Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 4 |
| Weight | 0.17 kg |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.02
Important compatibility info
| Weight | 0.394 kg |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 116 |
| Width | 16 mm |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47946)
- 1x Febi Toothed Belt, power take-off (49234)
- 1x Febi Tensioner Pulley, timing belt (100320)
- 1x Febi Bolt, tensioner pulley (196873)
£103.02
Important compatibility info
| Additional Information | with piston |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Thickness | 370 mm. 146 mm |
| External Thread Size | M20 x 2,5, M14 x 1,5, M12 x 1,75 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm. 258 mm |
| Weight | 11.7 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.05
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 181902 |
| External Teeth, Wheel Side | 29 |
| Weight | 10.358 kg |
| External Teeth, Diff.Side | 39 |
| Min. Length | 1016 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 91.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.06
Important compatibility info
| Number of Teeth | 116 |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Weight | 1.531 kg |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Replaces | 104948 |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (103080)
- 1x Febi Water Pump, engine cooling (39304)
£103.07
Important compatibility info
| Material | Plastic |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Weight | 0.14 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.GG |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.08
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 183228 |
| Weight | 2.9 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.12
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | both sides |
| Weight | 1.261 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.15
Important compatibility info
| Weight | 0.498 kg |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.17
Important compatibility info
| Weight | 8.7 kg |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 568 mm |
| Steering arm type | Trailing Arm |
| Paired article numbers | 39693 |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.17
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Material | Steel |
| Outer diameter | 396 mm |
| Number of Connectors / Ports | 4 |
| Weight | 15.0 kg |
| Capacity | 50 l |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Operating Pressure | 15 bar |
| Length | 498 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.18
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 375 mm |
| Thickness | 119 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 37 mm |
| Bolt Hole Circle Diameter | 142 mm |
| Surface | Coated |
| Function | Brake Disc |
| Weight | 24.240 kg |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.18
Important compatibility info
| Additional Information | with belt tensioner for V-ribbed belt |
| Length | 1642 mm |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Weight | 0.928 kg |
| Number of Ribs | 6 |
| Units / Pulleys | incl. deflection pulley |
| Width | 21 mm |
| Operating Mode | Automatic |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (39793)
- 1x Febi Belt Tensioner, v-ribbed belt (45554)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (100154)
£103.21
Important compatibility info
| Paired article numbers | 104660 |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Weight | 2.594 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.24
Important compatibility info
| Weight | 1.719 kg |
| Inner diameter | 19 mm |
| Outer diameter | 135 mm |
| Width | 135 mm |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Parameter | 6PK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.28
Important compatibility info
| Belts | with rounded tooth profile |
| Water pump impeller material | Plastic |
| Width | 24 mm |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 1.660 kg |
| Number of Teeth | 146 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (27825)
- 1x Febi Water Pump, engine cooling (28531)
£103.31
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Weight | 0.166 kg |
| Filter type | Filter Insert |
| Outer diameter | 313 mm |
| Height | 207 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.34
Important compatibility info
| Belts | with rounded tooth profile |
| Track rollers material | Plastic |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Weight | 0.053 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19943)
- 1x Febi Tensioner Pulley, timing belt (19846)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (19847)
£103.34
Important compatibility info
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 46.6 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 11.785 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.40
Important compatibility info
| Weight | 10.0 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 318 mm |
| Thickness | 57.2 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.40
Important compatibility info
| Rotor Style | Solid |
| Weight | 5.11 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 249 mm |
| Thickness | 67.2 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.4 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.41
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 2.824 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.44
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Weight | 1.2 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.45
Important compatibility info
| Weight | 9.94 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 46.4 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.47
Important compatibility info
| Rolling piston material | Plastic |
| Placement on Vehicle | Rear Axle |
| Additional Information | with piston |
| Function | Bellow, air suspension |
| External Thread Size | M12 x 1,75, M20 x 1,5, M12 x 1,5 |
| Type | Bellow, air suspension |
| Outer diameter | 228 mm. 260 mm |
| Thickness | 239 mm. 516 mm |
| Weight | 6.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.48
Important compatibility info
| Weight | 1.416 kg |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.57
Important compatibility info
| Function | Bellow, air suspension |
| Weight | 13.6 kg |
| Rolling piston material | Plastic |
| External Thread Size | M22 x 1,5, M12 x 1,75, M16 x |
| Type | Bellow, air suspension |
| Outer diameter | 310 mm. 250 mm |
| Thickness | 715 mm. 415 mm |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.57
Important compatibility info
| Weight | 0.69 kg |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
| Additional Information 2 | with coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Alternator Freewheel Clutch (26958)
- 1x Febi Flexible Coupling Sleeve (30798)
£103.59
Important compatibility info
