Proud to be a UK-based company
Contact us
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.07
Important compatibility info
| Function | Joint, propshaft |
| Outer diameter | 160 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
| Number of Holes | 8 |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101772)
- 8x Febi Collar Bolt, propshaft (31177)
- 8x Febi Nut (19104)
- 8x Febi Washer (19107)
£106.09
Important compatibility info
| Function | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Type | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Material | Plastic |
| Extra Description | febi Plus |
| Colour | Black |
| for OE number | 04L 103 469 Q |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.10
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Housing material | Grey Cast Iron |
| Seal Material | Rubber, Paper |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.12
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.12
Important compatibility info
| Minimum thickness | 38 mm |
| Bolt Hole Circle Diameter | 144 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Surface | Coated |
| Function | Brake Disc |
| Number of Holes | 10 |
| Thickness | 99 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 375 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.16
Important compatibility info
| Type | Repair Kit, driver cab suspension |
| Function | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.17
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.RL |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.18
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 181887 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.19
Important compatibility info
| Brake caliper piston diameter | 36 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181886 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.19
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Bore Diameter | 42 mm |
| Rod/Strut | Pull Rod |
| Length | 415 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.33
Important compatibility info
| Number of Teeth | 11 |
| Rated Power | 2.3 kW |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.35
Important compatibility info
| Placement on Vehicle | behind exhaust turbocharger |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.36
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 492 mm |
| Min. Length | 327 mm |
| Pipe Diameter | 74 mm. 66 mm |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Replaces | 20001; 20327 |
| Type | Shock Absorber |
| Placement on Vehicle | Front Axle, Rear Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.41
Important compatibility info
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Pipe Diameter | 63.5 mm. 54 mm |
| Mounting points diameter | 20 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Max. Length | 865 mm |
| Min. Length | 495 mm |
| External Thread Size | M14 x 1,5 |
| Replaces | 20145 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.41
Important compatibility info
| Centering Diameter | 79 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 76 mm |
| Outer diameter | 344 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.41
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear Axle, Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 490 mm |
| Min. Length | 308 mm |
| Pipe Diameter | 54 mm. 63 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20314 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.41
Important compatibility info
| Type | Starter |
| Function | Starter |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.44
Important compatibility info
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Outer diameter | 273 mm. 227 mm |
| Thickness | 130 mm. 480 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Seal Diameter | 81.5 mm |
| External Teeth, Diff.Side | 26 |
| Number of Teeth, ABS ring | 48 |
| Min. Length | 976 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023