Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 139 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 1.359 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (39200)
- 1x Febi Water Pump, engine cooling (21856)
£101.18
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196594 |
| Weight | 3.067 kg |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.19
Important compatibility info
| Weight | 2.901 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 717 mm |
| Min. Length | 435 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Mounting points diameter | 14 mm. 16 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber |
| Replaces | 20452; 20456 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.26
Important compatibility info
| Additional Information 2 | with rolling bearing |
| Inner diameter | 60 mm |
| Length | 252 mm |
| Bearing Type | Rolling Bearing |
| Weight | 3.797 kg |
| Hole Spacing | 220 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.28
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Weight | 8.755 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.32
Important compatibility info
| Function | Oil Pump |
| Weight | 1.275 kg |
| Additional Information | with gasket/seal |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.43
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 10.8 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 365 mm |
| Thickness | 75 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 17 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.51
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Function | Mounting, engine |
| Weight | 1.100 kg |
| Type | Mounting, engine |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.52
Important compatibility info
| Weight | 2.34 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1 543 751 |
| Hole Spacing | 222 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.57
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 176657 |
| Weight | 1.442 kg |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.57
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 1.442 kg |
| Placement on Vehicle | Left |
| Paired article numbers | 176656 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.57
Important compatibility info
| Weight | 11.27 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 337 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 67.5 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.57
Important compatibility info
| Weight | 9.4 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 155 mm. 220 mm |
| Thickness | 260 mm. 154 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.59
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 3 |
| Weight | 0.085 kg |
| for OE number | 010 153 82 28 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.60
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 0.001 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 919 mm |
| Wheel Sided Joint Diameter | 97 mm |
| Transmission-side joint diameter | 97 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.60
Important compatibility info
| Type | Timing Chain |
| Number of Chain Links | 110 |
| Timing Chain Size | G67HR-6 |
| Function | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Weight | 0.555 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.61
Important compatibility info
| Weight | 8.11 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 228 mm. 218 mm |
| Thickness | 160 mm. 370 mm |
| Function | Bellow, air suspension |
| External Thread Size | M14 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.64
Important compatibility info
| Type | Water Pump, engine cooling |
| Material | Cast Aluminium |
| Additional Information 2 | with seal ring |
| Weight | 1.25 kg |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Weight | 0.199 kg |
| Number of Connectors / Ports | 6 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Material | Plastic |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.31 kg |
| Width of castor bearing surface | 29 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 150 |
| Timing Chain Size | Z46-16 |
| Weight | 1.105 kg |
| Chain Type | Silent Chain, Closed chain |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48577)
- 1x Febi Tensioner, timing chain (40379)
- 1x Febi Guide, timing chain (36631)
- 1x Febi Guide, timing chain (36632)
- 1x Febi Gear/Sprocket, camshaft (104253)
- 1x Febi Shaft Seal, crankshaft (38238)
- 1x Febi Pulley Bolt (32025)
- 1x Febi Bolt, camshaft gear (46364)
£101.67
Important compatibility info
| Number of Connectors / Ports | 6 |
| Weight | 0.765 kg |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.69
Important compatibility info
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 651 090 01 48 |
| Number of Connectors / Ports | 4 |
| Weight | 0.194 kg |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.70
Important compatibility info
| Weight | 4.90 kg |
| Width | 38 mm |
| Outer diameter | 193 mm |
| Additional Information 2 | with spacer disc, with screw |
| Inner diameter | 18 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
Technical Information
The diamond-coated washer included in this kit has to be used to replace the formerly fitted washer.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26834)
- 1x Febi Washer, crankshaft pulley (31815)
- 1x Febi Pulley Bolt (17232)
£101.71
Important compatibility info
| Function | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Placement on Vehicle | Front Axle |
| Length | 1000 mm |
| Rod/Strut | Push Rod |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Weight | 10.69 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
| Placement on Vehicle | Driver side |
| Number of Connectors / Ports | 12 |
| Combi Switch Function | Window Regulator, Heated wing mirror on/off |
| Weight | 0.122 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Additional Information | with lids |
| Weight | 2.393 kg |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 132 |
| Function | Timing Chain |
| Weight | 0.980 kg |
| Type | Timing Chain |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Weight | 0.120 kg |
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Number of Ribs | 6 |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 56 mm |
| Weight | 5.5 kg |
| Function | Alternator |
| Type | Alternator |
| Voltage | 12 V |
| Pulleys | with belt pulley |
| for OE number | 5705.FX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023