Important compatibility info
Outer diameter | 123 mm |
Weight | 0.611 kg |
Inner diameter | 115 mm |
Function | Charge Air Hose |
Additional Information 2 | with clamps |
Extra Description | ProKit |
Type | Charge Air Hose |
Hose Length | 210 mm |
Wall Thickness | 4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (26516)
- 2x Febi Fastening Clamp, charge air hose (39030)
Important compatibility info
Function | Air Dryer, compressed-air system |
Weight | 3.8 kg |
Type | Air Dryer, compressed-air system |
Voltage | 24 V |
Additional Information 2 | with integrated oil separator, with dryer |
Rated Power | 100 W |
Cut-off Pressure | 12 bar |
Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Inner length 2 | 785 mm |
Weight | 0.848 kg |
Inner length 1 | 792 mm |
Outer length 1 | 1015 mm |
Outer length 2 | 1020 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 750 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 40 mm |
Mounting points diameter | 17 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 7.6 kg |
Hole Spacing | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.904 kg |
Type | Wiper Motor |
Placement on Vehicle | Rear |
Voltage | 12 V |
Function | Wiper Motor |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 70 A |
Belt Pulley Diameter | 54 mm |
Type | Alternator |
Function | Alternator |
Weight | 5.5 kg |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Thread Size | M16x1,5 |
External Teeth, Wheel Side | 36 |
Weight | 6.220 kg |
Min. Length | 473 mm |
Wheel Sided Joint Diameter | 97.9 mm |
Transmission-side joint diameter | 85 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side |
Weight | 1.834 kg |
Type | Camshaft |
Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 21100904 |
Number of Connectors / Ports | 2. 3 |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Screw length below head | 687 mm |
Weight | 0.820 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.8 kg |
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Type | Interior Blower |
Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023