Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 225 mm. 575 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| External Thread Size | M12 x 1,75, M22 x 1,5, M12 x 1,5 |
| Axle | Lift Axle |
| Outer diameter | 257 mm. 200 mm |
| Additional Information | with piston |
| Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.06
Important compatibility info
| Material | Plastic |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.GG |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.08
Important compatibility info
| Material | Plastic |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.10
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40281 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (05271)
- 1x Febi Nut (06877)
- 2x Febi Camber Correction Screw (07752)
- 1x Febi Screw (31032)
- 2x Febi Washer (01965)
- 1x Febi Nut (22263)
- 2x Febi Nut (10358)
£103.11
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 183228 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.12
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.17
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 274 mm |
| Thickness | 82.3 mm |
| Brake Disc Thickness | 10.9 mm |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.18
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Machining | High-carbon |
| Surface | Coated |
| Centering Diameter | 63 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Brake Disc Thickness | 25 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 350 mm |
| Minimum thickness | 23 mm |
| Thickness | 48.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.19
Important compatibility info
| Additional Information | with belt tensioner for V-ribbed belt |
| Length | 1642 mm |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Number of Ribs | 6 |
| Units / Pulleys | incl. deflection pulley |
| Width | 21 mm |
| Operating Mode | Automatic |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (39793)
- 1x Febi Belt Tensioner, v-ribbed belt (45554)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (100154)
£103.21
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M29x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 864 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.22
Important compatibility info
| Additional Information 2 | with switch, with bolts/screws |
| Type | Steering Lock |
| Function | Steering Lock |
| Lock System | with two keys, with lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.25
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with piston |
| Outer diameter | 259 mm. 175 mm |
| Thickness | 130 mm. 520 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M16 x 1,5, M12 x 1,5, M18 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.25
Important compatibility info
| Operating Mode | Automatic |
| Outer diameter | 65 mm |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Vibration | with vibration absorber |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.27
Important compatibility info
| External Thread Size | M10 x 1,5, M22 x 1,5 |
| Outer diameter | 228 mm. 242 mm |
| Thickness | 125 mm. 515 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Axle | Lift Axle |
| Additional Information | with piston |
| Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.27
Important compatibility info
| Placement on Vehicle | both sides, Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 2 611 113 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.27
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 6 |
| for OE number | 13 62 7 585 680 |
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.28
Important compatibility info
| Width | 41.5 mm |
| Outer diameter | 55 mm |
| Function | Tensioner Pulley, timing belt |
| Additional Information 2 | with screw |
| Type | Tensioner Pulley, timing belt |
| Additional Information | with spring |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, tensioner pulley (31844)
- 1x Febi Tension Spring, tensioner pulley (timing belt) (31828)
- 1x Febi Tensioner Pulley, timing belt (31310)
£103.31
Important compatibility info
| Belts | with rounded tooth profile |
| Water pump impeller material | Plastic |
| Width | 24 mm |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Number of Teeth | 146 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (27825)
- 1x Febi Water Pump, engine cooling (28531)
£103.31
Important compatibility info
| Belts | with rounded tooth profile |
| Track rollers material | Plastic |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19943)
- 1x Febi Tensioner Pulley, timing belt (19846)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (19847)
£103.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Length | 330 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Cone Size | 36 mm |
| Pipe Diameter | 36 mm |
| Mounting points diameter | 15 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 80 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.36
Important compatibility info
| Outer diameter | 380 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 180 mm |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle, Front Axle |
| Internal Thread Size | M18 x 1,5 |
| Rim Hole Number | 8 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.51
Important compatibility info
| Number of Connectors / Ports | 6 |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.54
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 26655 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material, with holder |
| Additional Information 2 | with ball joint, with bearing |
| Additionally Required Parts | 31 10 6 772 199, 7 12 9 906 196, 31 10 6 757 145 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (26642)
- 1x Febi Mounting, control/trailing arm (18688)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
£103.64
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
| for OE number | 403 200 77 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.65
Important compatibility info
| Type | Solenoid Valve, retarder |
| Length | 90 mm |
| Thickness | 40 mm |
| Function | Solenoid Valve, retarder |
| Width | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.66
Important compatibility info
| Height | 211 mm |
