Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Air Dryer, compressed-air system |
| Type | Air Dryer, compressed-air system |
| Voltage | 24 V |
| Additional Information 2 | with dryer, with integrated oil separator |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.63
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Actuator, central locking system |
| Extra Description | febi Plus |
| Type | Actuator, central locking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Hole Spacing | 115 mm |
| Placement on Vehicle | Rear Axle |
| Length | 666 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Number of Teeth | 39 |
| Type | Gear, air compressor |
| Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Number of mounting bores | 6 |
| Bolt Hole Circle Diameter | 86 mm |
| Thread Size | M27x1,5 |
| Bore Diameter | 10.5 mm |
| Min. Length | 682 mm |
| ABS Ring Diameter | 83 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Length | 1130 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28926)
- 1x Febi Belt Tensioner, v-ribbed belt (27835)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (47861)
£108.64
Important compatibility info
| Additional Information | with gaskets/seals |
| Number of Connectors / Ports | 5 |
| for OE number | 77 01 209 370 S1 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Type | Wiper Linkage |
| Function | Wiper Linkage |
| Extra Description | febi Plus |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05040 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| External Teeth, Diff.Side | 24 |
| Min. Length | 870 mm |
| Wheel Sided Joint Diameter | 86.1 mm |
| Transmission-side joint diameter | 80.4 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Pipe Diameter | 48 mm |
| Type | Tie Rod |
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Function | Tie Rod |
| Length | 1675 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Extra Description | febi Plus |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 2. 10 |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.65
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| for OE number | 961 241 72 13 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.65
Important compatibility info
| Outer diameter | 280 mm. 155 mm |
| Placement on Vehicle | Rear Axle |
| Function | Bellow, air suspension |
| Thickness | 248 mm. 155 mm |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.67
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 43010 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.67
Important compatibility info
| Extra Description | febi Plus |
| Function | Fitting, intake manifold |
| Type | Fitting, intake manifold |
| Additional Information | with gasket/seal, without adjusting element |
| Additional Information 2 | with bolts/screws |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.67
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 193516 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 613 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.71
Important compatibility info
| Length | 222 mm |
| Width | 44 mm |
| Outer diameter | 73 mm |
| Thickness | 142 mm |
| Inner diameter | 47 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.72
Important compatibility info
| Units / Pulleys | incl. deflection pulley |
| Additional Information | with belt tensioner for V-ribbed belt |
| Function | V-Ribbed Belt Set |
| Number of Ribs | 8 |
| Length | 1635 mm |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Deflection/Guide Pulley, v-ribbed belt (30389)
- 1x Febi Belt Tensioner, v-ribbed belt (27135)
- 1x Febi V-Ribbed Belt (35508)
£108.73
Important compatibility info
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.75
Important compatibility info
| Thickness | 140 mm. 525 mm |
| Additional Information | with piston |
| Outer diameter | 286 mm. 260 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M12 x 1,75, M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.76
Important compatibility info
| Length | 190 mm |
| Height | 160 mm |
| Width | 150 mm |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.78
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Piston conrod diameter | 16 mm |
| Mounting points diameter | 16 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Max. Length | 774 mm |
| Min. Length | 475 mm |
| Replaces | 20037 |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.80
Important compatibility info
| Thickness | 86.2 mm |
| Brake Disc Thickness | 11 mm |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Function | Brake Disc |
| Surface | Oiled |
| Minimum thickness | 9.5 mm |
| Outer diameter | 274 mm |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring, with grease cap |
| Bolt Hole Circle Diameter | 114 mm |
| Centering Diameter | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.81
Important compatibility info
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Thickness | 485 mm. 152 mm |
| Function | Bellow, air suspension |
| Outer diameter | 228 mm. 170 mm |
| Placement on Vehicle | non-steered trailing axle |
| Extra Description | febi Plus |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.84
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.94
Important compatibility info
| Mounting points diameter | 19 mm |
| Hole Spacing | 115 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 569 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 46 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.98
Important compatibility info
| Internal Thread Size | 1 x M26 x 1,5, 3 x M16 x 1,5 |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Pressure | 180 bar |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| for OE number | 002 460 08 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.98
Important compatibility info
| Width | 50 mm |
| Type | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bolt Hole Circle Diameter | 180 mm |
| Inner diameter | 30 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter | 87.5 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.98
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023