Important compatibility info
Weight | 6.5 kg |
Placement on Vehicle | Front Axle, steered trailing axle |
Length | 281 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Push Rod |
Mounting points diameter | 22 mm. 40 mm |
Function | Control/Trailing Arm, wheel suspension |
Hole Spacing | 130 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Alternator |
Pulleys | with belt pulley |
Belt Pulley Diameter | 48 mm |
Alternator Charge Current | 80 A |
Weight | 4.95 kg |
Function | Alternator |
Voltage | 12 V |
Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 12.0 kg |
Cone Size | 30 mm |
Pipe Diameter | 42 mm |
Length | 1531 mm |
Placement on Vehicle | Front Axle |
Internal Thread Size | M30 x 1,5 |
Additional Information 2 | with crown nut |
Function | Tie Rod |
External Thread Size | M24 x 1,5 |
Type | Tie Rod |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Material | Grey Cast Iron |
Number of Wings | 8 |
Seal Material | Rubber |
Weight | 3.76 kg |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Additional Information 2 | with bolts, with seal ring |
for OE number | 5 0036 1919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, manual transmission |
Inner length 1 | 2923 mm |
Outer length 1 | 3250 mm |
Weight | 1.084 kg |
Type | Cable Pull, manual transmission |
for OE number | 81.32655.6322 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Weight | 0.918 kg |
Chain Type | Simplex, Closed chain |
Timing Chain Size | G53HR |
Number of Chain Links | 114 |
Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (37766)
- 1x Febi Tensioner, timing chain (49378)
- 1x Febi Guide, timing chain (49380)
- 1x Febi Guide, timing chain (49379)
- 1x Febi Gear/Sprocket, camshaft (178894)
- 1x Febi Sprocket, crankshaft (178532)
- 1x Febi Shaft Seal, crankshaft (174637)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 697 mm |
Additional Information 2 | with crown nut |
Rod/Strut | Push Rod |
Weight | 8.000 kg |
Cone Size | 30 mm |
Adjustable | adjustable |
Pipe Diameter | 52 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Weight | 2.5 kg |
Operating Mode | Mechanical |
Type | Shock Absorber, driver cab suspension |
Mounting points diameter | 12 mm. 14 mm |
Pipe Diameter | 42 mm |
Max. Length | 265 mm |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric-pneumatic |
Valve type | Solenoid Valve |
Function | EGR valve, exhaust control |
Weight | 0.4 kg |
Type | EGR valve, exhaust control |
for OE number | 51.25902.0130 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.915 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 167 mm |
Filter type | Filter Insert |
Weight | 3.30 kg |
Outer diameter | 303 mm |
Height | 525 mm |
Type | Air Filter |
Function | Air Filter |
for OE number | 1 869 994 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Solenoid valve, automatic transmission |
Weight | 0.074 kg |
Extra Description | febi Plus |
Function | Solenoid valve, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting bores distance | 80 mm |
Operating Pressure | 10 bar |
Function | Brake Valve, parking brake |
Number of Connectors / Ports | 3 |
Weight | 0.900 kg |
Internal Thread Size | M16 x 1,5, M6 x 1 |
Type | Brake Valve, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.05 kg |
Placement on Vehicle | Lower Front Axle, Rear |
Material | Cast Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.852 kg |
Units / Pulleys | incl. deflection pulley |
Additional Information | with belt tensioner for V-ribbed belt |
Function | V-Ribbed Belt Set |
Number of Ribs | 8 |
Length | 1635 mm |
Extra Description | ProKit |
Type | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Deflection/Guide Pulley, v-ribbed belt (30389)
- 1x Febi Belt Tensioner, v-ribbed belt (27135)
- 1x Febi V-Ribbed Belt (35508)
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Rod/Strut | Pull Rod |
Length | 317 mm |
Inner diameter | 12 mm |
Function | Rod/Strut, wheel suspension |
Type | Rod/Strut, wheel suspension |
Weight | 0.891 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Solenoid Valve |
Type | Solenoid Valve |
Weight | 0.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 179342 |
Weight | 0.7 kg |
Number of Connectors / Ports | 6 |
Function | Electric Motor, window regulator |
Placement on Vehicle | Right |
Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Aluminium |
Weight | 1.3 kg |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Electric Motor, window regulator |
Weight | 0.7 kg |
Number of Connectors / Ports | 6 |
Placement on Vehicle | Left |
Function | Electric Motor, window regulator |
Paired article numbers | 179340 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.478 kg |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Bore Diameter | 24 mm |
for OE number | 81.30715.6152 |
Fill Medium | Mineral Oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 286 mm. 239 mm |
Thickness | 192 mm. 483 mm |
External Thread Size | M22 x 1,5 |
Function | Bellow, air suspension |
Weight | 10.01 kg |
Type | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Master Cylinder, clutch |
Additional Information | with gasket/seal |
Bore Diameter | 16 mm |
Fill Medium | Brake Fluid |
Driver Position | for right-hand drive vehicles |
Type | Master Cylinder, clutch |
Weight | 0.264 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil sump |
External Thread Size | M6 x 1 |
Weight | 1.783 kg |
Additional Information 2 | with seal ring |
Extra Description | febi Plus |
Wet Sump Material | Aluminium |
Type | Oil sump |
Additional Information | with oil drain plug |
Length | 441 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.70 kg |
Thickness | 435 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Bellow, air suspension |
Internal Thread Size | M10 x 1,5, M12 x 1,75, M16 x 1,5 |
Rolling piston material | Plastic |
Type | Bellow, air suspension |
Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 228 mm |
Thickness | 290 mm. 500 mm |
Function | Bellow, air suspension |
External Thread Size | M16 x 1,5, M10 x 1,5 |
Type | Bellow, air suspension |
Weight | 9.1 kg |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, air suspension |
Outer diameter | 258 mm. 202 mm |
Thickness | 240 mm. 600 mm |
External Thread Size | M12 x 1,75, M20 x 1,5, M16 x 2 |
Weight | 9.5 kg |
Additional Information | with piston |
Rolling piston material | Plastic |
Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.128 kg |
Thread Size | M20x1,5 |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
External Teeth, Diff.Side | 22 |
Min. Length | 973 mm |
ABS Ring Diameter | 86 mm |
Wheel Sided Joint Diameter | 76.3 mm |
Transmission-side joint diameter | 75 mm |
Type | Drive Shaft |
Function | Drive Shaft |
External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 4.4 kg |
Outer diameter | 81 mm |
Bearing Type | Angular Ball Bearing |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Width | 136 mm |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Weight | 1.858 kg |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Additional Information | with gasket/seal |
Material | Plastic |
for OE number | 11 12 7 568 582 |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023