
| Additional Information | with gaskets/seals |
Additional Information
Technical Information
Please compare the colour coding.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.28
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 573 mm |
| Min. Length | 353 mm |
| Pipe Diameter | 63.5 mm. 73 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.28
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 92 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.31
Important compatibility info
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 24 mm |
| Placement on Vehicle | Front Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171101)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
£128.33
Important compatibility info
| Width of castor bearing surface | 46 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 74 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.43
Important compatibility info
| Function | Expansion Tank, coolant |
| Additional Information 2 | with lid |
| Opening Pressure | 1.3 bar |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.43
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 93.5 mm |
| Wheel Sided Joint Diameter | 102.8 mm |
| External Teeth, Diff.Side | 28 |
| Min. Length | 1028 mm |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.43
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 596 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.45
Important compatibility info
| Type | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.45
Important compatibility info
| Function | Vacuum Pump, braking system |
| Additional Information | with gasket/seal |
| Type | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.49
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 168 |
| for OE number | 16 06 305 S2 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (28375)
- 1x Febi Water Pump, engine cooling (17283)
£128.49
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 570 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, control/trailing arm (35324)
£128.53
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 96 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Replaces | 39593 |
| Type | Timing Chain Kit |
| Timing Chain Size | G68HP, G68HR |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (38014)
- 1x Febi Guide, timing chain (30257)
- 1x Febi Tensioner, timing chain (25408)
- 2x Febi Gear/Sprocket, camshaft (39526)
- 1x Febi Timing Chain (25444)
£128.53
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023