Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.67
Important compatibility info
| Rod/Strut | Push Rod |
| Length | 620 mm |
| Outer diameter | 40 mm |
| Cone Size | 30.2 mm |
| Thread Type | with left-hand thread, with right-hand thread |
| Placement on Vehicle | from 1st to 2nd intermediate steering lever |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 396 mm |
| Min. Length | 314 mm |
| Pipe Diameter | 45 mm. 55 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter, Left |
| Type | Sensor, exhaust gas temperature |
| for OE number | 07Z 906 088 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Voltage | 12 V |
| Function | Alternator |
| Type | Alternator |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Operating Mode | Mechanical |
| Additional Information 2 | Requires special tools for mounting |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Number of Connectors / Ports | 2 |
| Voltage | 19 V |
| Spanner Size | 36 |
| Function | Glow Plug |
| Glow Plug Type | Flame Glow Plug |
| Type | Glow Plug |
| External Thread Size | M32 x 1,5 |
| Length | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Colour | Black |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Paired article numbers | 176147 |
| Material | Plastic |
| Placement on Vehicle | Right |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Paired article numbers | 183908 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 28 |
| Max. Length | 617 mm |
| Min. Length | 567 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Thread Size | M27x1,5 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 971 mm |
| Wheel Sided Joint Diameter | 86.2 mm |
| Transmission-side joint diameter | 81.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| for OE number | 403 180 17 01 |
| Type | Oil Pump |
| Function | Oil Pump |
| Number of Teeth | 44. 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Quality/ Grade | 10.9 |
| Function | Cylinder Head Bolt Set |
| Length | 152 mm |
| Spanner Size | 17 |
| External Thread Size | M12 x 1,75, M16 x 2 |
| Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Cylinder Head Bolt (18476)
- 34x Febi Cylinder Head Bolt (18477)
£104.68
Important compatibility info
| Placement on Vehicle | Front, Left |
| Number of Connectors / Ports | 2 |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.69
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 337 mm |
| Thickness | 61.9 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.74
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.75
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 745 mm |
| Steering arm type | Control Arm |
| Bore Diameter | 21 mm |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.79
Important compatibility info
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Function | Tilt Pump, driver cab |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Hole Spacing | 70 mm |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.83
Important compatibility info
| Placement on Vehicle | Lower, Right Front |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196592 |
| Cone Size | 23.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 16 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.86
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Additional Information | with lock nut, with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196515 |
| Cone Size | 23.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 23.5 mm |
| Cone Size 1 | 16 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.86
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| External Thread Size | M20 x 2,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.88
Important compatibility info
| Type | Expansion Tank, coolant |
| for OE number | 2 850 848 |
| Material | Plastic |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.89
Important compatibility info
| Height | 211 mm |
| Type | Air Filter |
| Function | Air Filter |
| Width | 186 mm |
| Filter type | Filter Insert |
| Length | 486 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.03
Important compatibility info
| Port / Connector type | - |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.14
Important compatibility info
| Operating Mode | Hydraulic |
| Thickness | 54 mm |
| Function | Tensioner, timing belt |
| Outer diameter | 32 mm |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.19
Important compatibility info
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Thickness | 73.2 mm |
| Brake Disc Thickness | 30 mm |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
| Number of mounting bores | 1 |
| Outer diameter | 340 mm |
| Function | Brake Disc |
| Machining | High-carbon |
| Minimum thickness | 28.4 mm |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.22
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184883 |
| Cone Size | 16.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 21 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.25
Important compatibility info
| Piston conrod diameter | 15 mm |
| Mounting points diameter | 16 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 645 mm |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top eye |
| Pipe Diameter | 54 mm. 63 mm |
| Min. Length | 461 mm |
| Shock Absorber Type | Oil Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.27
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Aluminium |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Additional Information | with electric motor |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 182955 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.31
Important compatibility info
| Type | Brake Caliper |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Right |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182954 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Aluminium |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.31
Important compatibility info
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| for OE number | 2 853 196 |
| Cone Size | 30 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Length | 1743 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023