Important compatibility info
Weight | 5.31 kg |
Paired article numbers | 37350 |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Bolt Head Diameter | 17 mm |
Material | Cast Steel |
External Thread Size | M12 x 1,25, M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holders |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rated Power | 1.7 kW |
Weight | 3.5 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Plastic |
Function | Water Pump & Timing Belt Kit |
Type | Water Pump & Timing Belt Kit |
Weight | 1.42 kg |
Seal Material | Rubber |
Belts | with trapezoidal tooth profile |
Number of Teeth | 168 |
for OE number | 55210628 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11083)
- 1x Febi Water Pump, engine cooling (10599)
Important compatibility info
Voltage | 12 V |
Number of Teeth | 11 |
Rated Power | 2.2 kW |
Weight | 3.7 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,75 |
Placement on Vehicle | Rear |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Max. Length | 405 mm |
Min. Length | 287 mm |
Pipe Diameter | 62 mm. 43 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 13 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Weight | 2.33 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Type | Starter |
Function | Starter |
Weight | 3.84 kg |
Number of Teeth | 11 |
Rated Power | 2.1 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Weight | 6.15 kg |
Placement on Vehicle | Front Axle Left, Upper |
Steering arm type | Control Arm |
Paired article numbers | 43092 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size | 17 mm |
Cone Size 2 | 19 mm |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Weight | 10.400 kg |
Rod/Strut | Push Rod |
Length | 669 mm |
Placement on Vehicle | Front Axle |
Additional Information | with nuts |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Adjustable | Adjustable on one side |
Pipe Diameter | 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 140 mm |
Internal Thread Size | M16 x 1,5 |
Number of Connectors / Ports | 2 |
Height | 115 mm |
Width | 120 mm |
Rotation Direction | Clockwise rotation |
Function | Hydraulic Pump, steering |
Weight | 2.302 kg |
Type | Hydraulic Pump, steering |
for OE number | 002 460 75 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.491 kg |
Type | Air Dryer, compressed-air system |
Function | Air Dryer, compressed-air system |
Voltage | 24 V |
Additional Information 2 | with dryer, with integrated oil separator |
Rated Power | 100 W |
Cut-off Pressure | 12 bar |
Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Rated Power | 0.8 kW |
Weight | 3.3 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Clutch, radiator fan |
Weight | 0.827 kg |
Parameter | VL121R |
Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner length 1 | 912 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Driver Position | for right-hand drive vehicles |
Weight | 1.358 kg |
Inner length 2 | 722 mm |
Outer length 1 | 1070 mm |
Outer length 2 | 1017 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Rear, both sides |
Weight | 1.750 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.24 kg |
Internal Thread Size | M26 x 1,5, M16 x 1,5 |
Rotation Direction | Anticlockwise rotation |
Number of Connectors / Ports | 2 |
Mounting points diameter | 10.5 mm |
Type | Hydraulic Pump, steering |
Function | Hydraulic Pump, steering |
for OE number | 002 460 54 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 2.2 kW |
Weight | 4.5 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 24321-03000 S2 |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 160 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Weight | 0.838 kg |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (176113)
- 1x Febi Tensioner, timing chain (108339)
- 1x Febi Guide, timing chain (181876)
- 1x Febi Guide, timing chain (177613)
- 1x Febi Guide, timing chain (108342)
- 1x Febi Guide, timing chain (108343)
Important compatibility info
Steering arm type | Control Arm |
Cone Size | 25 mm |
Paired article numbers | 180968 |
Weight | 7.631 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Chain Links | 110 |
Chain Type | Simplex, with chain lock |
Weight | 1.570 kg |
Function | Timing Chain Kit |
for OE number | ME192230 S2 |
Type | Timing Chain Kit |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain Kit (102440)
- 1x Febi Guide, timing chain (106656)
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | with electric motor |
Operating Mode | Electric |
Paired article numbers | 178869 |
Number of Connectors / Ports | 2 |
Weight | 1.6 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023