Proud to be a UK-based company
Contact us
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.130 kg |
| Type | Master Cylinder, clutch |
| for OE number | 21 52 6 758 820 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.57
Important compatibility info
| Housing Type | with housing |
| Weight | 0.191 kg |
| for OE number | 06J 906 461 D |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.58
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 4M0 199 371 GD |
| Number of Connectors / Ports | 2 |
| Weight | 2.020 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.60
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 80 mm |
| Outer diameter | 133 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 25 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 2.1 kg |
| Additional Information | with fastening/mounting material |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Weight | 0.633 kg |
| External Thread Size | M16 x 1,5 |
| Function | Hydraulic Hose, steering |
| Type | Hydraulic Hose, steering |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Wheel Bearing |
| Inner diameter | 78 mm |
| Bearing Type | Tapered Roller Bearing |
| Width | 90 mm |
| Outer diameter | 130 mm |
| Weight | 4.45 kg |
| Type | Wheel Bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Weight | 0.760 kg |
| for OE number | 81.27203.6020 |
| Number of Connectors / Ports | 2. 4 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 610 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M16x1,5 |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 5.684 kg |
| Number of mounting bores | 6 |
| Min. Length | 472 mm |
| Wheel Sided Joint Diameter | 89.5 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 31 |
| Thread Size | M24x2,0 |
| Min. Length | 1093 mm |
| External Teeth, Diff.Side | 41 |
| Weight | 13.440 kg |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 99 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Weight | 1.451 kg |
| Placement on Vehicle | Exhaust Side |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Weight | 3.800 kg |
| Mounting points diameter | 10 mm |
| Type | Manifold, exhaust system |
| Function | Manifold, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Inner length 2 | 785 mm |
| Inner length 1 | 715 mm |
| Weight | 0.972 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1063 mm |
| Outer length 2 | 1050 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Width | 24 mm |
| Number of Teeth | 166 |
| Belts | with trapezoidal tooth profile |
| Weight | 1.378 kg |
| Type | Water Pump & Timing Belt Kit |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
| Water pump impeller material | Plastic |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (10981)
- 1x Febi Tensioner Pulley, timing belt (17767)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (10649)
- 1x Febi Water Pump, engine cooling (34519)
£111.61
Important compatibility info
| Function | Drive Shaft |
| Transmission-side joint diameter | 99 mm |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 98 mm |
| Min. Length | 755 mm |
| External Teeth, Diff.Side | 41 |
| Weight | 9.930 kg |
| External Teeth, Wheel Side | 31 |
| Thread Size | M24x2,0 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Mounting points diameter | 14 mm. 35 mm |
| Pipe Diameter | 45 mm |
| Placement on Vehicle | Front |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Weight | 3.8 kg |
| Min. Length | 103 mm |
| Max. Length | 362 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Weight | 10.78 kg |
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Replaces | 03584 |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 57 mm |
| Weight | 5.0 kg |
| Current Strength | 70 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 101.6 mm |
| Outer diameter | 92.2 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 35 mm |
| Weight | 3.482 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Weight | 6.103 kg |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Operating Mode | Manual |
| Spanner Size | 22 |
| Number of Connectors / Ports | 2 |
| Weight | 2.6 kg |
| Type | Tilt Pump, driver cab |
| Hole Spacing | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023