| Weight | 0.13 kg |
| Type | Pressure Converter |
| Operating Mode | Electric-pneumatic |
| Extra Description | febi Plus |
| Function | Pressure Converter |
| for OE number | 55206832 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.59
Important compatibility info
| Piston Diameter | 22 mm |
| Weight | 2.730 kg |
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Outer diameter | 230 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.60
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.870 kg |
| Placement on Vehicle | Right |
| for OE number | 11 21 063 87R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.60
Important compatibility info
| Material | Plastic |
| Weight | 1.48 kg |
| Type | Washer Fluid Reservoir, window cleaning |
| Function | Washer Fluid Reservoir, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.65
Important compatibility info
| Function | Bellow, air suspension |
| Weight | 6.5 kg |
| Outer diameter | 227 mm. 190 mm |
| Thickness | 272 mm. 525 mm |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.65
Important compatibility info
| Weight | 4.265 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 34647 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information 2 | with ball joint, with rubber mount |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21467)
£103.67
Important compatibility info
| Weight | 6.474 kg |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
| Length | 989 mm |
| Width | 69 mm |
| Thickness | 128 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 32 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M24 x 1,5 RHT |
| External Thread Size | M24 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Length | 310 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Weight | 1.504 kg |
| Type | Interior Blower |
| for OE number | 001 830 87 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 275 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Outer diameter | 330 mm |
| Thickness | 141 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Function | Brake Disc |
| Surface | Coated |
| Number of Holes | 8 |
| Weight | 23.2 kg |
| Additional Information 2 | with ABS sensor ring |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Voltage | 12 V |
| Function | Starter |
| Rated Power | 1.7 kW |
| Number of Teeth | 11 |
| Type | Starter |
| Weight | 3.74 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Material | Plastic |
| Paired article numbers | 26942 |
| Colour | Black |
| Placement on Vehicle | Right |
| Function | Exterior Door Handle |
| Weight | 0.930 kg |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Weight | 0.507 kg |
| Number of Connectors / Ports | 22 |
| Combi Switch Function | with indicator function, with wipe-wash function, with hazard warning light function, with high beam function, with light dimmer function, with park light function |
| for OE number | 001 540 46 45 |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
| Vehicle Equipment 2 | for vehicles with indirect parking light control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Weight | 10.650 kg |
| Length | 895 mm |
| Additional Information 2 | with crown nut |
| Cone Size | 28.8 mm |
| Adjustable | Adjustable on one side |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| External Teeth, Wheel Side | 38 |
| Thread Size | M20x1,5 |
| Additional Information 2 | with screw, with cap |
| Placement on Vehicle | Front Axle Right |
| Weight | 10.368 kg |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 109.9 mm |
| Wheel Sided Joint Diameter | 111.4 mm |
| External Teeth, Diff.Side | 26 |
| Min. Length | 867 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Number of Teeth, ABS ring | 29 |
| Weight | 2.10 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 59.2 mm |
| Outer diameter | 129 mm |
| Inner diameter | 25 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Weight | 0.713 kg |
| Belts | with rounded tooth profile |
| Width | 23 mm |
| Number of Teeth | 150 |
| Surface | Coated |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19546)
- 1x Febi Tensioner Pulley, timing belt (38654)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (19292)
£103.69
Important compatibility info
| Weight | 2.94 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Pneumatic |
| Placement on Vehicle | Front |
| Min. Length | 284 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 44 mm. 53 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M10 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 194 mm |
| Outer diameter | 42 mm. 43 mm |
| Function | Repair Kit, kingpin |
| Weight | 3.300 kg |
| Additional Information | with Thrust Bearing |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (24773)
- 1x Febi Bush, kingpin (24776)
- 1x Febi Bush, steering knuckle (18986)
- 2x Febi Seal Ring, steering knuckle (18988)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Circlip (03729)
- 2x Febi Grease Nipple (01094)
- 1x Febi Spacer, kingpin (28069)
- 1x Febi Spacer, kingpin (28070)
- 1x Febi Spacer, kingpin (28071)
- 1x Febi Spacer, kingpin (28072)
- 1x Febi Spacer, kingpin (28073)
- 1x Febi Spacer, kingpin (28074)
- 1x Febi Spacer, kingpin (28075)
- 1x Febi Spacer, kingpin (28076)
- 1x Febi Bush, steering knuckle (18997)
- 2x Febi Sealing/Protective Cap (08522)
£103.69
Important compatibility info
| Height | 39 mm |
| Width | 39 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 173 mm |
| Type | Repair Kit, kingpin |
| Weight | 1.800 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (109533)
- 1x Febi Bush, kingpin (108227)
- 2x Febi Lock Ring, steering knuckle (109458)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (108376)
- 2x Febi Lock Ring, steering knuckle (109459)
- 2x Febi Circlip, kingpin (10553)
- 1x Febi Spacer, kingpin (46072)
- 1x Febi Spacer, kingpin (46073)
- 1x Febi Spacer, kingpin (46074)
- 1x Febi Spacer, kingpin (46075)
- 1x Febi Spacer, kingpin (46076)
- 1x Febi Spacer, kingpin (46077)
- 1x Febi Spacer, kingpin (46078)
- 1x Febi Spacer, kingpin (46079)
- 1x Febi Spacer, kingpin (46080)
- 1x Febi Bush, steering knuckle (107408)
- 1x Febi Seal Ring, steering knuckle (46071)
£103.69
Important compatibility info
| Inner diameter | 20 mm |
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Mounting points diameter | 8.5 mm |
| Number of mounting bores | 2 |
| Weight | 1.855 kg |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Operating pressure to | 10 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Weight | 1.284 kg |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 714 mm |
| Outer length 1 | 993 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 139 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 1.359 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (39200)
- 1x Febi Water Pump, engine cooling (21856)
£103.69
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023