| Type | Air Filter |
| Function | Air Filter |
| Width | 186 mm |
| Filter type | Filter Insert |
| Length | 486 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.66
Important compatibility info
| Type | Slave Cylinder, engine brake |
| Function | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 194 mm |
| Outer diameter | 42 mm. 43 mm |
| Function | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (24773)
- 1x Febi Bush, kingpin (24776)
- 1x Febi Bush, steering knuckle (18986)
- 2x Febi Seal Ring, steering knuckle (18988)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Circlip (03729)
- 2x Febi Grease Nipple (01094)
- 1x Febi Spacer, kingpin (28069)
- 1x Febi Spacer, kingpin (28070)
- 1x Febi Spacer, kingpin (28071)
- 1x Febi Spacer, kingpin (28072)
- 1x Febi Spacer, kingpin (28073)
- 1x Febi Spacer, kingpin (28074)
- 1x Febi Spacer, kingpin (28075)
- 1x Febi Spacer, kingpin (28076)
- 1x Febi Bush, steering knuckle (18997)
- 2x Febi Sealing/Protective Cap (08522)
£103.69
Important compatibility info
| Material | Plastic |
| Paired article numbers | 26942 |
| Colour | Black |
| Placement on Vehicle | Right |
| Function | Exterior Door Handle |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 576 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Function | Tilt Pump, driver cab |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Hole Spacing | 70 mm |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Length | 310 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
| for OE number | 001 830 87 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Voltage | 12 V |
| Function | Starter |
| Rated Power | 1.7 kW |
| Number of Teeth | 11 |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 148 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Height | 39 mm |
| Width | 39 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 173 mm |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (109533)
- 1x Febi Bush, kingpin (108227)
- 2x Febi Lock Ring, steering knuckle (109458)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (108376)
- 2x Febi Lock Ring, steering knuckle (109459)
- 2x Febi Circlip, kingpin (10553)
- 1x Febi Spacer, kingpin (46072)
- 1x Febi Spacer, kingpin (46073)
- 1x Febi Spacer, kingpin (46074)
- 1x Febi Spacer, kingpin (46075)
- 1x Febi Spacer, kingpin (46076)
- 1x Febi Spacer, kingpin (46077)
- 1x Febi Spacer, kingpin (46078)
- 1x Febi Spacer, kingpin (46079)
- 1x Febi Spacer, kingpin (46080)
- 1x Febi Bush, steering knuckle (107408)
- 1x Febi Seal Ring, steering knuckle (46071)
£103.69
Important compatibility info
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Belts | with rounded tooth profile |
| Width | 23 mm |
| Number of Teeth | 150 |
| Surface | Coated |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19546)
- 1x Febi Tensioner Pulley, timing belt (38654)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (19292)
£103.69
Important compatibility info
| Additional Information 2 | with integrated magnetic sensor ring |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 90 mm |
| Inner diameter | 45 mm |
| Outer diameter 2 | 87 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (101297)
- 4x Febi Screw (101133)
- 1x Febi Nut, kingpin (12181)
£103.69
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 54 |
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| for OE number | 03C 115 225 A S2 |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (40393)
- 1x Febi Chain Tensioner, oil pump drive (170307)
- 1x Febi Sprocket/Gear, oil pump (176277)
£103.69
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 714 mm |
| Outer length 1 | 993 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 25 mm |
| Steering arm type | Control Arm |
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 41732 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Length | 995 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| External Thread Size | M33 x 3,5 |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Length | 265 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (104470)
- 1x Febi Bush, kingpin (104182)
- 1x Febi Nut (107297)
- 1x Febi Spacer, kingpin (107308)
- 1x Febi Spacer, kingpin (107309)
- 1x Febi Spacer, kingpin (107310)
- 1x Febi Spacer, kingpin (107311)
- 1x Febi Spacer, kingpin (107314)
- 1x Febi Bush, steering knuckle (107270)
- 1x Febi Seal Ring, steering knuckle (170501)
- 1x Febi Bush, steering knuckle (170502)
- 1x Febi Seal Ring, steering knuckle (170574)
- 1x Febi Pressure Piece, kingpin (171958)
- 1x Febi Pressure Piece, kingpin (172736)
£103.69
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 150 |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 06B 198 119 A S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (24755)
- 1x Febi Water Pump, engine cooling (24358)
£103.70
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Number of Connectors / Ports | 1 |
| for OE number | 4G0 199 381 NF |
| Bearing/Mounting Type | electrically adjustable hydro mount |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NG (febi 180461 / SWAG 33 10 7686).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.71
Important compatibility info
| Number of Connectors / Ports | 6 |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.73
Important compatibility info
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Function | Spring-loaded Cylinder |
| Internal Thread Size | M16 x 1,5 |
| Brake Type | Disc Brake |
| Type | Spring-loaded Cylinder |
| Parameter | Typ 16 / 24 |
| Stroke | 64 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.74
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 37 |
| Min. Length | 951 mm |
| Wheel Sided Joint Diameter | 91.7 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.78
Important compatibility info
| Outer diameter | 95 mm |
| Length | 100 mm |
| Width | 20 mm |
| Inner diameter | 30 mm |
| Bearing Type | Cylindrical Roller Bearing |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Hole Spacing | 68 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.82
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1515 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.85
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023