Important compatibility info
| Housing material | Grey Cast Iron |
| Number of grooves | 12 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| for OE number | 5 0035 6553 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Inner Length | 606 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 690 mm |
| Outer diameter | 42 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 121 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 62 mm |
| Placement on Vehicle | Front Axle |
| Length | 845 mm |
| Width | 68 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M38 x 1,5 RHT |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 444 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 130 mm |
| Placement on Vehicle | Rear Axle |
| Length | 576 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 18 mm |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 379 mm |
| Min. Length | 334 mm |
| Operating Mode | Pneumatic |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 22 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| External Thread Size | M14 x 1,5 |
| Steering arm type | Control Arm |
| Paired article numbers | 175452 |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Paired article numbers | 175397 |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower |
| External Thread Size | M14 x 1,5 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Push Rod |
| Pipe Diameter | 46 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Cone Size | 28.6 mm |
| Length | 718 mm |
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Extra Description | febi Plus |
| Type | Release Fork, clutch |
| Function | Release Fork, clutch |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 1644 886 |
| Type | Fan Wheel, engine cooling |
| Function | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Max. Length | 272 mm |
| Min. Length | 222 mm |
| Pipe Diameter | 45 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,5 |
| Shock Absorber Mounting Type | Top pin, Bottom Yoke |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Width | 36 mm |
| Outer diameter | 145 mm |
| Type | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Additional Information 2 | with screw |
| Inner diameter | 51 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (174699)
- 1x Febi Screw (170620)
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Wheel Sided Joint Diameter | 72.7 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Drive Shaft |
| Transmission-side joint diameter | 72 mm |
| Min. Length | 748 mm |
| Thread Size | M10 x 1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 85 A |
| Belt Pulley Diameter | 48 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Length | 743 mm |
| Number of Connectors / Ports | 6 |
| Capacity | 40 l |
| Operating Pressure | 15 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 276 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 609 mm |
| Material | Steel |
| Outer diameter | 300 mm |
| Number of Connectors / Ports | 7 |
| Capacity | 36 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 62 mm |
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Length | 914 mm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with Temperature Switch |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 87 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Activated Carbon Filter, High efficiency air filter (HEPA) |
| Height | 31 mm |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Length | 1022 mm |
| Width | 318 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















