Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 4.6 kg |
| for OE number | 31400-60G13-000 |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 64.5 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Type | Wheel Bearing Kit |
| Weight | 3.303 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 27 mm |
| Outer diameter | 83 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Weight | 2.94 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Pneumatic |
| Placement on Vehicle | Front |
| Min. Length | 284 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 44 mm. 53 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M10 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 43020 |
| Cone Size | 20 mm |
| External Thread Size | M16 x 1,5 |
| Weight | 6.995 kg |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Suction side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Pressure side external thread size | M14 x 1,5 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Weight | 2.4 kg |
| Hole Spacing | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Additional Information 2 | with screw |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Weight | 7.632 kg |
| External Teeth, Wheel Side | 37 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 863 mm |
| Transmission-side joint diameter | 81 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Thread Size | M16x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Weight | 0.24 kg |
| Operating Mode | Hydraulic |
| Thickness | 54 mm |
| Function | Tensioner, timing belt |
| Outer diameter | 32 mm |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| for OE number | 28100-67052 |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Weight | 5.26 kg |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Additional Information | with gaskets/seals |
| Weight | 1.86 kg |
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Weight | 3.209 kg |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023