Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 3 |
| Weight | 0.150 kg |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.92
Important compatibility info
| Number of Ribs | 5 |
| Parameter | 6PK |
| Width | 85 mm |
| Outer diameter | 192 mm |
| Inner diameter | 32 mm |
| Function | Belt Pulley, crankshaft |
| Weight | 2.6 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with screw, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (29990)
- 1x Febi Washer, crankshaft pulley (33599)
- 1x Febi Centering Bolt, crankshaft pulley (33601)
£98.94
Important compatibility info
| Weight | 1.111 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Timing Chain Size | G68HR |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40428)
- 1x Febi Tensioner, timing chain (46511)
- 1x Febi Guide, timing chain (104078)
- 1x Febi Guide, timing chain (46773)
- 1x Febi Guide, timing chain (105999)
- 1x Febi Guide, timing chain (105998)
£98.94
Important compatibility info
| Brake caliper piston diameter | 41 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Paired article numbers | 183213 |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Weight | 3.0 kg |
| Placement on Vehicle | Rear Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.95
Important compatibility info
| Weight | 1.52 kg |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23457)
- 1x Febi Water Pump, engine cooling (17507)
£98.95
Important compatibility info
| Material | Cast Iron |
| Function | Brake Caliper |
| Paired article numbers | 181364 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Weight | 2.780 kg |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Brake caliper piston diameter | 38 mm |
| Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.02
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Weight | 2.780 kg |
| Additional Information | with electric motor |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 181363 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.02
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Thickness | 34.3 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 28 mm |
| Centering Diameter | 71 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Outer diameter | 340 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Brake Disc Thickness | 30 mm |
| Weight | 10.58 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.02
Important compatibility info
| Thickness | 258 mm. 60 mm |
| Outer diameter | 191 mm. 258 mm |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Weight | 8.7 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.09
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1.2 kW |
| Weight | 3.162 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.09
Important compatibility info
| Additional Information 2 | with bearing |
| Additional Information | with kingpin |
| Outer diameter | 54 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 5.1 kg |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15864)
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15859)
- 1x Febi Bush, steering knuckle (15860)
£99.11
Important compatibility info
| Number of Connectors / Ports | 12 |
| Weight | 0.135 kg |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.12
Important compatibility info
| Length | 772 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Cone Size | 28.9 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
| Weight | 7.08 kg |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.17
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Function | Water Pump, engine cooling |
| Number of Wings | 6 |
| Weight | 2.21 kg |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.21
Important compatibility info
| Length | 197 mm |
| Height | 140 mm |
| Material | Rubber/Metal |
| Inner diameter | 12 mm |
| Function | Bushing, leaf spring |
| Weight | 8.164 kg |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.27
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.550 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 3Q0 199 262 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.31
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 225 mm. 155 mm |
| Thickness | 340 mm |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Weight | 10.5 kg |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.33
Important compatibility info
| Weight | 11.42 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 336 mm |
| Thickness | 52 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.35
Important compatibility info
| External Teeth, Wheel Side | 25 |
| Additional Information 2 | with nut |
| External Teeth, Diff.Side | 22 |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 193515 |
| Additional Information | with axle nut |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 651 mm |
| Weight | 5.22 kg |
£99.38
Important compatibility info
| Type | Camshaft |
| for OE number | 1 386 533 |
| Weight | 1.789 kg |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.39
Important compatibility info
| Weight | 11.1 kg |
| Surface | Coated |
| Centering Diameter | 68 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 26 mm |
| Brake Disc Thickness | 28 mm |
| Thickness | 53.7 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Rim Hole Number | 6 -Hole |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.43
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Colour | Green |
| Function | Stabiliser Bar, suspension |
| Stabiliser Diameter | 22.5 mm |
| Type | Stabiliser Bar, suspension |
| Weight | 4.773 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.44
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 10.64 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.44
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 2 |
| Rated Power | 300 W |
| Weight | 2.14 kg |
| Number of Wings | 7 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.46
Important compatibility info
| Weight | 0.56 kg |
| Width | 24 mm |
| Number of Teeth | 82 |
| Surface | Coated |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (43483)
