Important compatibility info
| Number of grooves | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Housing material | Grey Cast Iron |
| Seal Material | Rubber |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| for OE number | 58 0193 1312 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 95 mm |
| Outer diameter | 140 mm |
| Additional Information 2 | with ABS sensor ring |
| Inner diameter | 50 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14522 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 50 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | Coated |
| Number of Teeth | 160 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 03L 198 119 F S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (37021)
- 1x Febi Water Pump, engine cooling (36048)
Important compatibility info
| Additional Information 2 | with Temperature Switch |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 87 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 789 mm |
| Wheel Sided Joint Diameter | 71.9 mm |
| Transmission-side joint diameter | 72 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of Wings | 5 |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 50 mm |
| Adjustable | Adjustable on one side |
| Placement on Vehicle | Front Axle |
| Cone Size | 30 mm |
| Length | 635 mm |
| Internal Thread Size | M38 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M14x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.2 mm |
| External Teeth, Wheel Side | 33 |
| Number of mounting bores | 6 |
| Min. Length | 633 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 31 |
| Min. Length | 552 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 31 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 168 mm |
| Thickness | 188 mm. 560 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5, M10 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Min. Length | 569 mm |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 107.8 mm |
| Number of mounting bores | 6 |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M8 x 1,25, M22 x 1,5 |
| Placement on Vehicle | non-steered trailing axle |
| Outer diameter | 286 mm |
| Thickness | 262 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 51 mm |
| Outer diameter | 88 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Outer diameter 1 | 79 mm |
| Outer diameter 2 | 143 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 310 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
| for OE number | 001 830 87 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Units / Pulleys | incl. deflection pulley |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
| Length 1 | 1041 mm |
| Length 2 | 1815 mm |
| Number of ribs 2 | 12 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (40316)
- 1x Febi V-Ribbed Belt (29117)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (22974)
- 1x Febi Belt Tensioner, v-ribbed belt (22975)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















