Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 60 mm |
| Function | Alternator |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.04
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Outer diameter | 57 mm |
| Material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.11
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 2 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 82 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.22
Important compatibility info
| Function | Shock Absorber |
| Pipe Diameter | 76 mm. 63.4 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 635 mm |
| Min. Length | 417 mm |
| Shock Absorber Type | Oil Pressure |
| Replaces | 20146 |
| Placement on Vehicle | Front Axle |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.27
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 659 mm |
| Min. Length | 430 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Mounting points diameter | 24 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.27
Important compatibility info
| Placement on Vehicle | non-steered trailing axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Piston conrod diameter | 15 mm |
| Mounting points diameter | 28 mm. 16 mm |
| Min. Length | 487 mm |
| Pipe Diameter | 54 mm. 63 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 687 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.27
Important compatibility info
| Function | Shock Absorber |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 869 mm |
| Min. Length | 521 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.27
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.29
Important compatibility info
| Placement on Vehicle | Right Front |
| for OE number | 961 241 58 13 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.36
Important compatibility info
| Placement on Vehicle | Intake Side |
| Inner diameter | 13 mm |
| Number of Teeth | 46 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.37
Important compatibility info
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.38
Important compatibility info
| Material | Aluminium |
| Function | Cylinder Head Cover |
| Additional Information | without gasket/seal |
| Extra Description | febi Plus |
| Heating / Cooling | without breather valve |
| Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.38
Important compatibility info
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182271 |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.38
Important compatibility info
| Mounting points diameter | 14 mm |
| Min. Length | 460 mm |
| Function | Shock Absorber |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Max. Length | 760 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Pipe Diameter | 53 mm. 45 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.45
Important compatibility info
| Width | 68 mm |
| Outer diameter | 173 mm |
| Inner diameter | 37 mm |
| Number of Ribs | 6 |
| Parameter | 4PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with bolts/screws |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (32220)
£120.48
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 186 |
| Function | Timing Chain Kit |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (09277)
- 1x Febi Guide, timing chain (10413)
- 3x Febi Guide, timing chain (10411)
- 1x Febi Guide, timing chain (10414)
- 1x Febi Guide, timing chain (10412)
- 1x Febi Tensioner, timing chain (02135)
£120.48
Important compatibility info
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber/Metal |
| Water pump impeller material | Metal |
| Number of Wings | 6 |
| Number of Teeth | 6 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 997 106 011 06 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.48
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 53.7 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.3 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | solid, two-piece brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.50
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1734 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Internal Thread Size | M30 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.51
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | 55229959 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.51
Important compatibility info
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 184 |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (181686)
- 1x Febi Tensioner, timing chain (181600)
- 1x Febi Guide, timing chain (179384)
- 1x Febi Guide, timing chain (179395)
- 1x Febi Guide, timing chain (178591)
- 1x Febi Sprocket, crankshaft (181669)
£120.51
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 125 A |
| Belt Pulley Diameter | 71 mm |
| Current Strength | 125 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.51
Important compatibility info
| Function | EGR valve, exhaust control |
| Internal Thread Size | M12 x 1,5, M14 x 1,5 |
| Valve type | Solenoid Valve |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 3 |
| Type | EGR valve, exhaust control |
| Voltage | 24 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.51
Important compatibility info
| Function | Release Fork, clutch |
| Extra Description | febi Plus |
| Type | Release Fork, clutch |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Release Fork, clutch (30287)
- 1x Febi Bearing Bracket, release fork (32381)
- 1x Febi Bearing, clutch lever (12260)
- 2x Febi Circlip, kingpin (02668)
- 2x Febi Shaft Seal, clutch release bearing shaft (32481)
- 1x Febi Bolt, release fork (31868)
- 2x Febi Circlip (05336)
£120.51
Important compatibility info
| Internal Thread Size | M38 x 1,5 LHT |
| Type | Centre Rod Assembly |
| Cone Size | 30 mm |
| Extra Description | ProKit |
| Pipe Diameter | 62 mm |
| Additional Information | with nuts |
| External Thread Size | M24 x 1,5 |
| Function | Centre Rod Assembly |
| Width | 40 mm |
| Length | 884 mm |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Thickness | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.52
Important compatibility info
| Hole Spacing | 70 mm |
| Suction side external thread size | M12 x 1,5 |
| Internal Thread Size | M10 x 1,5 |
| Operating Mode | Manual |
| Number of Connectors / Ports | 3 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.52
Important compatibility info
| External Thread Size | M14 x 2, M10 x 1 |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Fork |
| Max. Length | 382 mm |
| Pipe Diameter | 62 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.52
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 185905 |
| Cone Size 2 | 28 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.52
Important compatibility info
| Function | Starter |
| Rated Power | 2 kW |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.52
Important compatibility info
| Width | 157 mm |
| Outer diameter | 157 mm |
| Inner diameter | 9 mm |
| Number of Ribs | 4 |
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.52
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023