Important compatibility info
Placement on Vehicle | Rear Axle Left |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Width | 60 mm |
Inner diameter | 26 mm |
Outer diameter | 72 mm |
Paired article numbers | 179849 |
Weight | 2.972 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 121 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 62 mm |
Weight | 11.3 kg |
Placement on Vehicle | Front Axle |
Length | 845 mm |
Width | 68 mm |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M38 x 1,5 RHT |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 85 A |
Belt Pulley Diameter | 48 mm |
Weight | 4.6 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Grey Cast Iron |
Material | Grey Cast Iron |
Number of Wings | 12 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Weight | 7.075 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Alternator |
Type | Alternator |
Belt Pulley Diameter | 49 mm |
Weight | 5.5 kg |
Pulleys | with belt pulley |
Alternator Charge Current | 90 A |
Number of Ribs | 6 |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Rotor Style | Vented |
Surface | Coated |
Brake Disc Thickness | 30 mm |
Weight | 10.9 kg |
Type | Brake Disc Rotor |
Minimum thickness | 28.4 mm |
Bolt Hole Circle Diameter | 112 mm |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Outer diameter | 335 mm |
Thickness | 45 mm |
Centering Diameter | 67 mm |
Number of mounting bores | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Weight | 2.463 kg |
Function | Water Pump, engine cooling |
Seal Material | Rubber |
Water pump impeller material | Metal |
Number of Wings | 4 |
Material | Cast Aluminium |
Type | Water Pump, engine cooling |
Replaces | 10647; 12367 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.456 kg |
Chain Type | Duplex, Closed chain |
Number of Chain Links | 82 |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 258 mm. 197 mm |
Thickness | 267 mm. 655 mm |
Function | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
External Thread Size | M16 x 1,5, M10 x 1,5 |
Type | Bellow, air suspension |
Weight | 9.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.47 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 258 mm. 230 mm |
Thickness | 458 mm. 138 mm |
Function | Bellow, air suspension |
External Thread Size | M16 x 1,5 |
Additional Information | with piston |
Type | Bellow, air suspension |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M22 x 1,5 |
Function | Air Tank, compressed-air system |
Type | Air Tank, compressed-air system |
Number of Connectors / Ports | 4 |
Weight | 8.1 kg |
Capacity | 20 l |
Operating Pressure | 15.5 bar |
Outer diameter | 206 mm |
Material | Steel |
Length | 691 mm |
Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Number of Connectors / Ports | 5 |
Function | EGR Valve |
Placement on Vehicle | Upper |
for OE number | 14 71 053 08R |
Type | EGR Valve |
Weight | 0.650 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Min. Length | 895 mm |
Weight | 6.57 kg |
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Wheel Side | 25 |
Thread Size | M18x1,5 |
Paired article numbers | 193513 |
External Teeth, Diff.Side | 22 |
Additional Information | with axle nut |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Pressure Converter, exhaust control |
Weight | 0.21 kg |
Operating Mode | Electric-pneumatic |
Extra Description | febi Plus |
Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Weight | 4.182 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Left, both sides |
Weight | 4.267 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Weight | 4.195 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, outer |
Length | 914 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Adjustable | Adjustable on one side |
Cone Size | 30 mm |
Weight | 12.020 kg |
Rod/Strut | Guide Rod |
Thread Size | M24 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Weight | 0.02 kg |
for OE number | 13 62 8 570 107 |
Housing Type | without housing |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 1 |
Function | Fuel Pump |
Length | 88 mm |
Weight | 2.610 kg |
Internal Thread Size | M16 x 1,5 |
Operating Mode | Mechanical |
Type | Fuel Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023