Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 555 mm |
| Width | 348 mm |
| Material | PP (Polypropylene) |
| Thickness | 159 mm |
| Function | Expansion Tank, coolant |
| Internal Thread Size | M72 x 1,5 |
| External Thread Size | M48 x 1,5 |
| Fill quantity | 8.5 l |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.01
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Heating / Cooling | for vehicles without oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.01
Important compatibility info
| Type | Pump, fuel pre-supply |
| Function | Pump, fuel pre-supply |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.12
Important compatibility info
| External Teeth, Diff.Side | 27 |
| Min. Length | 550 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 82.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 31 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.23
Important compatibility info
| Length | 840 mm |
| Outer diameter | 52.0 mm |
| Rod/Strut | Push Rod |
| Outer thread | M27 x 1,5 mm |
| Driver Position | for left-hand drive vehicles |
| Weight | 9.42 kg |
| Inner thread | M30 x 1,5 RHT mm |
| Cone Size | 32 mm |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
£121.29
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 155 mm. 280 mm |
| Thickness | 155 mm. 310 mm |
| Function | Bellow, air suspension |
| Port / Connector type | Voss 232 |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.30
Important compatibility info
| Material | Plastic |
| Additional Information 2 | with oil sump gasket |
| Additional Information | with oil drain plug |
| Length | 475 mm |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
| Type | Oil sump |
| Function | Oil sump |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.35
Important compatibility info
| Width of castor bearing surface | 22 mm |
| Outer diameter | 76.4 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.37
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.43
Important compatibility info
| Outer diameter | 180 mm |
| Thickness | 42 mm |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.47
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Outer diameter | 259 mm. 226 mm |
| Thickness | 249 mm. 510 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.48
Important compatibility info
| Function | Cylinder Head, air compressor |
| Length | 152 mm |
| Width | 140 mm |
| Thickness | 64 mm |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.50
Important compatibility info
| Outer diameter | 560 mm |
| Thickness | 100 mm |
| Number of Wings | 6 |
| Function | Fan Wheel, engine cooling |
| Type | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.50
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 275 mm |
| Min. Length | 233 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.50
Important compatibility info
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Placement on Vehicle | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Material | Plastic |
| Extra Description | febi Plus |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.50
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 55 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.50
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 90. 70 |
| Function | Timing Chain Kit |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain Kit |
| for OE number | 021 109 503 D S1 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25364)
- 1x Febi Chain, intermediate shaft (09585)
- 1x Febi Guide, timing chain (25182)
- 1x Febi Guide, timing chain (25222)
- 1x Febi Guide, timing chain (25220)
- 1x Febi Tensioner, timing chain (25240)
- 1x Febi Tensioner, timing chain (25238)
£121.51
Important compatibility info
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm |
| Rod/Strut | Coupling Rod |
| Cone Size | 38 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.51
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 596 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.51
Important compatibility info
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 55 mm |
| Type | Alternator |
| Voltage | 12 V |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.51
Important compatibility info
| Pipe Diameter | 42 mm |
| Placement on Vehicle | Front Axle |
| Length | 1620 mm |
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 LHT |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.51
Important compatibility info
| Steering arm type | Trailing Arm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | both sides |
| Length | 625 mm |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.51
Important compatibility info
| Operating pressure to | 8 bar |
| Pulleys | with belt pulley |
| for OE number | 49110-3X01A |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Outer diameter | 17 mm |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.51
Important compatibility info
| Type | Hydraulic Pump, steering |
| Operating pressure to | 8 bar |
| Function | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Pulleys | with belt pulley |
| Operating Mode | Hydraulic |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.51
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
| Belt Pulley Diameter | 55 mm |
| Alternator Charge Current | 120 A |
| Pulleys | with belt pulley |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.51
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 113.85 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 38 |
| Number of mounting bores | 6 |
| Number of Teeth, ABS ring | 45 |
| Min. Length | 551 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.51
Important compatibility info
| Length | 479 mm |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Height | 169 mm |
| Width | 296 mm |
| Material | Plastic |
| Colour | Black |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.51
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 182 |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (181684)
- 1x Febi Tensioner, timing chain (180231)
- 1x Febi Guide, timing chain (178844)
- 1x Febi Guide, timing chain (178525)
- 1x Febi Guide, timing chain (178591)
- 1x Febi Sprocket, crankshaft (181669)
£121.52
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.52
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 31 |
| Min. Length | 580 mm |
| Wheel Sided Joint Diameter | 102.8 mm |
| Transmission-side joint diameter | 93.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.52
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023