- 1x Febi Tensioner Pulley, timing belt (30221)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
£99.50
Important compatibility info
| Weight | 1.46 kg |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 105 mm |
| Placement on Vehicle | Rear |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26294)
- 1x Febi Assembly Kit, propshaft joint (43515)
£99.55
Important compatibility info
| Weight | 0.100 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, engine oil level |
| Function | Sensor, engine oil level |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
| Replaces | 40787 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.55
Important compatibility info
| Number of Wings | 12 |
| Seal Material | Rubber |
| Water pump impeller material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Weight | 10.1 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.56
Important compatibility info
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Outer diameter | 276 mm |
| Number of Connectors / Ports | 4 |
| Weight | 9.5 kg |
| Operating Pressure | 15 bar |
| Internal Thread Size | M22 x 1,5 |
| Length | 578 mm |
| Material | Steel |
| Capacity | 30 l |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.59
Important compatibility info
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
| Weight | 3.0 kg |
| Paired article numbers | 183210 |
| Brake caliper piston diameter | 41 mm |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.60
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 49.7 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Weight | 10.6 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.61
Important compatibility info
| Length | 384 mm |
| Filter type | with water separator, without filter heating |
| Weight | 1.9 kg |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hand Feed Pump (176223)
- 1x Febi Fuel filter (29454)
- 1x Febi Water Separator, fuel system (103284)
£99.65
Important compatibility info
| for OE number | 11 37 542 27R |
| Placement on Vehicle | Right |
| Weight | 1.710 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.66
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Weight | 2.524 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.66
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with crown nut |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| External Thread Size | M16 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179167 |
| Weight | 7.954 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.69
Important compatibility info
| Weight | 0.150 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
| for OE number | 39310-02200 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.71
Important compatibility info
| Weight | 8.00 kg |
| Placement on Vehicle | Front Axle |
| Length | 888 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 0.001 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 548 mm |
| ABS Ring Diameter | 82 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 93.7 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower Front Axle, Left |
| Weight | 2.17 kg |
| Paired article numbers | 40306 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21739)
- 1x Febi Screw (36678)
- 1x Febi Nut (34653)
- 1x Febi Nut (38356)
£99.73
Important compatibility info
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Outer diameter | 70 mm |
| Weight | 0.900 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Material | Aluminium |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Weight | 3.9 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Weight | 0.200 kg |
| Internal Thread Size | M14 x 1,5 |
| Length | 160 mm |
| Width | 47 mm. 65 mm |
| Colour | Black |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 4 |
| Function | Gear Shift Lever Knob |
| Type | Gear Shift Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Length | 1920 mm |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt Set |
| Weight | 2.801 kg |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Units / Pulleys | incl. deflection pulley |
| Number of Deflection Rollers | 2 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Deflection/Guide Pulley, v-ribbed belt (30389)
- 1x Febi Belt Tensioner, v-ribbed belt (27135)
- 1x Febi V-Ribbed Belt (34136)
£99.73
Important compatibility info
| Weight | 3.720 kg |
| Outer diameter | 185 mm |
| Thickness | 35 mm |
| Inner diameter | 31 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 142 |
| Timing Chain Size | Z53H |
| Function | Timing Chain |
| Weight | 0.623 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Extra Description | ProKit |
| Function | Joint, propshaft |
| Weight | 0.97 kg |
| Type | Joint, propshaft |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (23144)
- 3x Febi Screw (43594)
- 3x Febi Screw (43417)
- 6x Febi Nut (43418)
- 6x Febi Washer (43419)
£99.73
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 96 |
| Function | Timing Chain Kit |
| Weight | 0.763 kg |
| Type | Timing Chain Kit |
| for OE number | 55495936 S1 |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (106641)
- 1x Febi Tensioner, timing chain (106688)
- 1x Febi Guide, timing chain (106644)
- 1x Febi Guide, timing chain (106642)
- 1x Febi Guide, timing chain (106709)
£99.73
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Outer diameter | 188 mm |
| Inner diameter | 176 mm |
| Weight | 1.9 kg |
| Number of Teeth, ABS ring | 100 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Max. Length | 338 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 79 mm. 42 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| External Thread Size | M14 x 1,5 |
| Weight | 4.53 kg |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Weight | 0.879 kg |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 134 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40398)
- 1x Febi Tensioner, timing chain (36298)
- 1x Febi Guide, timing chain (108914)
- 1x Febi Guide, timing chain (108915)
£99.73
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023