Important compatibility info
Lambda Sensor | Heated |
Placement on Vehicle | before catalytic converter |
Number of Connectors / Ports | 4 |
Weight | 0.092 kg |
Function | Oxygen Sensor |
Type | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Diff.Side | 24 |
Min. Length | 625 mm |
Weight | 6.752 kg |
External Teeth, Wheel Side | 30 |
Thread Size | M22x1,5 |
Additional Information 2 | with nut |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Wheel Sided Joint Diameter | 90 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M10x1,5 |
Paired article numbers | 182444 |
External Teeth, Wheel Side | 36 |
Weight | 8.441 kg |
External Teeth, Diff.Side | 26 |
Min. Length | 918 mm |
Wheel Sided Joint Diameter | 88 mm |
Transmission-side joint diameter | 84 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Number of Connectors / Ports | 2 |
Cable Length | 330 mm |
Function | Sensor, exhaust gas temperature |
Weight | 0.050 kg |
Type | Sensor, exhaust gas temperature |
Placement on Vehicle | behind exhaust turbocharger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.945 kg |
Colour | Black |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
Heating / Cooling | with jiggle pin |
Additional Information | with gasket/seal |
Placement on Vehicle | for cylinder 1-3 |
Paired article numbers | 185898 |
Material | Plastic |
Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Weight | 1.974 kg |
Paired article numbers | 176756 |
Type | Splash Guard, brake disc |
Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 4 |
Pulleys | with belt pulley |
Alternator Charge Current | 65 A |
Belt Pulley Diameter | 54 mm |
Weight | 4.13 kg |
Current Strength | 65 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Starter |
Type | Starter |
Voltage | 12 V |
Weight | 4.75 kg |
Rated Power | 2.3 kW |
Number of Teeth | 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Type | Cylinder Head Cover |
Colour | Black |
Weight | 1.829 kg |
for OE number | 11 12 7 568 581 |
Function | Cylinder Head Cover |
Additional Information | with gasket/seal |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M12 x 1,5 |
Weight | 0.34 kg |
Function | Pressure Limiting Valve |
Inlet pressure from | 8 bar |
Type | Pressure Limiting Valve |
Opening Pressure | 0.3 bar |
Inner thread 1 | M12 x 1,5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.0 kg |
Placement on Vehicle | Front Axle |
Width | 40 mm |
Outer diameter | 147 mm |
Inner diameter | 90 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Type | Tapered Roller Bearing |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Wheel Bearing (07910)
- 1x Febi Seal Ring, wheel hub (09827)
- 1x Febi Shaft Seal, wheel bearing (18200)
- 1x Febi Shaft Seal, wheel bearing (18201)
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Vehicle Equipment | for vehicles without start-stop function |
Rated Power | 0.8 kW |
Weight | 4.5 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.68 kg |
Type | Multiport Valve |
Function | Multiport Valve |
Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.818 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, manual transmission |
Function | Mounting, manual transmission |
Placement on Vehicle | Rear, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information | with Split Pin |
Additional Information 2 | with nut |
Thread Size | M24x2,0 |
External Teeth, Wheel Side | 28 |
Weight | 8.264 kg |
External Teeth, Diff.Side | 36 |
Min. Length | 799 mm |
Wheel Sided Joint Diameter | 91 mm |
Transmission-side joint diameter | 92 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Centering Diameter | 185 mm |
Thickness | 129 mm |
Brake Disc Thickness | 32 mm |
Brake Disc Type | Internally Vented |
Weight | 18.7 kg |
Surface | Coated |
Minimum thickness | 29 mm |
Placement on Vehicle | Rear Axle |
Rim Hole Number | 6 -Hole |
Outer diameter | 330 mm |
Bolt Hole Circle Diameter | 245 mm |
Additional Information 2 | with ABS sensor ring |
Function | Brake Disc |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 86 mm |
Weight | 2.1 kg |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 39 mm |
Type | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 206 mm |
Width | 155 mm |
Thickness | 92 mm |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.537 kg |
Additional Information | with gasket/seal |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 19 mm |
External Thread Size | M16 x 1,5 |
Weight | 2.8302 kg |
Placement on Vehicle | Front Axle Right, Lower, Front |
Material | Aluminium |
Inner diameter | 14 mm |
Steering arm type | Control Arm |
Paired article numbers | 38271 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with hydro mount, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (38393)
- 1x Febi Nut (39976)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023