Proud to be a UK-based company
Contact us
Important compatibility info
| Inner length 1 | 912 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 722 mm |
| Outer length 1 | 1070 mm |
| Outer length 2 | 1017 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Steering arm type | Control Arm |
| Cone Size | 25 mm |
| Paired article numbers | 180968 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Wheel Sided Joint Diameter | 91.2 mm |
| Type | Drive Shaft |
| Additional Information | with Split Pin |
| Function | Drive Shaft |
| Transmission-side joint diameter | 88.8 mm |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 921 mm |
| External Teeth, Diff.Side | 37 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Diff.Side | 28 |
| Min. Length | 964 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 87.5 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 40 |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Material | Metal |
| Width of castor bearing surface | 30 mm |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.8 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1.7 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Outer diameter | 153 mm |
| Thickness | 41.5 mm |
| Inner diameter | 30 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Width | 41 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Teeth | 2 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.81
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Outer diameter | 228 mm. 220 mm |
| Thickness | 122 mm. 385 mm |
| Paired article numbers | 102809 |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| External Thread Size | M7 x 1, M10 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.82
Important compatibility info
| Stabiliser Diameter | 19.6 mm |
| Placement on Vehicle | Rear Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information | with rubber mounts |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171117)
- 2x Febi Link/Coupling Rod, stabiliser bar (102444)
£97.83
Important compatibility info
| Centering Diameter | 79 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 76 mm |
| Outer diameter | 344 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.87
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Function | Spring-loaded Cylinder |
| Piston Rod Length | 15 mm |
| Distance of fastening bolts | 120 mm |
| Type | Spring-loaded Cylinder |
| Parameter | Typ 16 / 24 |
| Additional Information | with fastening/mounting material |
| Brake Type | Disc Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.90
Important compatibility info
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Colour | Black |
| Additional Information | with gasket/seal |
| Type | Cylinder Head Cover |
| for OE number | 03L 103 469 F |
| Material | Plastic |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.90
Important compatibility info
| Stabiliser Diameter | 19.6 mm |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171119)
- 2x Febi Link/Coupling Rod, stabiliser bar (36989)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
£97.91
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 31 |
| External Teeth, Diff.Side | 41 |
| Min. Length | 754 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 95.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.93
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Paired article numbers | 182138 |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (39575)
- 1x Febi Rolling Bearing, suspension strut support mount (179052)
- 3x Febi Nut (37858)
£97.94
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184888 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 21 mm |
| External Thread Size | M14 x 1,5 |
| Cone Size | 16.6 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.94
Important compatibility info
| Housing material | Aluminium |
| Operating Mode | Mechanical |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | non-switchable water pump, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.97
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Outer diameter | 228 mm. 220 mm |
| Thickness | 122 mm. 385 mm |
| Paired article numbers | 102721 |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| External Thread Size | M7 x 1, M10 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.02
Important compatibility info
| Function | Brake Disc |
| Additional Information 2 | with bolts/screws |
| Centering Diameter | 181 mm |
| Surface | Coated |
| Minimum thickness | 41 mm |
| Brake Disc Type | Internally Vented |
| Placement on Vehicle | Rear Axle, Front Axle |
| Outer diameter | 375 mm |
| Brake Disc Thickness | 45 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.06
Important compatibility info
| Placement on Vehicle | Left |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.06
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 385 mm |
| Thickness | 62.1 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Paired article numbers | 107503 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.08
Important compatibility info
| Rolling piston material | Plastic |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm. 200 mm |
| Thickness | 298 mm. 640 mm |
| Function | Bellow, air suspension |
| External Thread Size | M22 x 1,5 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.10
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 775 mm |
| Shock Absorber Type | Oil Pressure |
| Min. Length | 455 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Mounting points diameter | 16 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.17
Important compatibility info
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| External Thread Size | M16 x 1,5 |
| Length | 421 mm |
| Wet Sump Material | Aluminium |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.19
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| for OE number | 52070967 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.22
Important compatibility info
| Housing Type | with housing |
| Material | Plastic |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| for OE number | 13 62 7 566 986 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.23
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.23
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 443 mm |
| Min. Length | 273 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.26
Important compatibility info
| Filter type | Activated Carbon Filter, High efficiency air filter (HEPA) |
| Height | 31 mm |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Length | 1022 mm |
| Width | 318 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.27
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 715 mm |
| Wheel Sided Joint Diameter | 89.8 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.27
Important compatibility info
| Function | Timing Chain Kit |
| Timing Chain Size | G53HC |
| Type | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| for OE number | 98 228 270 80 S3 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (171786)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
£98.31
Important compatibility info
| Inner diameter 2 | 44 mm |
| Function | Intake Hose, air filter |
| Material | Rubber |
| Inner diameter 1 | 70 mm |
| Hose Length | 195 mm |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.33
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 120 |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21724)
- 1x Febi Water Pump, engine cooling (24360)
£98.35
Important compatibility info
| Number of Connectors / Ports | 22 |
| Combi Switch Function | with indicator function, with wipe-wash function, with hazard warning light function, with high beam function, with light dimmer function, with park light function, with headlight flasher |
| for OE number | 001 540 46 45 |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
| Vehicle Equipment 2 | for vehicles with indirect parking light control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.37
Important compatibility info
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Material | Cast Aluminium |
| Paired article numbers | 183206 |
| Placement on Vehicle | Rear Axle Right |
| Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.38
Important compatibility info
| Additional Information | with piston |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Thickness | 370 mm. 146 mm |
| External Thread Size | M20 x 2,5, M14 x 1,5, M12 x 1,75 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm. 258 mm |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.39
Important compatibility info
| Rolling piston material | Steel |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm. 179 mm |
| Thickness | 205 mm. 540 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.43
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Outer diameter | 227 mm. 340 mm |
| Thickness | 240 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.43
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.43
Important compatibility info
| Type | Clock Spring, airbag |
| Extra Description | febi Plus |
| Function | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.48
Important compatibility info
| Width of castor bearing surface | 20 mm |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 038 903 315 P |
| Type | Belt Tensioner, v-ribbed belt |
| Vibration | with vibration absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 64.5 mm |
| Outer diameter | 297.5 mm |
| Thickness | 98.5 mm |
| Inner diameter | 254.2 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 79 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 255.6 mm |
| Function | Brake Drum |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 716 mm |
| Min. Length | 433 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Material | Steel |
| Outer diameter | 396 mm |
| Number of Connectors / Ports | 4 |
| Capacity | 50 l |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Operating Pressure | 15 bar |
| Length | 498 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.55
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Mounting bores distance | 75 mm |
| Shock Absorber Type | Gas Pressure |
| Max. Length | 573 mm |
| Bore Diameter | 14 mm |
| Min. Length | 369 mm |
| Type | Shock Absorber |
| Piston conrod diameter | 28 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Pipe Diameter | 58 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.58
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023