Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| Weight | 12.488 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 872 mm |
| Wheel Sided Joint Diameter | 106 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.71
Important compatibility info
| Weight | 0.16 kg |
| Resistor Type | Hot-wire Sensor |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.80
Important compatibility info
| Weight | 3.35 kg |
| Placement on Vehicle | Front Axle |
| Length | 1013 mm |
| Function | Stabiliser Bar, suspension |
| Additional Information | with rubber mounts |
| Type | Stabiliser Bar, suspension |
| Stabiliser Diameter | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.80
Important compatibility info
| Weight | 1.55 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1 778 550 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.81
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Weight | 5.0 kg |
| External Thread Size | M20 x 2,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.87
Important compatibility info
| Function | Timing Chain Kit |
| Timing Chain Size | G53RT, G53RING-1 |
| Number of Chain Links | 124 |
| Chain Type | Simplex, Closed chain |
| Weight | 1.002 kg |
| Type | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31004)
- 1x Febi Tensioner, timing chain (101149)
- 1x Febi Guide, timing chain (107854)
- 1x Febi Guide, timing chain (107855)
- 1x Febi Gear/Sprocket, camshaft (101157)
£110.02
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 12.0 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.03
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.671 kg |
| for OE number | 200 993 03 00 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 154 |
| Type | Timing Chain Kit |
| Part number of the recommended special tools | 193083 |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (186214)
- 1x Febi Tensioner, timing chain (181992)
- 1x Febi Guide, timing chain (181668)
- 1x Febi Guide, timing chain (187691)
- 1x Febi Guide, timing chain (184828)
£110.07
Important compatibility info
| Weight | 1.47 kg |
| Placement on Vehicle | Front, Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.16
Important compatibility info
| Thickness | 205 mm |
| Number of Holes | 4 |
| Function | Bush, parabolic spring |
| Length | 220 mm |
| Width | 135 mm |
| Weight | 13.0 kg |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.18
Important compatibility info
| Placement on Vehicle | Left |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 1.414 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.23
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Weight | 0.640 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.23
Important compatibility info
| Weight | 4.42 kg |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| for OE number | 204 326 10 65 S1 |
| Additional Information 2 | with coupling rod |
| Stabiliser Diameter | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171133)
- 1x Febi Link/Coupling Rod, stabiliser bar (29694)
- 1x Febi Link/Coupling Rod, stabiliser bar (29695)
- 2x Febi Nut (06859)
£110.25
Important compatibility info
| Inner diameter | 15 mm |
| Outer diameter | 55 mm |
| Length | 75 mm |
| Type | Repair Kit, reversing lever |
| Mounting points diameter | 14 mm |
| Additional Information | with counter nut |
| Function | Repair Kit, reversing lever |
| Weight | 4.968 kg |
| Internal Thread Size | M6 x 1 |
| External Thread Size | M30 x 3,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.27
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 2.680 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 21810-2W200 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.27
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 11.16 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 376 mm |
| Thickness | 41.9 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 64.5 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.33
Important compatibility info
| Weight | 4.62 kg |
| Replaces | 20455 |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 647 mm |
| Min. Length | 401 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 600 mm |
| Min. Length | 364 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 3.64 kg |
| Replaces | 20015 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Max. Length | 834 mm |
| Min. Length | 499 mm |
| Pipe Diameter | 73 mm. 54 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 5.85 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20143 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Max. Length | 478 mm |
| Min. Length | 324 mm |
| Weight | 5.1 kg |
| Pipe Diameter | 80 mm. 70 mm |
| Type | Shock Absorber |
| Replaces | 20272 |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023