Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.11
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Housing material | Grey Cast Iron |
| Seal Material | Rubber, Paper |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.12
Important compatibility info
| Minimum thickness | 38 mm |
| Bolt Hole Circle Diameter | 144 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Surface | Coated |
| Function | Brake Disc |
| Number of Holes | 10 |
| Thickness | 99 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 375 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.16
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 872 mm |
| Wheel Sided Joint Diameter | 106 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.16
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.RL |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.18
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 181887 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.19
Important compatibility info
| Brake caliper piston diameter | 36 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181886 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.19
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Brake Disc Thickness | 10 mm |
| Thickness | 10 mm |
| Outer diameter | 270 mm |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring, with grease cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.20
Important compatibility info
| Function | Shock Absorber |
| Pipe Diameter | 74 mm. 63 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 14 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Placement on Vehicle | Front Axle, Rear Axle |
| Max. Length | 785 mm |
| Replaces | 20009 |
| Min. Length | 464 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.20
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 24 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 50.7 mm |
| Outer diameter | 330 mm |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 5 -Hole |
| Rotor Style | perforated/vented, slotted |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.20
Important compatibility info
| Number of Chain Links | 154 |
| Chain Type | Silent Chain, Closed chain |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.20
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 575 mm |
| Steering arm type | Trailing Arm, Triangular Control Arm (CV) |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.25
Important compatibility info
| External Thread Size | M33 x 3,5 |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Length | 265 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (104470)
- 1x Febi Bush, kingpin (104182)
- 1x Febi Nut (107297)
- 1x Febi Spacer, kingpin (107308)
- 1x Febi Spacer, kingpin (107309)
- 1x Febi Spacer, kingpin (107310)
- 1x Febi Spacer, kingpin (107311)
- 1x Febi Spacer, kingpin (107314)
- 1x Febi Bush, steering knuckle (107270)
- 1x Febi Seal Ring, steering knuckle (170501)
- 1x Febi Bush, steering knuckle (170502)
- 1x Febi Seal Ring, steering knuckle (170574)
- 1x Febi Pressure Piece, kingpin (171958)
- 1x Febi Pressure Piece, kingpin (172736)
£106.25
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 612 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.26
Important compatibility info
| Number of Connectors / Ports | 2 |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.28
Important compatibility info
| Placement on Vehicle | Front, Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.28
Important compatibility info
| Placement on Vehicle | Front, Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.28
Important compatibility info
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.28
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Cone Size | 16.6 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 20 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.31
Important compatibility info
| Number of Teeth | 11 |
| Rated Power | 2.3 kW |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023