Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 222 mm |
| Width | 44 mm |
| Outer diameter | 73 mm |
| Thickness | 140 mm |
| Inner diameter | 47 mm |
| Function | Suspension, propshaft |
| Weight | 1.045 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.06
Important compatibility info
| Weight | 1.172 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 755 mm |
| Inner length 2 | 715 mm |
| Outer length 1 | 1083 mm |
| Outer length 2 | 987 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.07
Important compatibility info
| Mounting points diameter | 20 mm |
| Pipe Diameter | 45 mm |
| Max. Length | 373 mm |
| Weight | 4.7 kg |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Min. Length | 430 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.07
Important compatibility info
| Number of Teeth | 136 |
| Weight | 2.01 kg |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11222)
- 1x Febi Water Pump, engine cooling (24185)
£96.11
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 137 |
| for OE number | 028 198 119 C S2 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 2.07 kg |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (01287)
- 1x Febi Timing Belt Kit (14626)
£96.11
Important compatibility info
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Machining | High-carbon |
| Number of mounting bores | 1 |
| Weight | 12.0 kg |
| Surface | Coated |
| Centering Diameter | 79 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 32 mm |
| Thickness | 62 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 349 mm |
| Brake Disc Thickness | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.13
Important compatibility info
| Additional Information | with drive rods |
| Weight | 0.610 kg |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (34722)
- 1x Febi Drive Shaft, oil pump (34785)
- 1x Febi Drive Shaft, oil pump (34786)
£96.13
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 96 mm |
| External Teeth, Wheel Side | 28 |
| Weight | 7.702 kg |
| Number of mounting bores | 6 |
| Min. Length | 470 mm |
| Wheel Sided Joint Diameter | 100.4 mm |
| Transmission-side joint diameter | 112 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.23
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 980 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 10.910 kg |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.27
Important compatibility info
| for OE number | 967 241 10 13 |
| Placement on Vehicle | Rear, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 2.500 kg |
| Type | Mounting, engine |
| Replaces | 108061 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.31
Important compatibility info
| Machining | High-carbon |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 315 mm |
| Thickness | 76 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Weight | 9.14 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.34
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 5.069 kg |
| Internal Thread Size | M16 x 1,5, M18 x 1,5 |
| for OE number | 961 241 63 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.35
Important compatibility info
| Weight | 2.415 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.39
Important compatibility info
| Min. Length | 629 mm |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 84 mm |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 27 |
| Weight | 6.046 kg |
| Type | Drive Shaft |
| Transmission-side joint diameter | 80.4 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.46
Important compatibility info
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M16 x 1,5 |
| Inner diameter | 15 mm |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Weight | 1.622 kg |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.48
Important compatibility info
| Weight | 0.9 kg |
| Type | Stub Shaft, differential |
| Function | Stub Shaft, differential |
| Additional Information 2 | with screw |
| Placement on Vehicle | transmission sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stub Shaft, differential (39890)
- 1x Febi Screw (45930)
£96.53
Important compatibility info
| Weight | 13.400 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm. 260 mm |
| Thickness | 420 mm. 178 mm |
| Function | Bellow, air suspension |
| External Thread Size | M14 x 1,5, M10 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.53
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 31297 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 9.26 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.55
Important compatibility info
| Weight | 9.26 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 31298 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.55
Important compatibility info
| Weight | 0.281 kg |
| Length | 105 mm |
| Spanner Size | 36 |
| Voltage | 21 V |
| External Thread Size | M32 x 1,5 |
| Function | Glow Plug |
| Type | Glow Plug |
| Number of Connectors / Ports | 2 |
| Glow Plug Type | Flame Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.56
Important compatibility info
| Combi Switch Function | with wipe-wash function, with indicator function, with light dimmer function |
| Number of Connectors / Ports | 8 |
| Weight | 0.230 kg |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.56
Important compatibility info
| Weight | 0.133 kg |
| Width | 360 mm |
| Inner diameter 1 | 10 mm |
| Inner diameter 2 | 5 mm |
| not suited for fuel type | Ethanol Blended Petrol (E10) |
| Function | Fuel Hose |
| Length | 750 mm |
| Height | 170 mm |
| Type | Fuel Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.57
Important compatibility info
| Extra Description | febi Plus |
| Function | Connecting Cable, injector |
| Type | Connecting Cable, injector |
| Weight | 0.260 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.58
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 8.030 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 912 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 79.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.59
Important compatibility info
| Weight | 2.0 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 508 mm |
| Min. Length | 318 mm |
| Pipe Diameter | 51 mm. 44 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.60
Important compatibility info
| Function | Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 14 mm |
| Placement on Vehicle | Front Axle |
| Pipe Diameter | 60 mm. 51 mm |
| Mounting points diameter | 24 mm |
| External Thread Size | M14 x 1,5 |
| Weight | 4.02 kg |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 844 mm |
| Min. Length | 515 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.60
Important compatibility info
| Weight | 10.160 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 265 mm |
| Thickness | 82 mm |
| Brake Disc Thickness | 35 mm |
| Inner diameter | 108 mm |
| Minimum thickness | 33 mm |
| Bolt Hole Circle Diameter | 142 mm |
| Centering Diameter | 104 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 6 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.61
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm |
| Thickness | 95.5 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Surface | Coated |
| Mounting points diameter | 15 mm |
| Function | Brake Disc |
| Weight | 6.0 kg |
| Type | Brake Disc Rotor |
| Replaces | 36195 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.63
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Function | Alternator |
| Type | Alternator |
| Weight | 5.8 kg |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 50 mm |
| for OE number | 038 903 018 R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.63
Important compatibility info
| Type | Solenoid Valve, retarder |
| Function | Solenoid Valve, retarder |
| Weight | 0.53 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.65
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023