Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.73
Important compatibility info
| Function | Cylinder Liner, air compressor |
| Type | Cylinder Liner, air compressor |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.73
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Material | Aluminium |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.76
Important compatibility info
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Type | Pressure converter, turbocharger |
| Function | Pressure converter, turbocharger |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.76
Important compatibility info
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Colour | Black |
| for OE number | 11 12 7 568 581 |
| Function | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.76
Important compatibility info
| Type | Brake Caliper |
| Paired article numbers | 186223 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Brake caliper piston diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.77
Important compatibility info
| Type | Brake Caliper |
| Paired article numbers | 186222 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.77
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 273 mm. 210 mm |
| Thickness | 156 mm. 606 mm |
| External Thread Size | M16 x 1,5, M12 x 1,5, M18 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.79
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 37349 |
| Bolt Head Diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holders |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Outer diameter | 180 mm |
| Bolt Hole Circle Diameter | 147 mm |
| Parameter | VL121R |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Type | Clutch, radiator fan |
| Parameter | VL121R |
| Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| for OE number | 06 52 171 |
| Wet Sump Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Additional Information 2 | with wheel studs |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Bolt Hole Circle Diameter | 205 mm |
| Brake Disc Thickness | 25.2 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 23 mm |
| Thickness | 160 mm |
| Function | Brake Disc |
| Surface | Coated |
| External Thread Size | M18 x 1,5 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 894 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| for OE number | 11 31 8 618 318 S8 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Tensioner, timing chain (47638)
- 1x Febi Sprocket, crankshaft (30477)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
£97.80
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left, Upper |
| Steering arm type | Control Arm |
| Paired article numbers | 43092 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 17 mm |
| Cone Size 2 | 19 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Rear Axle, Upper, Centre |
| Length | 522 mm |
| Outer diameter | 46 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39352 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | with ball joint |
Additional Information
Technical Information
After mounting the screw of the back-end control arm bush has to be tightened with 55 Nm + 90° + 15°
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (36595)
£97.80
Important compatibility info
| Replaces | 44598 |
| Suction side external thread size | M12 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Pressure side external thread size | M14 x 1,5 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Hole Spacing | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Material | Steel |
| Outer diameter | 149 mm |
| Thickness | 32 mm |
| Inner diameter | 31 mm |
| Number of Ribs | 5 |
| Number of Connectors / Ports | 6 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43093 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 17 mm |
| External Thread Size | M16 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size 2 | 19 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Type | Air Dryer, compressed-air system |
| Function | Air Dryer, compressed-air system |
| Voltage | 24 V |
| Additional Information 2 | with integrated oil separator, with dryer |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Mounting points diameter | 10.5 mm |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| for OE number | 002 460 54 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Type | Starter |
| Function | Starter |
| Number of Teeth | 11 |
| Rated Power | 2.1 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Width | 40.6 mm |
| Outer diameter | 54 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
Technical Information
Depending on fitted component and/or vehicle specification the use of a special tool can be necessary
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Inner diameter | 26 mm |
| Placement on Vehicle | Rear Axle |
| Width | 133 mm |
| Outer diameter | 68 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 829 mm. 881 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M38 x 1,5 LHT, M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Function | Interior Blower |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Number of Chain Links | 110 |
| Chain Type | Simplex, with chain lock |
| Function | Timing Chain Kit |
| for OE number | ME192230 S2 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain Kit (102440)
- 1x Febi Guide, timing chain (106656)
£97.80
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 52 mm |
| Length | 908 mm |
| Rod/Strut | Push Rod |
| Cone Size | 23.93 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Length | 140 mm |
| Internal Thread Size | M16 x 1,5 |
| Number of Connectors / Ports | 2 |
| Height | 115 mm |
| Width | 120 mm |
| Rotation Direction | Clockwise rotation |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 75 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear, both sides |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 405 mm |
| Min. Length | 287 mm |
| Pipe Diameter | 62 mm. 43 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Number of Connectors / Ports | 5 |
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
| for OE number | 81.30550.0089 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Length | 669 mm |
| Placement on Vehicle | Front Axle |
| Additional Information | with nuts |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 178869 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 178868 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Inner length 1 | 912 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 722 mm |
| Outer length 1 | 1070 mm |
| Outer length 2 | 1017 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Steering arm type | Control Arm |
| Cone Size | 25 mm |
| Paired article numbers | 180968 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Wheel Sided Joint Diameter | 91.2 mm |
| Type | Drive Shaft |
| Additional Information | with Split Pin |
| Function | Drive Shaft |
| Transmission-side joint diameter | 88.8 mm |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 921 mm |
| External Teeth, Diff.Side | 37 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Diff.Side | 28 |
| Min. Length | 964 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 87.5 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 40 |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Material | Metal |
| Width of castor bearing surface | 30 mm |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.8 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1.7 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Outer diameter | 153 mm |
| Thickness | 41.5 mm |
| Inner diameter | 30 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Width | 41 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Teeth | 2 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.81
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023