Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 379 mm |
| Outer diameter | 300 mm |
| Number of Connectors / Ports | 5 |
| Capacity | 20 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.45
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 938 mm |
| Wheel Sided Joint Diameter | 88.9 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.45
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1021 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.48
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 100 mm |
| Length | 813 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 17 mm |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.52
Important compatibility info
| Outer diameter | 400 mm |
| Thickness | 60 mm |
| Spanner Size | 32 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.53
Important compatibility info
| Material | Plastic |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 105 °C |
| Function | Thermostat Housing |
| Type | Thermostat Housing |
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor, with Temperature Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.54
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | non-steered leading axle |
| Outer diameter | 228 mm. 220 mm |
| Thickness | 190 mm. 445 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.58
Important compatibility info
| External Thread Size | M16 x 1,5, M14 x 2 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Thickness | 480 mm. 180 mm |
| Outer diameter | 228 mm. 195 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.63
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Injector |
| Type | Injector |
| Additional Information | with gaskets/seals |
| Colour Coding | Green |
Additional Information
Technical Information
Please compare the colour coding.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.64
Important compatibility info
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.64
Important compatibility info
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.65
Important compatibility info
| Additional Information | with nuts |
| Length | 887 mm |
| Rod/Strut | Push Rod |
| Cone Size | 32 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.66
Important compatibility info
| Material | Steel |
| Outer diameter | 149 mm |
| Thickness | 32 mm |
| Inner diameter | 31 mm |
| Number of Ribs | 5 |
| Number of Connectors / Ports | 6 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.67
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.67
Important compatibility info
| Inner length 1 | 912 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 722 mm |
| Outer length 1 | 1070 mm |
| Outer length 2 | 1017 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.67
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 136 mm |
| Outer diameter | 136 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Function | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Placement on Vehicle | Rear Axle |
| Stabiliser Diameter | 20 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174329)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
- 2x Febi Link/Coupling Rod, stabiliser bar (29461)
£104.69
Important compatibility info
| Placement on Vehicle | Front, Left |
| Number of Connectors / Ports | 2 |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.69
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 337 mm |
| Thickness | 61.9 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.74
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Brake Disc Thickness | 36 mm |
| Outer diameter | 385 mm |
| Thickness | 62.1 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Paired article numbers | 107502 |
| Minimum thickness | 34.4 mm |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.74
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.75
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front |
| Additional Information | with lock nut |
| Material | Aluminium |
| Additional Information 2 | with ball joint, with bearing, with screw |
| Steering arm type | Control Arm |
| Paired article numbers | 196744 |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (102429)
- 1x Febi Bolt, control arm (177857)
£104.75
Important compatibility info
| Voltage | 12 V |
| Function | Starter |
| Rated Power | 1.7 kW |
| Number of Teeth | 11 |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.76
Important compatibility info
| Minimum thickness | 27 mm |
| Function | Brake Disc |
| Placement on Vehicle | Front Axle |
| Outer diameter | 360 mm |
| Thickness | 81 mm |
| Brake Disc Thickness | 30 mm |
| Rotor Style | Internally Vented |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.80
Important compatibility info
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Function | Tilt Pump, driver cab |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Hole Spacing | 70 mm |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.83
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 72.1 mm |
| Outer diameter | 310.7 mm |
| Thickness | 88 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Number of mounting bores | 1 |
| Max.skimmed drum measure | 269.5 mm |
| Function | Brake Drum |
| Rim Hole Number | 5 -Hole |
| Inner Brake Drum Diameter | 268 mm |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.88
Important compatibility info
| Material | Plastic |
| Outer diameter | 70 mm |
| Inner diameter | 63 mm |
| Number of Connectors / Ports | 5 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.89
Important compatibility info
| External Thread Size | M16 x 2, M10 x 1,5, M22 x 1,5 |
| Outer diameter | 226 mm. 190 mm |
| Thickness | 533 mm. 138 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.95
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Bore Diameter | 42 mm |
| Rod/Strut | Pull Rod |
| Length | 415 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.96
Important compatibility info
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| Cone Size | 26 mm |
| Thickness | 103 mm |
| Outer diameter | 50 mm |
| Placement on Vehicle | Front Axle |
| Width | 50 mm |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Length | 1650 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.98
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.07
Important compatibility info
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Thickness | 175 mm |
| External Thread Size | M30 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.08
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 108820 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.12
Important compatibility info
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
| Placement on Vehicle | Driver side |
| Number of Connectors / Ports | 12 |
| Combi Switch Function | Window Regulator, Heated wing mirror on/off |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.14
Important compatibility info
| Port / Connector type | - |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.14
Important compatibility info
| Operating Mode | Hydraulic |
| Thickness | 54 mm |
| Function | Tensioner, timing belt |
| Outer diameter | 32 mm |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.19
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 124 |
| Timing Chain Size | G68V |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (104115)
- 1x Febi Tensioner, timing chain (48766)
- 1x Febi Guide, timing chain (188309)
£105.20
Important compatibility info
| Placement on Vehicle | steered leading axle |
| Length | 1025 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Guide Rod |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.21
Important compatibility info
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Thickness | 73.2 mm |
| Brake Disc Thickness | 30 mm |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
| Number of mounting bores | 1 |
| Outer diameter | 340 mm |
| Function | Brake Disc |
| Machining | High-carbon |
| Minimum thickness | 28.4 mm |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.22
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 193516 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 613 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.26
Important compatibility info
| Piston conrod diameter | 15 mm |
| Mounting points diameter | 16 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 645 mm |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top eye |
| Pipe Diameter | 54 mm. 63 mm |
| Min. Length | 461 mm |
| Shock Absorber Type | Oil Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.27
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Aluminium |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Additional Information | with electric motor |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 182955 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.31
Important compatibility info
| Type | Brake Caliper |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Right |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182954 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Aluminium |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.31
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 348 mm |
| Thickness | 80.9 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.31
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 145 |
| for OE number | 04L 109 119 D S7 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Tensioner, timing belt (170345)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
£105.34
Important compatibility info
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| for OE number | 2 853 196 |
| Cone Size | 30 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Length | 1743 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.35
Important compatibility info
| Number of mounting bores | 2 |
| External Teeth, Diff.Side | 29 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24.1,5 |
| Bolt Hole Circle Diameter | 131.3 mm |
| Bore Diameter | 11.3 mm |
| External Teeth, Wheel Side | 29 |
| Paired article numbers | 183462 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 90 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Function | Drive Shaft |
| Min. Length | 982 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.38
Important compatibility info
| Placement on Vehicle | Right Front, Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.44
Important compatibility info
| Additional Information | with lids |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.46
Important compatibility info
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 179213 |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.50
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023