Proud to be a UK-based company
Contact us
Important compatibility info
| Housing material | Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Number of Connectors / Ports | 6 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 178869 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 178868 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 614 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 89.1 mm |
| Transmission-side joint diameter | 81.6 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Outer diameter | 198.5 mm |
| Inner diameter | 45 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.70
Important compatibility info
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 651 090 01 48 |
| Number of Connectors / Ports | 4 |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.70
Important compatibility info
| for OE number | 13506-26020 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 112 |
| Type | Timing Chain |
| Function | Timing Chain |
| Replaces | 182190 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.70
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 190 |
| Timing Chain Size | D67HR |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Operating Mode | hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Function | Centre Rod Assembly |
| Pipe Diameter | 50 mm |
| Cone Size | 26 mm |
| Rod/Strut | Push Rod |
| Outer diameter | 40 mm |
| Length | 857 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 150 mm |
| Outer diameter | 150 mm |
| Thickness | 89.6 mm |
| Inner diameter | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (27163)
- 1x Febi Wheel Bearing (27164)
- 1x Febi Shaft Seal, wheel hub (38868)
- 1x Febi Shaft Seal, wheel hub (27165)
£101.71
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Diff.Side | 28 |
| Min. Length | 964 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 87.5 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 40 |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Number of Chain Links | 84 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (44296)
- 1x Febi Tensioner, timing chain (182769)
- 1x Febi Guide, timing chain (178482)
- 1x Febi Guide, timing chain (182742)
£101.72
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179214 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.75
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Colour | Green |
| Function | Stabiliser Bar, suspension |
| Stabiliser Diameter | 22.5 mm |
| Type | Stabiliser Bar, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.75
Important compatibility info
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Placement on Vehicle | Front |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 6x Febi Screw (43413)
£101.77
Important compatibility info
| Length | 1920 mm |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt Set |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Units / Pulleys | incl. deflection pulley |
| Number of Deflection Rollers | 2 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Deflection/Guide Pulley, v-ribbed belt (30389)
- 1x Febi Belt Tensioner, v-ribbed belt (27135)
- 1x Febi V-Ribbed Belt (34136)
£101.77
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.77
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 328 mm |
| Thickness | 51.2 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.78
Important compatibility info
| Max. Length | 338 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 79 mm. 42 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.80
Important compatibility info
| Min. Length | 297 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 25 mm |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 330 mm |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.80
Important compatibility info
| Type | Bellow, air suspension |
| Placement on Vehicle | Rear Axle, Front Axle |
| Additional Information | with piston |
| Outer diameter | 270 mm. 227 mm |
| Function | Bellow, air suspension |
| Thickness | 220 mm. 480 mm |
| Rolling piston material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.80
Important compatibility info
| for OE number | 02M 911 024 PX |
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.7 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.82
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 182647 |
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.83
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 49424 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.84
Important compatibility info
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Operating Mode | Mechanical |
| Number of Connectors / Ports | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.85
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Steering arm type | Control Arm |
| Paired article numbers | 181132 |
| Material | Cast Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Cone Size | 28 mm |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.85
Important compatibility info
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information | with nuts |
| Outer diameter | 150 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 64 mm |
| Function | Joint, propshaft |
| Number of Holes | 8 |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (27582)
- 8x Febi Screw (19106)
- 8x Febi Washer (19107)
- 8x Febi Nut (19104)
£101.86
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184888 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 21 mm |
| External Thread Size | M14 x 1,5 |
| Cone Size | 16.6 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.88
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184883 |
| Cone Size | 16.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 21 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.88
Important compatibility info
| Width | 68 mm |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter | 89 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 30 mm |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.89
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.7 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.89
Important compatibility info
| Number of Connectors / Ports | 4 |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Function | Wiper Motor |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.95
Important compatibility info
| Bore Diameter | 6 mm |
| Fill Medium | Brake Fluid |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.95
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Operating Pressure | 11 bar |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.95
Important compatibility info
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 202 mm |
| Thickness | 240 mm. 600 mm |
| External Thread Size | M12 x 1,75, M20 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.96
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 274 mm |
| Thickness | 10.9 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Rotor Style | Solid |
| Additional Information 2 | with ABS sensor ring, with grease cap |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.97
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.97
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 142 |
| Function | Timing Chain Kit |
| Timing Chain Size | G53HP, G53HR |
| Type | Timing Chain Kit |
| Replaces | 47326 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (26012)
- 1x Febi Tensioner, timing chain (26751)
- 1x Febi Guide, timing chain (24287)
- 1x Febi Guide, timing chain (24286)
- 1x Febi Holder, timing chain tensioner (38015)
- 1x Febi Lock Cover, timing chain tensioner (mounting hole) (38327)
£102.04
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 645 mm |
| Min. Length | 405 mm |
| Pipe Diameter | 65 mm. 74 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.05
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 1840 mm |
| Number of circuits | 4 |
| External Thread Size | M18 x 1,5 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.05
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gasket/seal |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| for OE number | 1618.LN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.07
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Outer diameter | 313 mm |
| Height | 207 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.07
Important compatibility info
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Additional Information 2 | with bolts/screws |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 118 |
| Width | 16 mm |
| Units / Pulleys | incl. deflection pulley, incl. tensioner pulley |
| Type | Timing Belt Kit |
| Replaces | 49370 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47947)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (47600)
- 1x Febi Tensioner Pulley, timing belt (49559)
- 2x Febi Bolt, tensioner pulley (180196)
£102.07
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 144 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49768)
- 1x Febi Tensioner, timing chain (171517)
- 1x Febi Guide, timing chain (106677)
- 1x Febi Guide, timing chain (106799)
£102.09
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 376 mm |
| Thickness | 41.9 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 64.5 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.10
Important compatibility info
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Belts | with rounded tooth profile |
| Width | 23 mm |
| Number of Teeth | 150 |
| Surface | Coated |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19546)
- 1x Febi Tensioner Pulley, timing belt (38654)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (19292)
£102.12
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 17 mm |
| Length | 564 mm |
| Steering arm type | Control Arm, Trailing Arm |
| Material | Aluminium |
| Pipe Diameter | 46 mm |
| Hole Spacing | 113 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.13
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023