Important compatibility info
| Material | Metal |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 128 mm |
| Additional Information 2 | with nut |
| Spanner Size | 21 |
| Paired article numbers | 183510 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Grey Cast Iron |
| Additional Information | with seal rings |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal, Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 100 mm |
| Outer diameter | 140 mm |
| Additional Information 2 | with ABS sensor ring |
| Inner diameter | 55 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Water Pump, engine cooling |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Number of Wings | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 77 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 54 mm |
| Inner diameter | 17 mm |
| Mounting points diameter | 6.8 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 174. 82. 72 |
| Timing Chain Size | G53HR, G68HRF-5 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (180445)
- 1x Febi Tensioner, timing chain (184858)
- 1x Febi Guide, timing chain (188227)
- 1x Febi Guide, timing chain (194900)
- 1x Febi Guide, timing chain (184854)
- 1x Febi Guide, timing chain (193855)
- 1x Febi Timing Chain (180442)
- 1x Febi Guide, timing chain (184853)
- 1x Febi Tensioner, timing chain (188704)
- 1x Febi Chain, oil pump drive (46268)
- 1x Febi Chain Tensioner, oil pump drive (184857)
- 1x Febi Rail, oil pump drive chain (194588)
Important compatibility info
| Outer diameter | 72.5 mm |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 29 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | LF17-15-980E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Belt |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 119 |
| Width | 25.4 mm |
| Type | Timing Belt |
| Replaces | 25218 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Timing Belt (48288)
- 1x Febi Tensioner Pulley, timing belt (47604)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
Important compatibility info
| Replaces | 19345 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 98 mm |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Width | 61.5 mm |
| Outer diameter | 117 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 30 mm |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Diameter | 18 mm |
| Eject Force | 870 N |
| Piston conrod diameter | 10 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, boot/cargo area |
| Stroke | 241 mm |
| Type | Gas Spring, boot/cargo area |
| Housing length | 372 mm |
| Placement on Vehicle | both sides |
| Length | 649 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| for OE number | 8E0 261 431 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 38 mm |
| Inner diameter | 19 mm |
| Placement on Vehicle | Rear Axle |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 40 mm. 52 mm |
| Thickness | 60 mm |
| Inner diameter | 10 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
| Paired article numbers | 180980 |
| Placement on Vehicle | Front Axle Left |
| Spanner Size | 21 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 51 mm |
| Width | 26 mm |
| Thickness | 23 mm |
| Number of Connectors / Ports | 2 |
| Function | Knock Sensor |
| Type | Knock Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 19.1 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Cast Iron |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















