Important compatibility info
Type | Timing Chain |
Number of Chain Links | 110 |
Timing Chain Size | G67HR-6 |
Function | Timing Chain |
Chain Type | Simplex, Closed chain |
Weight | 0.555 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.11 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 228 mm. 218 mm |
Thickness | 160 mm. 370 mm |
Function | Bellow, air suspension |
External Thread Size | M14 x 1,5 |
Type | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 80 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.73 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Width of castor bearing surface | 28.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Water Pump, engine cooling |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Weight | 1.25 kg |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.199 kg |
Number of Connectors / Ports | 6 |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Housing Type | with housing |
Type | Mass Air Flow Sensor |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 80 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.31 kg |
Width of castor bearing surface | 29 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Resistor Type | Hot-film Sensor |
Function | Mass Air Flow Sensor |
Type | Mass Air Flow Sensor |
for OE number | 651 090 01 48 |
Number of Connectors / Ports | 4 |
Weight | 0.194 kg |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 50 mm |
Cone Size | 30 mm |
Weight | 14.1 kg |
Length | 1680 mm |
Placement on Vehicle | Front Axle |
Function | Tie Rod |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 LHT |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 6 |
Alternator Charge Current | 90 A |
Belt Pulley Diameter | 56 mm |
Weight | 5.5 kg |
Function | Alternator |
Type | Alternator |
Voltage | 12 V |
Pulleys | with belt pulley |
for OE number | 5705.FX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Rated Power | 1.2 kW |
Weight | 3.162 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 11.1 kg |
Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
Length | 953 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 52 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information | with castellated nut and split pins |
Internal Thread Size | M38 x 1,5 LHT |
External Thread Size | M24 x 1,5 |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.32 kg |
Placement on Vehicle | Front Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 108820 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lids |
Weight | 2.393 kg |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Pipe Diameter | 50 mm |
Cone Size | 31.5 mm |
Driver Position | for right-hand drive vehicles |
Outer diameter | 50 mm |
Placement on Vehicle | Front Axle |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Weight | 14.5 kg |
Extra Description | ProKit |
Rod/Strut | Push Rod |
Length | 1822 mm |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 30 mm |
Pipe Diameter | 40 mm |
Length | 1580 mm |
Weight | 10.37 kg |
Placement on Vehicle | Front Axle |
Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
Function | Tie Rod |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Weight | 7.7 kg |
Function | Centre Rod Assembly |
Pipe Diameter | 50 mm |
Cone Size | 26 mm |
Rod/Strut | Push Rod |
Outer diameter | 40 mm |
Length | 857 mm |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Extra Description | febi Plus |
Weight | 0.358 kg |
Type | Valve, crankcase ventilation |
Function | Valve, crankcase ventilation |
for OE number | 11 61 7 501 566 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (26100)
- 1x Febi Hose, crankcase ventilation (46301)
- 1x Febi Hose, crankcase ventilation (47223)
- 1x Febi Hose, crankcase ventilation (36680)
- 1x Febi Hose, crankcase ventilation (33113)
Important compatibility info
Type | Multi-Function Switch |
Function | Multi-Function Switch |
Placement on Vehicle | Driver side |
Number of Connectors / Ports | 12 |
Combi Switch Function | Window Regulator, Heated wing mirror on/off |
Weight | 0.122 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.956 kg |
Inner length 1 | 778 mm |
Inner length 2 | 798 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Outer length 1 | 1112 mm |
Outer length 2 | 1139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Push Rod |
Additional Information 2 | with crown nut |
Length | 824 mm |
Cone Size | 28.6 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 50 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Weight | 8.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023